[PATCH 19/41] arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 54 +++++++++-------------------
 1 file changed, 17 insertions(+), 37 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 5e6f9f441f1a..62885ac3f11e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -3327,49 +3328,27 @@ usb_2_hsphy: phy at 88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper at 88e9000 {
+		usb_1_qmpphy: phy at 88e8000 {
 			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
 				     "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy at 88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy at 88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2: usb at 8cf8800 {
@@ -3694,7 +3673,7 @@ usb_1_dwc3: usb at a600000 {
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3799,8 +3778,8 @@ dispcc: clock-controller at af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
 				 <&mdss_edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -4138,8 +4117,9 @@ mdss_dp: displayport-controller at ae90000 {
 						"stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
-- 
2.30.2