[EXT] Re: [PATCH v6 4/8] phy: Add HDMI configuration options

[Sandor Yu]

Hi Vinod,

Thanks for your comments,

> -----Original Message-----
> From: Vinod Koul <vkoul at kernel.org>
> Sent: 2023年6月21日 19:22
> To: Sandor Yu <sandor.yu at nxp.com>
> Cc: andrzej.hajda at intel.com; neil.armstrong at linaro.org;
> robert.foss at linaro.org; Laurent.pinchart at ideasonboard.com;
> jonas at kwiboo.se; jernej.skrabec at gmail.com; airlied at gmail.com;
> daniel at ffwll.ch; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org;
> shawnguo at kernel.org; s.hauer at pengutronix.de; festevam at gmail.com;
> dri-devel at lists.freedesktop.org; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> linux-phy at lists.infradead.org; kernel at pengutronix.de; dl-linux-imx
> <linux-imx at nxp.com>; Oliver Brown <oliver.brown at nxp.com>
> Subject: [EXT] Re: [PATCH v6 4/8] phy: Add HDMI configuration options
> 
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
> 
> 
> On 15-06-23, 09:38, Sandor Yu wrote:
> > Allow HDMI PHYs to be configured through the generic functions through
> > a custom structure added to the generic union.
> >
> > The parameters added here are based on HDMI PHY implementation
> > practices.  The current set of parameters should cover the potential
> > users.
> >
> > Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> > ---
> >  include/linux/phy/phy-hdmi.h | 38
> ++++++++++++++++++++++++++++++++++++
> >  include/linux/phy/phy.h      |  7 ++++++-
> >  2 files changed, 44 insertions(+), 1 deletion(-)  create mode 100644
> > include/linux/phy/phy-hdmi.h
> >
> > diff --git a/include/linux/phy/phy-hdmi.h
> > b/include/linux/phy/phy-hdmi.h new file mode 100644 index
> > 000000000000..5765aa5bc175
> > --- /dev/null
> > +++ b/include/linux/phy/phy-hdmi.h
> > @@ -0,0 +1,38 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright 2022 NXP
> > + */
> > +
> > +#ifndef __PHY_HDMI_H_
> > +#define __PHY_HDMI_H_
> > +
> > +/**
> > + * Pixel Encoding as HDMI Specification
> > + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> > + * YUV420: HDMI Specification 2.a Section 7.1  */ enum
> > +hdmi_phy_colorspace {
> > +     HDMI_PHY_COLORSPACE_RGB,        /* RGB 4:4:4 */
> > +     HDMI_PHY_COLORSPACE_YUV422,     /* YCbCr 4:2:2 */
> > +     HDMI_PHY_COLORSPACE_YUV444,     /* YCbCr 4:4:4 */
> > +     HDMI_PHY_COLORSPACE_YUV420,     /* YCbCr 4:2:0 */
> 
> Better add this comments and above one as expected by kernel-doc for
> enum..
OK, I will add it and it will replace by enum hdmi_colorspace in <linux/hdmi.h> in the next version.

> 
> > +     HDMI_PHY_COLORSPACE_RESERVED4,
> > +     HDMI_PHY_COLORSPACE_RESERVED5,
> > +     HDMI_PHY_COLORSPACE_RESERVED6,
> > +};
> > +
> > +/**
> > + * struct phy_configure_opts_hdmi - HDMI configuration set
> > + * @pixel_clk_rate:  Pixel clock of video modes in KHz.
> > + * @bpc: Maximum bits per color channel.
> > + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> > + *
> > + * This structure is used to represent the configuration state of a HDMI phy.
> > + */
> > +struct phy_configure_opts_hdmi {
> > +     unsigned int pixel_clk_rate;
> > +     unsigned int bpc;
> > +     enum hdmi_phy_colorspace color_space; };
> > +
> > +#endif /* __PHY_HDMI_H_ */
> > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index
> > 3a570bc59fc7..93d77d45b1d4 100644
> > --- a/include/linux/phy/phy.h
> > +++ b/include/linux/phy/phy.h
> > @@ -17,6 +17,7 @@
> >  #include <linux/regulator/consumer.h>
> >
> >  #include <linux/phy/phy-dp.h>
> > +#include <linux/phy/phy-hdmi.h>
> >  #include <linux/phy/phy-lvds.h>
> >  #include <linux/phy/phy-mipi-dphy.h>
> >
> > @@ -42,7 +43,8 @@ enum phy_mode {
> >       PHY_MODE_MIPI_DPHY,
> >       PHY_MODE_SATA,
> >       PHY_MODE_LVDS,
> > -     PHY_MODE_DP
> > +     PHY_MODE_DP,
> > +     PHY_MODE_HDMI,
> >  };
> >
> >  enum phy_media {
> > @@ -60,11 +62,14 @@ enum phy_media {
> >   *           the DisplayPort protocol.
> >   * @lvds:    Configuration set applicable for phys supporting
> >   *           the LVDS phy mode.
> > + * @hdmi:    Configuration set applicable for phys supporting
> > + *           the HDMI phy mode.
> >   */
> >  union phy_configure_opts {
> >       struct phy_configure_opts_mipi_dphy     mipi_dphy;
> >       struct phy_configure_opts_dp            dp;
> >       struct phy_configure_opts_lvds          lvds;
> > +     struct phy_configure_opts_hdmi          hdmi;
> >  };
> >
> >  /**
> > --
> > 2.34.1
> 
> --
> ~Vinod

B.R
Sandor