[PATCH v2 4/8] phy: qcom-qmp: pcs-usb: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB.
Add the new PCS USB specific offsets in a dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---

The v1 version of this patch was here:
https://lore.kernel.org/all/20221116120157.2706810-2-abel.vesa@linaro.org/

Changes since v1:
 * split all the offsets into separate patches, like Vinod suggested

 drivers/phy/qualcomm/phy-qcom-qmp-combo.c     |  1 +
 .../phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h    | 31 +++++++++++++++++++
 2 files changed, 32 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 521ea3ce6b83..14d12d198d87 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -26,6 +26,7 @@
 #include "phy-qcom-qmp-pcs-misc-v3.h"
 #include "phy-qcom-qmp-pcs-usb-v4.h"
 #include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v6.h"
 
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
new file mode 100644
index 000000000000..9510e63ba9d8
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_USB_V6_H_
+#define QCOM_PHY_QMP_PCS_USB_V6_H_
+
+/* Only for QMP V6 PHY - USB3 have different offsets than V5 */
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1		0xc4
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2		0xc8
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3		0xcc
+#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6		0xd8
+#define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1		0xdc
+#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1	0x90
+#define QPHY_USB_V6_PCS_RX_SIGDET_LVL			0x188
+#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L		0x190
+#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H		0x194
+#define QPHY_USB_V6_PCS_CDR_RESET_TIME			0x1b0
+#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1		0x1c0
+#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2		0x1c4
+#define QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG		0x1d0
+#define QPHY_USB_V6_PCS_EQ_CONFIG1			0x1dc
+#define QPHY_USB_V6_PCS_EQ_CONFIG5			0x1ec
+
+#define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x18
+#define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x3c
+#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x40
+#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x44
+
+#endif
-- 
2.34.1