[PATCH 15/41] arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Thu Mar 23 19:24:48 PDT 2023


Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 67 +++++++++++-----------------
 1 file changed, 25 insertions(+), 42 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 9491be4a6bf0..c29bbd5c6fd5 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3391,69 +3391,52 @@ usb_2_hsphy: phy at 88e3000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy at 88e9000 {
+		usb_1_qmpphy: phy at 88e8000 {
 			compatible = "qcom,sm8150-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x10>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
-
-			usb_1_ssphy: phy at 88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
 		};
 
 		usb_2_qmpphy: phy at 88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x1000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
 				 <&gcc GCC_USB3_PHY_SEC_BCR>;
 			reset-names = "phy", "common";
-
-			usb_2_ssphy: phy at 88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		sdhc_2: mmc at 8804000 {
@@ -3559,7 +3542,7 @@ usb_1_dwc3: usb at a600000 {
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3608,7 +3591,7 @@ usb_2_dwc3: usb at a800000 {
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
-- 
2.30.2




More information about the linux-phy mailing list