[PATCH v2 2/3] usb: cdns3: add StarFive JH7110 USB glue layer
Minda Chen
minda.chen at starfivetech.com
Wed Mar 8 00:27:59 PST 2023
There is a Cadence USB3 core for JH7110 SoCs, the cdns
core is the child for this glue layer device.
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
---
MAINTAINERS | 7 +
drivers/usb/cdns3/Kconfig | 11 +
drivers/usb/cdns3/Makefile | 1 +
drivers/usb/cdns3/cdns3-starfive.c | 374 +++++++++++++++++++++++++++++
4 files changed, 393 insertions(+)
create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 47a3dd16b59b..20a64fa39a14 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19970,6 +19970,13 @@ M: William Qiu <william.qiu at starfivetech.com>
S: Supported
F: Documentation/devicetree/bindings/soc/starfive/jh7110-syscon.yaml
+STARFIVE JH71X0 USB PHY DRIVERS
+M: Emil Renner Berthing <kernel at esmil.dk>
+M: Minda Chen <minda.chen at starfivetech.com>
+S: Maintained
+F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb*.yaml
+F: drivers/usb/cdns3/cdns3-starfive.c
+
STATIC BRANCH/CALL
M: Peter Zijlstra <peterz at infradead.org>
M: Josh Poimboeuf <jpoimboe at kernel.org>
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
index b98ca0a1352a..0a514b591527 100644
--- a/drivers/usb/cdns3/Kconfig
+++ b/drivers/usb/cdns3/Kconfig
@@ -78,6 +78,17 @@ config USB_CDNS3_IMX
For example, imx8qm and imx8qxp.
+config USB_CDNS3_STARFIVE
+ tristate "Cadence USB3 support on StarFive SoC platforms"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ help
+ Say 'Y' or 'M' here if you are building for StarFive SoCs
+ platforms that contain Cadence USB3 controller core.
+
+ e.g. JH7110.
+
+ If you choose to build this driver as module it will
+ be dynamically linked and module will be called cdns3-starfive.ko
endif
if USB_CDNS_SUPPORT
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 61edb2f89276..48dfae75b5aa 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -24,6 +24,7 @@ endif
obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o
+obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
cdnsp-udc-pci-y := cdnsp-pci.o
diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
new file mode 100644
index 000000000000..9b80be29ac0d
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-starfive.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2022 Starfive, Inc.
+ * Author: Yanhong Wang <yanhong.wang at starfivetech.com>
+ * Author: Mason Huo <mason.huo at starfivetech.com>
+ * Author: Minda Chen <minda.chen at starfivetech.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/usb/otg.h>
+#include "core.h"
+
+#define USB_STRAP_HOST BIT(17)
+#define USB_STRAP_DEVICE BIT(18)
+#define USB_STRAP_MASK GENMASK(18, 16)
+
+#define USB_SUSPENDM_HOST BIT(19)
+#define USB_SUSPENDM_DEVICE (0 << 19)
+#define USB_SUSPENDM_MASK BIT(19)
+
+#define USB_SUSPENDM_BYPS BIT(20)
+#define USB_REFCLK_MODE BIT(23)
+#define USB_PLL_EN BIT(22)
+#define USB_PDRSTN_SPLIT BIT(17)
+
+#define PCIE_CKREF_SRC_MASK GENMASK(19, 18)
+#define PCIE_CLK_SEL_MASK GENMASK(21, 20)
+#define PCIE_PHY_MODE BIT(20)
+#define PCIE_PHY_MODE_MASK GENMASK(21, 20)
+#define PCIE_USB3_BUS_WIDTH_MASK GENMASK(3, 2)
+#define PCIE_USB3_RATE_MASK GENMASK(6, 5)
+#define PCIE_USB3_RX_STANDBY_MASK BIT(7)
+#define PCIE_USB3_PHY_ENABLE BIT(4)
+#define PCIE_USB3_PHY_PLL_CTL_OFF (0x1f * 4)
+
+#define USB_125M_CLK_RATE 125000000
+
+#define USB_LS_KEEPALIVE_OFF 0x4
+#define USB_LS_KEEPALIVE_ENABLE BIT(4)
+
+#define USB3_DOWN_SS_MODE BIT(4)
+
+struct cdns_starfive {
+ struct device *dev;
+ struct regmap *stg_syscon;
+ struct regmap *sys_syscon;
+ struct reset_control *resets;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ struct clk *usb_125m_clk;
+ u32 sys_offset;
+ u32 stg_offset_4;
+ u32 stg_offset_196;
+ u32 stg_offset_328;
+ u32 stg_offset_500;
+ bool usb2_only;
+ enum usb_dr_mode mode;
+ void __iomem *phybase_20;
+ void __iomem *phybase_30;
+};
+
+static int cdns_mode_init(struct platform_device *pdev,
+ struct cdns_starfive *data)
+{
+ enum usb_dr_mode mode;
+
+ /* Init usb 2.0 utmi phy */
+ regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+ USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+ USB_PLL_EN, USB_PLL_EN);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+ USB_REFCLK_MODE, USB_REFCLK_MODE);
+
+ if (data->usb2_only) {
+ /* Disconnect usb 3.0 phy mode */
+ regmap_update_bits(data->sys_syscon, data->sys_offset,
+ USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
+ } else {
+ /* Config usb 3.0 pipe phy */
+ regmap_update_bits(data->stg_syscon, data->stg_offset_196,
+ PCIE_CKREF_SRC_MASK, 0);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_196,
+ PCIE_CLK_SEL_MASK, 0);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_328,
+ PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+ PCIE_USB3_BUS_WIDTH_MASK, 0);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+ PCIE_USB3_RATE_MASK, 0);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+ PCIE_USB3_RX_STANDBY_MASK, 0);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+ PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
+
+ /* Connect usb 3.0 phy mode */
+ regmap_update_bits(data->sys_syscon, data->sys_offset,
+ USB_PDRSTN_SPLIT, 0);
+ }
+ mode = usb_get_dr_mode(&pdev->dev);
+ data->mode = mode;
+
+ switch (mode) {
+ case USB_DR_MODE_HOST:
+ regmap_update_bits(data->stg_syscon,
+ data->stg_offset_4,
+ USB_STRAP_MASK,
+ USB_STRAP_HOST);
+ regmap_update_bits(data->stg_syscon,
+ data->stg_offset_4,
+ USB_SUSPENDM_MASK,
+ USB_SUSPENDM_HOST);
+ break;
+
+ case USB_DR_MODE_PERIPHERAL:
+ regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+ USB_STRAP_MASK, USB_STRAP_DEVICE);
+ regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+ USB_SUSPENDM_MASK, USB_SUSPENDM_DEVICE);
+ break;
+
+ case USB_DR_MODE_UNKNOWN:
+ case USB_DR_MODE_OTG:
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int cdns_clk_rst_init(struct cdns_starfive *data)
+{
+ int ret;
+
+ data->usb_125m_clk = devm_clk_get(data->dev, "usb_125m");
+ if (IS_ERR(data->usb_125m_clk))
+ return dev_err_probe(data->dev, PTR_ERR(data->usb_125m_clk),
+ "Failed to get 125m clock\n");
+
+ data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
+ if (data->num_clks < 0)
+ return dev_err_probe(data->dev, -ENODEV,
+ "Failed to get clocks\n");
+
+ /* Needs to set the USB_125M clock explicitly,
+ * since it's divided from pll0 clock, and the pll0 clock
+ * changes per the cpu frequency.
+ */
+ ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "Failed to set 125m clocks\n");
+
+ ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "failed to enable clocks\n");
+
+ data->resets = devm_reset_control_array_get_exclusive(data->dev);
+ if (IS_ERR(data->resets)) {
+ ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
+ "Failed to get resets");
+ goto err_clk_init;
+ }
+
+ ret = reset_control_deassert(data->resets);
+ if (ret) {
+ ret = dev_err_probe(data->dev, ret,
+ "failed to reset clocks\n");
+ goto err_clk_init;
+ }
+
+ return ret;
+
+err_clk_init:
+ clk_bulk_disable_unprepare(data->num_clks, data->clks);
+ return ret;
+}
+
+static void cdns_starfive_set_phy(struct cdns_starfive *data)
+{
+ unsigned int val;
+
+ if (data->mode != USB_DR_MODE_PERIPHERAL) {
+ /* Enable the LS speed keep-alive signal */
+ val = readl(data->phybase_20 + USB_LS_KEEPALIVE_OFF);
+ val |= USB_LS_KEEPALIVE_ENABLE;
+ writel(val, data->phybase_20 + USB_LS_KEEPALIVE_OFF);
+ }
+
+ /* Configuare spread-spectrum mode: down-spread-spectrum */
+ if (!data->usb2_only)
+ writel(USB3_DOWN_SS_MODE, data->phybase_30 + PCIE_USB3_PHY_PLL_CTL_OFF);
+}
+
+static int cdns_starfive_phy_init(struct platform_device *pdev,
+ struct cdns_starfive *data)
+{
+ struct device *dev = &pdev->dev;
+
+ data->phybase_20 = devm_platform_ioremap_resource_byname(pdev, "usb2");
+ if (IS_ERR(data->phybase_20))
+ return dev_err_probe(dev, PTR_ERR(data->phybase_20),
+ "Can't map phybase_20 IOMEM resource\n");
+
+ data->phybase_30 = devm_platform_ioremap_resource_byname(pdev, "usb3");
+ if (IS_ERR(data->phybase_30))
+ return dev_err_probe(dev, PTR_ERR(data->phybase_30),
+ "Can't map phybase_30 IOMEM resource\n");
+
+ cdns_starfive_set_phy(data);
+
+ return 0;
+}
+
+static int cdns_starfive_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = pdev->dev.of_node;
+ struct cdns_starfive *data;
+ unsigned int args[4];
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, data);
+
+ data->dev = dev;
+
+ data->usb2_only = device_property_read_bool(dev, "starfive,usb2-only");
+ data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
+ "starfive,stg-syscon", 4, args);
+
+ if (IS_ERR(data->stg_syscon))
+ return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
+ "Failed to parse starfive,stg-syscon\n");
+
+ data->stg_offset_4 = args[0];
+ data->stg_offset_196 = args[1];
+ data->stg_offset_328 = args[2];
+ data->stg_offset_500 = args[3];
+
+ data->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
+ "starfive,sys-syscon", 1, args);
+ if (IS_ERR(data->sys_syscon))
+ return dev_err_probe(dev, PTR_ERR(data->sys_syscon),
+ "Failed to parse starfive,sys-syscon\n");
+
+ data->sys_offset = args[0];
+
+ cdns_mode_init(pdev, data);
+
+ ret = cdns_clk_rst_init(data);
+ if (ret)
+ return ret;
+
+ ret = cdns_starfive_phy_init(pdev, data);
+ if (ret)
+ return ret;
+
+ ret = of_platform_populate(node, NULL, NULL, dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to create children\n");
+
+ device_set_wakeup_capable(dev, true);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ dev_info(dev, "usb mode %d %s probe success\n",
+ data->mode, data->usb2_only ? "2.0" : "3.0");
+
+ return 0;
+}
+
+static int cdns_starfive_remove_core(struct device *dev, void *c)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ platform_device_unregister(pdev);
+
+ return 0;
+}
+
+static int cdns_starfive_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cdns_starfive *data = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+ device_for_each_child(dev, NULL, cdns_starfive_remove_core);
+
+ reset_control_assert(data->resets);
+ clk_bulk_disable_unprepare(data->num_clks, data->clks);
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cdns_starfive_resume(struct device *dev)
+{
+ struct cdns_starfive *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(data->resets);
+ if (ret)
+ return ret;
+
+ cdns_starfive_set_phy(data);
+
+ return 0;
+}
+
+static int cdns_starfive_suspend(struct device *dev)
+{
+ struct cdns_starfive *data = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(data->num_clks, data->clks);
+ reset_control_assert(data->resets);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops cdns_starfive_pm_ops = {
+ SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
+};
+
+static const struct of_device_id cdns_starfive_of_match[] = {
+ { .compatible = "starfive,jh7110-usb", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
+
+static struct platform_driver cdns_starfive_driver = {
+ .probe = cdns_starfive_probe,
+ .remove = cdns_starfive_remove,
+ .driver = {
+ .name = "cdns3-starfive",
+ .of_match_table = cdns_starfive_of_match,
+ .pm = &cdns_starfive_pm_ops,
+ },
+};
+module_platform_driver(cdns_starfive_driver);
+
+MODULE_ALIAS("platform:cdns3-starfive");
+MODULE_AUTHOR("YanHong Wang <yanhong.wang at starfivetech.com>");
+MODULE_AUTHOR("Mason Huo <mason.huo at starfivetech.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
--
2.17.1
More information about the linux-phy
mailing list