[PATCH v4 10/12] PCI: qcom: Add SM8550 PCIe support

Abel Vesa abel.vesa at linaro.org
Thu Jan 19 07:35:08 PST 2023


On 23-01-19 19:51:55, Manivannan Sadhasivam wrote:
> On Thu, Jan 19, 2023 at 04:04:51PM +0200, Abel Vesa wrote:
> > Add compatible for both PCIe found on SM8550.
> > Also add the cnoc_pcie_sf_axi clock needed by the SM8550.
> > 
> > Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> 
> Reviewed-by: Manivannan Sadhasivam <mani at kernel.org>
> 
> > Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > ---
> > 
> > The v3 of this patchset is:
> > https://lore.kernel.org/all/20230119112453.3393911-1-abel.vesa@linaro.org/
> > 
> > Changes since v3:
> >  * renamed cnoc_pcie_sf_axi to cnoc_sf_axi
> > 
> > Changes since v2:
> >  * none
> >  
> > Changes since v1:
> >  * changed the subject line prefix for the patch to match the history,
> >    like Bjorn Helgaas suggested.
> >  * added Konrad's R-b tag
> > 
> > 
> >  drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 77e5dc7b88ad..30f74bc51dbf 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -182,7 +182,7 @@ struct qcom_pcie_resources_2_3_3 {
> >  
> >  /* 6 clocks typically, 7 for sm8250 */
> 
> Now this comment is outdated ;)
> 

Fair point. I'll wait for some more comments before
I'll send a new version.

> Thanks,
> Mani
> 
> >  struct qcom_pcie_resources_2_7_0 {
> > -	struct clk_bulk_data clks[12];
> > +	struct clk_bulk_data clks[13];
> >  	int num_clks;
> >  	struct regulator_bulk_data supplies[2];
> >  	struct reset_control *pci_reset;
> > @@ -1208,6 +1208,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
> >  	res->clks[idx++].id = "noc_aggr_4";
> >  	res->clks[idx++].id = "noc_aggr_south_sf";
> >  	res->clks[idx++].id = "cnoc_qx";
> > +	res->clks[idx++].id = "cnoc_sf_axi";
> >  
> >  	num_opt_clks = idx - num_clks;
> >  	res->num_clks = idx;
> > @@ -1828,6 +1829,7 @@ static const struct of_device_id qcom_pcie_match[] = {
> >  	{ .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 },
> >  	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
> >  	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
> > +	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
> >  	{ }
> >  };
> >  
> > -- 
> > 2.34.1
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்



More information about the linux-phy mailing list