[RFC v2 0/7] sm8550: Add support for eUSB2 repeater

[Abel Vesa]

This patchset adds support for the eUSB2 repeater found in pmic PM8550B,
used along with SM8550. Since there is no dedicated generic framework
for eUSB2 repeaters, the most appropriate subsystem to model it is the
generic phy. This patchset also adds support for such repeater to the
eUSB2 PHY found in SM8550. Basically, the eUSB2 PHY will have its own
"phy" which is actually a repeater.

This patchset is based on the following patchset:
https://lore.kernel.org/all/?q=20230126131415.1453741-1-abel.vesa%40linaro.org

Changes since v1:
 * the repeater driver is implemented now as a PHY rather than adding
   a new generic framework for USB repeaters

Abel Vesa (5):
  dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
  dt-bindings: phy: qcom,snps-eusb2-repeater: Add phy related properties
  dt-bindings: mfd: qcom,spmi-pmic: Add pattern property for phy
  phy: qcom: Add QCOM SNPS eUSB2 repeater driver
  arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node

Neil Armstrong (2):
  phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
  arm64: dts: qcom: pm8550b: Add eUSB2 repeater node

 .../bindings/mfd/qcom,spmi-pmic.yaml          |   4 +
 .../bindings/phy/qcom,snps-eusb2-phy.yaml     |   9 +
 .../phy/qcom,snps-eusb2-repeater.yaml         |  48 +++
 arch/arm64/boot/dts/qcom/pm8550b.dtsi         |   6 +
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts       |   8 +
 drivers/phy/qualcomm/Kconfig                  |   9 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-eusb2-repeater.c    | 278 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-snps-eusb2.c    |  17 +-
 9 files changed, 379 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c

-- 
2.34.1