[PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350

[Dmitry Baryshkov]

On 12/01/2023 19:50, Vinod Koul wrote:
> On 28-12-22, 15:17, Johan Hovold wrote:
>> Luca, Vinod,
>>
>> On Wed, Nov 30, 2022 at 09:14:28AM +0100, Luca Weiss wrote:
>>> Add the tables and config for the combo phy found on SM6350.
>>>
>>> Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
>>> ---
>>> Changes since v2:
>>> * Drop dp_txa/dp_txb changes, not required
>>> * Fix dp_dp_phy offset
>>>
>>>   drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 126 ++++++++++++++++++++++
>>>   1 file changed, 126 insertions(+)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index 77052c66cf70..6ac0c68269dc 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>
>>> @@ -975,6 +1039,19 @@ static const char * const sc7180_usb3phy_reset_l[] = {
>>>   	"phy",
>>>   };
>>>   
>>> +static const struct qmp_combo_offsets qmp_combo_offsets_v3 = {
>>> +	.com		= 0x0000,
>>> +	.txa		= 0x1200,
>>> +	.rxa		= 0x1400,
>>> +	.txb		= 0x1600,
>>> +	.rxb		= 0x1800,
>>> +	.usb3_serdes	= 0x1000,
>>> +	.usb3_pcs_misc	= 0x1a00,
>>> +	.usb3_pcs	= 0x1c00,
>>> +	.dp_serdes	= 0x1000,
>>
>> I would have expected this to be 0x2000 as that's what the older
>> platforms have been using for the dp serdes table so far. Without access
>> to any documentation it's hard to tell whether everyone's just been
>> cargo-culting all along or if there's actually something there at offset
>> 0x2000.

usb3_serdes is 0x1000, so dp_serdes equal to 0x1000 is definitely an typo.

Judging from the downstream dtsi, the DP PHY starts at offset 0x2000. So 
dp_serdes is equal to 0x2000, dp_phy = 0x2a00, ln_tx1 = 0x2200, ln_tx2 = 
0x2600.

>>
>> Vinod, could you shed some light on this as presumably you have access
>> to some documentation?
>>
>>> +	.dp_dp_phy	= 0x2a00,
> 
> No sorry, I dont have access to this version...
> 

-- 
With best wishes
Dmitry