[PATCH 06/10] bus: rifsc: introduce RIFSC firewall controller driver
Gatien Chevallier
gatien.chevallier at foss.st.com
Wed Jul 5 10:27:55 PDT 2023
RIFSC is a peripheral firewall controller that filter accesses based on
Arm TrustZone secure state, Arm CPU privilege execution level and
Compartment IDentification of the STM32 SoC subsystems.
Signed-off-by: Gatien Chevallier <gatien.chevallier at foss.st.com>
---
MAINTAINERS | 1 +
drivers/bus/Makefile | 2 +-
drivers/bus/stm32_rifsc.c | 248 ++++++++++++++++++++++++++++++++++++++
3 files changed, 250 insertions(+), 1 deletion(-)
create mode 100644 drivers/bus/stm32_rifsc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index fabf95ba9b86..1ea2f9f60b43 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20127,6 +20127,7 @@ ST STM32 FIREWALL
M: Gatien Chevallier <gatien.chevallier at foss.st.com>
S: Maintained
F: drivers/bus/stm32_firewall.c
+F: drivers/bus/stm32_rifsc.c
ST STM32 I2C/SMBUS DRIVER
M: Pierre-Yves MORDRET <pierre-yves.mordret at foss.st.com>
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index fc0511450ec2..e50d18e1d141 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o
obj-$(CONFIG_QCOM_SSC_BLOCK_BUS) += qcom-ssc-block-bus.o
-obj-$(CONFIG_STM32_FIREWALL) += stm32_firewall.o
+obj-$(CONFIG_STM32_FIREWALL) += stm32_firewall.o stm32_rifsc.o
obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_OF) += simple-pm-bus.o
diff --git a/drivers/bus/stm32_rifsc.c b/drivers/bus/stm32_rifsc.c
new file mode 100644
index 000000000000..f591fd3d4392
--- /dev/null
+++ b/drivers/bus/stm32_rifsc.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include "stm32_firewall.h"
+
+/*
+ * RIFSC offset register
+ */
+#define RIFSC_RISC_SECCFGR0 0x10
+#define RIFSC_RISC_PRIVCFGR0 0x30
+#define RIFSC_RISC_PER0_CIDCFGR 0x100
+#define RIFSC_RISC_PER0_SEMCR 0x104
+#define RIFSC_RISC_HWCFGR2 0xFEC
+
+/*
+ * SEMCR register
+ */
+#define SEMCR_MUTEX BIT(0)
+
+/*
+ * HWCFGR2 register
+ */
+#define HWCFGR2_CONF1_MASK GENMASK(15, 0)
+#define HWCFGR2_CONF2_MASK GENMASK(23, 16)
+#define HWCFGR2_CONF3_MASK GENMASK(31, 24)
+
+/*
+ * RIFSC miscellaneous
+ */
+#define RIFSC_RISC_CFEN_MASK BIT(0)
+#define RIFSC_RISC_SEM_EN_MASK BIT(1)
+#define RIFSC_RISC_SCID_MASK GENMASK(6, 4)
+#define RIFSC_RISC_SEML_SHIFT 16
+#define RIFSC_RISC_SEMWL_MASK GENMASK(23, 16)
+#define RIFSC_RISC_PER_ID_MASK GENMASK(31, 24)
+
+#define RIFSC_RISC_PERx_CID_MASK (RIFSC_RISC_CFEN_MASK | \
+ RIFSC_RISC_SEM_EN_MASK | \
+ RIFSC_RISC_SCID_MASK | \
+ RIFSC_RISC_SEMWL_MASK)
+
+#define IDS_PER_RISC_SEC_PRIV_REGS 32
+
+/* RIF miscellaneous */
+/*
+ * CIDCFGR register fields
+ */
+#define CIDCFGR_CFEN BIT(0)
+#define CIDCFGR_SEMEN BIT(1)
+#define CIDCFGR_SEMWL(x) BIT(RIFSC_RISC_SEML_SHIFT + (x))
+
+#define SEMWL_SHIFT 16
+
+/* Compartiment IDs */
+#define RIF_CID0 0x0
+#define RIF_CID1 0x1
+
+static bool stm32_rifsc_is_semaphore_available(void __iomem *addr)
+{
+ return !(readl(addr) & SEMCR_MUTEX);
+}
+
+static int stm32_rif_acquire_semaphore(struct stm32_firewall_controller *stm32_firewall_controller,
+ int id)
+{
+ void __iomem *addr = stm32_firewall_controller->mmio + RIFSC_RISC_PER0_SEMCR + 0x8 * id;
+
+ __set_bit(SEMCR_MUTEX, addr);
+
+ /* Check that CID1 has the semaphore */
+ if (stm32_rifsc_is_semaphore_available(addr) ||
+ FIELD_GET(RIFSC_RISC_SCID_MASK, readl(addr)) != RIF_CID1)
+ return -EACCES;
+
+ return 0;
+}
+
+static void stm32_rif_release_semaphore(struct stm32_firewall_controller *stm32_firewall_controller,
+ int id)
+{
+ void __iomem *addr = stm32_firewall_controller->mmio + RIFSC_RISC_PER0_SEMCR + 0x8 * id;
+
+ if (stm32_rifsc_is_semaphore_available(addr))
+ return;
+
+ writel(SEMCR_MUTEX, addr);
+
+ /* Ok if another compartment takes the semaphore before the check */
+ WARN_ON(!stm32_rifsc_is_semaphore_available(addr) &&
+ FIELD_GET(RIFSC_RISC_SCID_MASK, readl(addr)) == RIF_CID1);
+}
+
+static int stm32_rifsc_grant_access(struct stm32_firewall_controller *ctrl, u32 firewall_id)
+{
+ struct stm32_firewall_controller *rifsc_controller = ctrl;
+ u32 reg_offset, reg_id, sec_reg_value, cid_reg_value;
+ int rc;
+
+ if (firewall_id >= rifsc_controller->max_entries) {
+ dev_err(rifsc_controller->dev, "Invalid sys bus ID %u", firewall_id);
+ return -EINVAL;
+ }
+
+ /*
+ * RIFSC_RISC_PRIVCFGRx and RIFSC_RISC_SECCFGRx both handle configuration access for
+ * 32 peripherals. On the other hand, there is one _RIFSC_RISC_PERx_CIDCFGR register
+ * per peripheral
+ */
+ reg_id = firewall_id / IDS_PER_RISC_SEC_PRIV_REGS;
+ reg_offset = firewall_id % IDS_PER_RISC_SEC_PRIV_REGS;
+ sec_reg_value = readl(rifsc_controller->mmio + RIFSC_RISC_SECCFGR0 + 0x4 * reg_id);
+ cid_reg_value = readl(rifsc_controller->mmio + RIFSC_RISC_PER0_CIDCFGR + 0x8 * firewall_id);
+
+ /* First check conditions for semaphore mode, which doesn't take into account static CID. */
+ if ((cid_reg_value & CIDCFGR_SEMEN) && (cid_reg_value & CIDCFGR_CFEN)) {
+ if (cid_reg_value & BIT(RIF_CID1 + SEMWL_SHIFT)) {
+ /* Static CID is irrelevant if semaphore mode */
+ goto skip_cid_check;
+ } else {
+ dev_dbg(rifsc_controller->dev,
+ "Invalid bus semaphore configuration: index %d\n", firewall_id);
+ return -EACCES;
+ }
+ }
+
+ /*
+ * Skip CID check if CID filtering isn't enabled or filtering is enabled on CID0, which
+ * corresponds to whatever CID.
+ */
+ if (!(cid_reg_value & CIDCFGR_CFEN) ||
+ FIELD_GET(RIFSC_RISC_SCID_MASK, cid_reg_value) == RIF_CID0)
+ goto skip_cid_check;
+
+ /* Coherency check with the CID configuration */
+ if (FIELD_GET(RIFSC_RISC_SCID_MASK, cid_reg_value) != RIF_CID1) {
+ dev_dbg(rifsc_controller->dev, "Invalid CID configuration for peripheral: %d\n",
+ firewall_id);
+ return -EACCES;
+ }
+
+skip_cid_check:
+ /* Check security configuration */
+ if (sec_reg_value & BIT(reg_offset)) {
+ dev_dbg(rifsc_controller->dev,
+ "Invalid security configuration for peripheral: %d\n", firewall_id);
+ return -EACCES;
+ }
+
+ /*
+ * If the peripheral is in semaphore mode, take the semaphore so that
+ * the CID1 has the ownership.
+ */
+ if ((cid_reg_value & CIDCFGR_SEMEN) && (cid_reg_value & CIDCFGR_CFEN)) {
+ rc = stm32_rif_acquire_semaphore(rifsc_controller, firewall_id);
+ if (rc) {
+ dev_err(rifsc_controller->dev,
+ "Couldn't acquire semaphore for peripheral: %d\n", firewall_id);
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static void stm32_rifsc_release_access(struct stm32_firewall_controller *ctrl, u32 firewall_id)
+{
+ stm32_rif_release_semaphore(ctrl, firewall_id);
+}
+
+static int stm32_rifsc_probe(struct platform_device *pdev)
+{
+ struct stm32_firewall_controller *rifsc_controller;
+ struct device_node *np = pdev->dev.of_node;
+ u32 nb_risup, nb_rimu, nb_risal;
+ struct resource *res;
+ void __iomem *mmio;
+ int rc;
+
+ rifsc_controller = devm_kzalloc(&pdev->dev, sizeof(*rifsc_controller), GFP_KERNEL);
+ if (!rifsc_controller)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mmio = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mmio))
+ return PTR_ERR(mmio);
+
+ rifsc_controller->dev = &pdev->dev;
+ rifsc_controller->mmio = mmio;
+ rifsc_controller->type = STM32_PERIPHERAL_FIREWALL | STM32_MEMORY_FIREWALL;
+ rifsc_controller->grant_access = stm32_rifsc_grant_access;
+ rifsc_controller->release_access = stm32_rifsc_release_access;
+
+ /* Get number of RIFSC entries*/
+ nb_risup = readl(rifsc_controller->mmio + RIFSC_RISC_HWCFGR2) & HWCFGR2_CONF1_MASK;
+ nb_rimu = readl(rifsc_controller->mmio + RIFSC_RISC_HWCFGR2) & HWCFGR2_CONF2_MASK;
+ nb_risal = readl(rifsc_controller->mmio + RIFSC_RISC_HWCFGR2) & HWCFGR2_CONF3_MASK;
+ rifsc_controller->max_entries = nb_risup + nb_rimu + nb_risal;
+
+ platform_set_drvdata(pdev, rifsc_controller);
+
+ rc = stm32_firewall_controller_register(rifsc_controller);
+ if (rc) {
+ dev_err(rifsc_controller->dev, "Couldn't register as a firewall controller: %d",
+ rc);
+ return rc;
+ }
+
+ stm32_firewall_populate_bus(rifsc_controller);
+
+ /* Populate all allowed nodes */
+ return of_platform_populate(np, NULL, NULL, &pdev->dev);
+}
+
+static const struct of_device_id stm32_rifsc_of_match[] = {
+ { .compatible = "st,stm32mp25-rifsc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, stm32_rifsc_of_match);
+
+static struct platform_driver stm32_rifsc_driver = {
+ .probe = stm32_rifsc_probe,
+ .driver = {
+ .name = "stm32-rifsc",
+ .of_match_table = stm32_rifsc_of_match,
+ },
+};
+
+static int __init stm32_rifsc_init(void)
+{
+ return platform_driver_register(&stm32_rifsc_driver);
+}
+arch_initcall(stm32_rifsc_init);
--
2.25.1
More information about the linux-phy
mailing list