[PATCH v10 03/13] dt-bindings: Convert gpio-mmio to yaml

[Sean Anderson]

Hi Krzysztof,

On 3/7/23 03:42, Krzysztof Kozlowski wrote:
> On 06/03/2023 20:15, Sean Anderson wrote:
>> This is a generic binding for simple MMIO GPIO controllers. Although we
>> have a single driver for these controllers, they were previously spread
>> over several files. Consolidate them. The register descriptions are
>> adapted from the comments in the source. There is no set order for the
>> registers, so I have not specified one.
>> 
>> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
>> ---
>> 
>> Changes in v10:
>> - New
>> 
>>  .../bindings/gpio/brcm,bcm6345-gpio.yaml      |  16 +--
>>  .../devicetree/bindings/gpio/gpio-mmio.yaml   | 136 ++++++++++++++++++
>>  .../bindings/gpio/ni,169445-nand-gpio.txt     |  38 -----
>>  .../devicetree/bindings/gpio/wd,mbl-gpio.txt  |  38 -----
>>  4 files changed, 137 insertions(+), 91 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
>>  delete mode 100644 Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
>>  delete mode 100644 Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
> 
> https://lore.kernel.org/all/20230126-gpio-mmio-fix-v2-1-38397aace340@ncr.com/

Thanks for linking to that.

I believe this patch should be applied instead of that one because

- It documents all the registers, which were previously only documented
  in the driver
- It handles the endianness properties.
- It consolidates the various descriptions of this binding into one
  schema.

--Sean