[PATCH v4 4/6] arm64: dts: qcom: ipq5332: Add USB related nodes

[Konrad Dybcio]

On 12.07.2023 13:38, Varadarajan Narayanan wrote:
> Add USB phy and controller nodes.
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> v4:
> 	Change node name
> 	Remove blank line
> 	'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
DT_SCHEMA_FILES accepts yaml files

Konrad
> v1:
> 	Rename phy node
> 	Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
> 	Remove 'qscratch' from phy node
> 	Fix alignment and upper-case hex no.s
> 	Add clock definition for the phy
> 	Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
> 	in dwc3/core.c takes the frequency from ref clock and calculates fladj
> 	as appropriate.
> ---
>  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 53 +++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 8bfc2db..8118356 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -405,6 +405,59 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		usbphy0: usb-phy at 7b000 {
> +			compatible = "qcom,ipq5332-usb-hsphy";
> +			reg = <0x0007b000 0x12c>;
> +
> +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +			clock-names = "cfg_ahb";
> +
> +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> +			status = "disabled";
> +		};
> +
> +		usb2: usb2 at 8a00000 {
> +			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
> +			reg = <0x08af8800 0x400>;
> +
> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hs_phy_irq";
> +
> +			clocks = <&gcc GCC_USB0_MASTER_CLK>,
> +				 <&gcc GCC_SNOC_USB_CLK>,
> +				 <&gcc GCC_USB0_SLEEP_CLK>,
> +				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +			clock-names = "core",
> +				      "iface",
> +				      "sleep",
> +				      "mock_utmi";
> +
> +			resets = <&gcc GCC_USB_BCR>;
> +
> +			qcom,select-utmi-as-pipe-clk;
> +
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			status = "disabled";
> +
> +			usb2_0_dwc: usb at 8a00000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x08a00000 0xe000>;
> +				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +				clock-names = "ref";
> +				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> +				usb-phy = <&usbphy0>;
> +				tx-fifo-resize;
> +				snps,is-utmi-l1-suspend;
> +				snps,hird-threshold = /bits/ 8 <0x0>;
> +				snps,dis_u2_susphy_quirk;
> +				snps,dis_u3_susphy_quirk;
> +			};
> +		};
>  	};
>  
>  	timer {