[PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350

[Johan Hovold]

On Mon, Jan 23, 2023 at 12:22:32PM +0100, Luca Weiss wrote:
> On Mon Jan 23, 2023 at 12:15 PM CET, Dmitry Baryshkov wrote:

> > There are two SERDES regions. One used by USB part of the PHY (at 
> > 0x1000) and another SERDES region used for DP (at 0x2000). As Johan 
> > described below, vendor kernel handles the DP regions in the DP driver. 
> > Possibly this caused a confusion on your side.
> 
> Ack, I think I got it now. I also see the registers used downstream
> now, e.g.:
> 
> techpack/display/pll/dp_pll_10nm_util.c:#define QSERDES_COM_LOCK_CMP2_MODE0             0x009C
> 
> So now .dp_serdes should be 0x2000. Do I need to change anything else
> also? I think not?

You also need to add new dp_tx/rx pointers to the offset struct and use
those in favour of the current ones if set. I think we hashed that bit
out in one of the previous versions of this patch.

Johan