[PATCH] phy: bcm63xx-usbh: Use dev_err_probe()

[ye.xingchen at zte.com.cn]

From: Ye Xingchen <ye.xingchen at zte.com.cn>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Ye Xingchen <ye.xingchen at zte.com.cn>
---
 drivers/phy/broadcom/phy-bcm63xx-usbh.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
index 6c05ba8b08be..16e23bef2498 100644
--- a/drivers/phy/broadcom/phy-bcm63xx-usbh.c
+++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
@@ -396,11 +396,8 @@ static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(usbh->base);

 	usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
-	if (IS_ERR(usbh->reset)) {
-		if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get reset\n");
-		return PTR_ERR(usbh->reset);
-	}
+	if (IS_ERR(usbh->reset))
+		return dev_err_probe(dev, PTR_ERR(usbh->reset), "failed to get reset\n");

 	usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
 	if (IS_ERR(usbh->usbh_clk))
-- 
2.25.1