[PATCH v4 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Jul 11 07:51:47 PDT 2023
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 7cb9ee2765f7..30a63f4b19c4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2575,7 +2575,7 @@ ufs_mem_hc: ufshc at 1d84000 {
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2621,10 +2621,8 @@ ufs_mem_hc: ufshc at 1d84000 {
ufs_mem_phy: phy at 1d87000 {
compatible = "qcom,sdm845-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x18c>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2632,16 +2630,9 @@ ufs_mem_phy: phy at 1d87000 {
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy at 1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+ status = "disabled";
};
cryptobam: dma-controller at 1dc4000 {
--
2.39.2
More information about the linux-phy
mailing list