[PATCH v4 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Varadarajan Narayanan]

Add USB phy and controller related nodes

Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
---
 Changes in v4:
	- Use newer bindings without subnodes
	- Fix coding style issues

 Changes in v3:
	- Insert the nodes at proper location

 Changes in v2:
	- Fixed issues flagged by Krzysztof
	- Fix issues reported by make dtbs_check
	- Remove NOC related clocks (to be added with proper
	  interconnect support)
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 83 +++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 2bb4053..5379c25 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -215,6 +215,45 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		qusb_phy_0: phy at 7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy at 7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+
+			#phy-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+		};
+
 		pcie0_phy: phy at 84000 {
 			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
 			reg = <0x00084000 0x1bc>; /* Serdes PLL */
@@ -436,6 +475,50 @@
 			status = "disabled";
 		};
 
+		usb3: usb3 at 8a00000 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "sys_noc_axi",
+				      "anoc_axi",
+				      "master",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			dwc_0: usb at 8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller at b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
-- 
2.7.4