[PATCH v9 07/10] arm64: dts: ls1046ardb: Add serdes bindings

[Krzysztof Kozlowski]

On 27/01/2023 17:42, Sean Anderson wrote:
> On 1/27/23 11:41, Krzysztof Kozlowski wrote:
>> On 27/01/2023 17:22, Sean Anderson wrote:
>>> On 1/27/23 11:15, Krzysztof Kozlowski wrote:
>>>> On 27/01/2023 17:11, Sean Anderson wrote:
>>>>>>>>>
>>>>>>>>>  .../boot/dts/freescale/fsl-ls1046a-rdb.dts    | 112 ++++++++++++++++++
>>>>>>>>>  drivers/phy/freescale/Kconfig                 |   1 +
>>>>>>>>
>>>>>>>> The phy driver Kconfig change shouldn't be part of this patch.
>>>>>>>
>>>>>>> I put it here for bisectability, since this is the point where we need
>>>>>>> to enable it. But I can do this in a separate patch if you want.
>>>>>>
>>>>>> From DT ABI perspective, it's already broken anyway if you need to change
>>>>>> kernel and DT atomically.
>>>>>
>>>>> AIUI new kernels must work with old device trees, but new device trees need not
>>>>> work with old kernels. So a change like this is fine, since the kernel won't
>>>>> touch the serdes if it isn't supplied.
>>>>
>>>> You used the argument "bisectability". If the patchset is not
>>>> bisectable, the ABI is broken.
>>>
>>> Well, because Shawn wants it in a separate patch I am just going to enable
>>> the driver by default on Layerscape before adding the device nodes. That way we have
>>>
>>> 1. Base state, driver not enabled and node is disabled
>>> 2. Driver enabled but not used because the node is disabled
>>> 3. Driver enabled and bound to node
>>>
>>> So there is never a case where the node is bound but the driver isn't enabled
>>> (which would cause the ethernet drivers to fail to probe).
>>
>> Then there is no bisectability issues and the Kconfig patch should have

"should have not been squashed", of course...

>> been squashed here... Mentioning bisectability and that squash just
>> confuses.
> 
> The Kconfig is currently squashed, but I am going to split it off as requested.

Yes, thanks.


Best regards,
Krzysztof