[PATCH 40/41] ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Mar 23 19:25:13 PDT 2023
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 29 +++++++++++------------------
1 file changed, 11 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 192f9f94bc8b..87354317b9df 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -231,31 +231,24 @@ usb_hsphy: phy at ff4000 {
usb_qmpphy: phy at ff6000 {
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
- reg = <0x00ff6000 0x1c8>;
+ reg = <0x00ff6000 0x2000>;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_EN>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3PHY_PHY_BCR>,
<&gcc GCC_USB3_PHY_BCR>;
reset-names = "phy", "common";
-
- usb_ssphy: phy at ff6200 {
- reg = <0x00ff6e00 0x160>,
- <0x00ff7000 0x1ec>,
- <0x00ff6200 0x1e00>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
};
system_noc: interconnect at 1620000 {
@@ -392,7 +385,7 @@ usb_dwc3: usb at a600000 {
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_hsphy>, <&usb_ssphy>;
+ phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
--
2.30.2
More information about the linux-phy
mailing list