[PATCH 34/41] arm64: dts: qcom: sc7280: switch PCIe QMP PHY to new style of bindings
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Mar 23 19:25:07 PDT 2023
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ++++++++++------------------
1 file changed, 12 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 62885ac3f11e..9d28b087c47b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -848,7 +848,7 @@ gcc: clock-controller at 100000 {
reg = <0 0x00100000 0 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
- <0>, <&pcie1_lane>,
+ <0>, <&pcie1_phy>,
<0>, <0>, <0>, <0>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
"pcie_0_pipe_clk", "pcie_1_pipe_clk",
@@ -2099,7 +2099,7 @@ pcie1: pci at 1c08000 {
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
- <&pcie1_lane>,
+ <&pcie1_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2133,7 +2133,7 @@ pcie1: pci at 1c08000 {
power-domains = <&gcc GCC_PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
pinctrl-names = "default";
@@ -2151,15 +2151,18 @@ pcie1: pci at 1c08000 {
pcie1_phy: phy at 1c0e000 {
compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
- reg = <0 0x01c0e000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x1000>;
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_EN>,
- <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen", "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2168,21 +2171,6 @@ pcie1_phy: phy at 1c0e000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy at 1c0e200 {
- reg = <0 0x01c0e200 0 0x170>,
- <0 0x01c0e400 0 0x200>,
- <0 0x01c0ea00 0 0x1f0>,
- <0 0x01c0e600 0 0x170>,
- <0 0x01c0e800 0 0x200>,
- <0 0x01c0ee00 0 0xf4>;
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
ipa: ipa at 1e40000 {
--
2.30.2
More information about the linux-phy
mailing list