[PATCH 1/3] dt-bindings: phy: Add StarFive JH7110 USB dt-binding

[Minda Chen]

On 2023/3/6 20:25, Rob Herring wrote:
> 
> On Mon, 06 Mar 2023 17:52:57 +0800, Minda Chen wrote:
>> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
>> USB controller is cadence USB 3.0 IP.
>> 
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> ---
>>  .../bindings/phy/starfive,jh7110-usb-phy.yaml | 116 ++++++++++++++++++
>>  1 file changed, 116 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>> 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:30:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:40:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: [error] syntax error: mapping values are not allowed here (syntax)
> 
> dtschema/dtc warnings/errors:
> make[1]: *** Deleting file 'Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts'
> Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
> make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts] Error 1
> make[1]: *** Waiting for unfinished jobs....
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml: ignoring, error parsing file
> make: *** [Makefile:1512: dt_binding_check] Error 2
> 
> doc reference errors (make refcheckdocs):
> 
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230306095257.25957-1-minda.chen@starfivetech.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 
Thanks! I will fix this issue in patch v2.