[PATCH v2 1/3] dt-bindings: phy: Add StarFive JH7110 USB dt-binding
Minda Chen
minda.chen at starfivetech.com
Wed Mar 8 20:10:06 PST 2023
On 2023/3/9 2:12, Rob Herring wrote:
> On Wed, Mar 08, 2023 at 04:27:58PM +0800, Minda Chen wrote:
>> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
>> USB controller is cadence USB 3.0 IP.
>>
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> ---
>> .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++
>> 1 file changed, 158 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>> new file mode 100644
>> index 000000000000..daa88d065deb
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>
> Filename should match the compatible. The filename seems more correct
> than the compatible...
>
[1] jh7110 USB dts configure is similar to Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
But we have PHY (10200000). So I will add Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
as a wrap level.
starfive,jh7110-usb-phy.yaml contains only phy setting.
>> @@ -0,0 +1,158 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive USB 2.0 and 3.0 PHY
>> +
>> +maintainers:
>> + - Minda Chen<minda.chen at starfivetech.com>
>> +
>> +properties:
>> + compatible:
>> + items:
>> + - const: starfive,jh7110-usb
>
> What's the USB controller called?
>
I will change to "starfive,jh7110-usb-phy"
>> +
>> + reg:
>> + maxItems: 2
>> +
>> + reg-names:
>> + items:
>> + - const: usb3
>> + - const: usb2
>> +
>> + clocks:
>> + items:
>> + - description: usb 125m clock
>> + - description: app 125m clock
>> + - description: lpm clock
>> + - description: stb clock
>> + - description: apb clock
>> + - description: axi clock
>> + - description: utmi apb clock
>> +
>> + clock-names:
>> + items:
>> + - const: usb_125m
>> + - const: usb0_app_125
>> + - const: usb0_lpm
>> + - const: usb0_stb
>> + - const: usb0_apb
>> + - const: usb0_axi
>> + - const: usb0_utmi_apb
>
> usb_ and usb0_ is redundant, drop.
>
ok
>> +
>> + resets:
>> + items:
>> + - description: USB0_PWRUP reset
>> + - description: USB0_APB reset
>> + - description: USB0_AXI reset
>> + - description: USB0_UTMI_APB reset
>> +
>> + starfive,sys-syscon:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + items:
>> + items:
>
ok
> Are there multiple entries of phandle+offset because this says there
> are. You want '- items:' here to limit it to 1 phandle+offset.
>
>> + - description: phandle to System Register Controller sys_syscon node.
>> + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB.
>> + description:
>> + The phandle to System Register Controller syscon node and the offset
>> + of SYS_SYSCONSAIF__SYSCFG register for USB.
>> +
>> + starfive,stg-syscon:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + items:
>> + items:
>
> Same here.
>
ok
>> + - description: phandle to System Register Controller stg_syscon node.
>> + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> + description:
>> + The phandle to System Register Controller syscon node and the offset
>> + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset
>> + for USB.
>> +
>> + dr_mode:
>
> Usually this belongs in the controller node.
>
cdns3 usb controller IP default set to host mode. If cdns3 usb controller "dr_mode"
set to "peripheral", cdns3 controller can't be registered.
in driver/usb/cdns3/core.c
132 } else if (cdns->dr_mode != dr_mode) {
133 dev_err(dev, "Incorrect DRD configuration\n");
134 return -EINVAL;
135 }
If dr_mode is not set in int wrap level, peripheral mode can not be work.
And I see other USB PHY contain dr-mode setting.
>> + description: PHY mode.
>> + enum:
>> + - host
>> + - peripheral
>> + - otg
>> +
>> + "#address-cells":
>> + maximum: 2
>> +
>> + "#size-cells":
>> + maximum: 2
>> +
>> + ranges: true
>> +
>> + starfive,usb2-only:
>> + type: boolean
>> + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only
>
> The 'maximum-speed' property in the controller should be enough. Why is
> this needed.
>
maybe I can delete this setting.
> Being a PHY, you are missing #phy-cells.
>
ok
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - reg-names
>> + - clocks
>> + - clock-names
>> + - resets
>> + - starfive,sys-syscon
>> + - starfive,stg-syscon
>> + - dr_mode
>> + - "#address-cells"
>> + - "#size-cells"
>> + - ranges
>> +
>> +patternProperties:
>> + "^usb@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + usbphy node should have '1' usb controller subnode.
>> + It could be Cadence USB3 DRD controller.
>> + Cadence USB3 should follow the bindings specified in
>> + Documentation/devicetree/bindings/usb/cdns,usb3.yaml
>
> Why is the controller a child of the phy?
>
same as [1]. I will change this .
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + usbphy at 10200000 {
>> + compatible = "starfive,jh7110-usb";
>> + reg = <0x10210000 0x1000>,
>> + <0x10200000 0x1000>;
>> + reg-names = "usb3", "usb2";
>> + clocks = <&syscrg 95>,
>> + <&stgcrg 6>,
>> + <&stgcrg 4>,
>> + <&stgcrg 5>,
>> + <&stgcrg 1>,
>> + <&stgcrg 3>,
>> + <&stgcrg 2>;
>> + clock-names = "usb_125m", "usb0_app_125", "usb0_lpm",
>> + "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb";
>> + resets = <&stgcrg 10>,
>> + <&stgcrg 8>,
>> + <&stgcrg 7>,
>> + <&stgcrg 9>;
>> + starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>;
>> + starfive,sys-syscon = <&sys_syscon 0x18>;
>> + dr_mode = "host";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + usb at 10100000 {
>> + compatible = "cdns,usb3";
>
> This needs a platform specific compatible.
>
same as [1]
>> + reg = <0x10100000 0x10000>,
>> + <0x10110000 0x10000>,
>> + <0x10120000 0x10000>;
>> + reg-names = "otg", "xhci", "dev";
>> + interrupts = <100>, <108>, <110>;
>> + interrupt-names = "host", "peripheral", "otg";
>> + phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy";
>> + maximum-speed = "super-speed";
>> + };
>> + };
>> --
>> 2.17.1
>>
More information about the linux-phy
mailing list