[PATCH v5 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets

[Abel Vesa]

The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---

This patchset relies on the following patchset:
https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@linaro.org/

The v4 of this patch is:
https://lore.kernel.org/all/20230119140453.3942340-8-abel.vesa@linaro.org/

Changes since v4:
 * none

Changes since v3:
 * none

Changes since v2:
 * none

Changes since v1:
 * split all the offsets into separate patches, like Vinod suggested


 .../phy-qcom-qmp-qserdes-ln-shrd-v6.h         | 32 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
 2 files changed, 33 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
new file mode 100644
index 000000000000..86d7d796d5d7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
+
+#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL			0xa0
+#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES			0xb0
+#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1			0xb4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1		0xc4
+#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2		0xc8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0			0xd4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1			0xd8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2			0xdc
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3			0xe0
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4			0xe4
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5			0xe8
+#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6			0xec
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210	0xf0
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3		0xf4
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210	0xf8
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3		0xfc
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210	0x100
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3		0x104
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3		0x10c
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3		0x114
+#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3		0x11c
+#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE		0x128
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e5974e6caf51..148663ee713a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -24,6 +24,7 @@
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"
 
-- 
2.34.1