Re: [PATCH 1/7] dt-bindings: PCI: qcom: Add IPQ9574 specific compatible
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Mar 3 07:16:58 PST 2023
28 февраля 2023 г. 08:33:58 GMT+02:00, Manivannan Sadhasivam <mani at kernel.org> пишет:
>On Tue, Feb 28, 2023 at 10:56:53AM +0530, Devi Priya wrote:
>>
>>
>> On 2/24/2023 1:53 PM, Manivannan Sadhasivam wrote:
>> > On Tue, Feb 14, 2023 at 10:11:29PM +0530, Devi Priya wrote:
>> > > Document the compatible for IPQ9574
>> > >
>> Hi Mani, Thanks for taking time to review the patch.
>> >
>> > You didn't mention about the "msi-parent" property that is being added
>> > by this patch
>> Sure, will update the commit message in the next spin
>> >
>> > > Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>> > > ---
>> > > .../devicetree/bindings/pci/qcom,pcie.yaml | 72 ++++++++++++++++++-
>> > > 1 file changed, 70 insertions(+), 2 deletions(-)
>> > >
>> > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>> > > index 872817d6d2bd..dabdf2684e2d 100644
>> > > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>> > > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>> > > @@ -26,6 +26,7 @@ properties:
>> > > - qcom,pcie-ipq8064-v2
>> > > - qcom,pcie-ipq8074
>> > > - qcom,pcie-ipq8074-gen3
>> > > + - qcom,pcie-ipq9574
>> > > - qcom,pcie-msm8996
>> > > - qcom,pcie-qcs404
>> > > - qcom,pcie-sa8540p
>> > > @@ -44,11 +45,11 @@ properties:
>> > > reg:
>> > > minItems: 4
>> > > - maxItems: 5
>> > > + maxItems: 6
>> > > reg-names:
>> > > minItems: 4
>> > > - maxItems: 5
>> > > + maxItems: 6
>> > > interrupts:
>> > > minItems: 1
>> > > @@ -105,6 +106,8 @@ properties:
>> > > items:
>> > > - const: pciephy
>> > > + msi-parent: true
>> > > +
>> > > power-domains:
>> > > maxItems: 1
>> > > @@ -173,6 +176,27 @@ allOf:
>> > > - const: parf # Qualcomm specific registers
>> > > - const: config # PCIe configuration space
>> > > + - if:
>> > > + properties:
>> > > + compatible:
>> > > + contains:
>> > > + enum:
>> > > + - qcom,pcie-ipq9574
>> > > + then:
>> > > + properties:
>> > > + reg:
>> > > + minItems: 5
>> > > + maxItems: 6
>> > > + reg-names:
>> > > + minItems: 5
>> > > + items:
>> > > + - const: dbi # DesignWare PCIe registers
>> > > + - const: elbi # External local bus interface registers
>> > > + - const: atu # ATU address space
>> > > + - const: parf # Qualcomm specific registers
>> > > + - const: config # PCIe configuration space
>> > > + - const: aggr_noc #PCIe aggr_noc
>> >
>> > Why do you need this region unlike other SoCs? Is the driver making use of it?
>> We have the aggr_noc region in ipq9574 to achieve higher throughput & to
>> handle multiple PCIe instances. The driver uses it to rate adapt 1-lane PCIe
>> clocks. My bad, missed it. Will add the driver changes in V2.
>
>Hmm, this is something new. How can you achieve higher throughput with this
>region? Can you explain more on how it is used?
Based on the name of the region, it looks like it is an interconnect region.
Devi, if this is the case, then you have to handle it through the interconnect driver, rather than poking directly into these registers.
>
>Thanks,
>Mani
>
>> >
>> > Thanks,
>> > Mani
>> >
>> > > +
>> > > - if:
>> > > properties:
>> > > compatible:
>> > > @@ -365,6 +389,39 @@ allOf:
>> > > - const: ahb # AHB Reset
>> > > - const: axi_m_sticky # AXI Master Sticky reset
>> > > + - if:
>> > > + properties:
>> > > + compatible:
>> > > + contains:
>> > > + enum:
>> > > + - qcom,pcie-ipq9574
>> > > + then:
>> > > + properties:
>> > > + clocks:
>> > > + minItems: 6
>> > > + maxItems: 6
>> > > + clock-names:
>> > > + items:
>> > > + - const: ahb # AHB clock
>> > > + - const: aux # Auxiliary clock
>> > > + - const: axi_m # AXI Master clock
>> > > + - const: axi_s # AXI Slave clock
>> > > + - const: axi_bridge # AXI bridge clock
>> > > + - const: rchng
>> > > + resets:
>> > > + minItems: 8
>> > > + maxItems: 8
>> > > + reset-names:
>> > > + items:
>> > > + - const: pipe # PIPE reset
>> > > + - const: sticky # Core Sticky reset
>> > > + - const: axi_s_sticky # AXI Slave Sticky reset
>> > > + - const: axi_s # AXI Slave reset
>> > > + - const: axi_m_sticky # AXI Master Sticky reset
>> > > + - const: axi_m # AXI Master reset
>> > > + - const: aux # AUX Reset
>> > > + - const: ahb # AHB Reset
>> > > +
>> > > - if:
>> > > properties:
>> > > compatible:
>> > > @@ -681,6 +738,16 @@ allOf:
>> > > - interconnects
>> > > - interconnect-names
>> > > + - if:
>> > > + properties:
>> > > + compatible:
>> > > + contains:
>> > > + enum:
>> > > + - qcom,pcie-ipq9574
>> > > + then:
>> > > + required:
>> > > + - msi-parent
>> > > +
>> > > - if:
>> > > not:
>> > > properties:
>> > > @@ -693,6 +760,7 @@ allOf:
>> > > - qcom,pcie-ipq8064v2
>> > > - qcom,pcie-ipq8074
>> > > - qcom,pcie-ipq8074-gen3
>> > > + - qcom,pcie-ipq9574
>> > > - qcom,pcie-qcs404
>> > > then:
>> > > required:
>> > > --
>> > > 2.17.1
>> > >
>> >
>> Thanks,
>> Devi Priya
>
More information about the linux-phy
mailing list