[Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
Gatien CHEVALLIER
gatien.chevallier at foss.st.com
Mon Feb 27 03:26:48 PST 2023
Hello Ahmad,
Sorry for the delay :)
On 2/13/23 12:27, Ahmad Fatoum wrote:
> Hello Gatien,
>
> On 13.02.23 11:54, Gatien CHEVALLIER wrote:
>> On 2/9/23 09:10, Ahmad Fatoum wrote:
>>> On 09.02.23 08:46, Ahmad Fatoum wrote:
>>>> Hello Gatien,
>>>>
>>>> On 27.01.23 17:40, Gatien Chevallier wrote:
>>>>> The STM32 System Bus is an internal bus on which devices are connected.
>>>>> ETZPC is a peripheral overseeing the firewall bus that configures
>>>>> and control access to the peripherals connected on it.
>>>>>
>>>>> For more information on which peripheral is securable, please read
>>>>> the STM32MP13 reference manual.
>>>>
>>>> Diff is way too big. Please split up the alphabetic reordering into its
>>>> own commit, so actual functional changes are apparent.
>>>
>>> Ah, I see now that you are moving securable peripherals into a new bus.
>>> I share Uwe's confusion of considering the ETZPC as bus.
>>>
>>> Does this configuration even change dynamically? Why can't you implement
>>> this binding in the bootloader and have Linux only see a DT where unavailable
>>> nodes are status = "disabled"; secure-status = "okay"?
>>>
>>> For inspiration, see barebox' device tree fixups when devices are disabled
>>> per fuse:
>>>
>>> https://elixir.bootlin.com/barebox/v2023.01.0/source/drivers/base/featctrl.c#L122
>>>
>>> Cheers,
>>> Ahmad
>>
>> This configuration can change dynamically. The binding will be implemented in the bootloader, where the ETZPC is already implemented as a bus in our downstream.
>>
>> I find the mentionned example valid.
>>
>> Now, why is it a bus? :D
>>
>> It is the result of the discussion on the previous submission by Benjamin (Sorry for the lack of link but I saw that you participated on these threads)+ we need the bus mechanism to control whether a subnode should be probed or not. You can see it as a firewall bus.
>>
>> The ETZPC relies on the ARM TrustZone extension to the AHB bus and propagation through bridges to the APB bus. Therefore, I find it relevant to consider it as a bus, what is your opinion?
>>
>> This patchset is a first step to the implementation of an API to control accesses dynamically.
>
> I still don't get what's dynamic about this. Either:
>
> - Configuration _can_ change while Linux is running: You'll need to do
> way more than what your current bus provides to somwhow synchronize state
> with the secure monitor; otherwise a newly secured device will cause the driver
> to trigger data aborts that you'll have to handle and unbind the driver.
> (like if a USB drive is yanked out).
>
> - Configuration _can't_ change while Linux is running: You can have the bootloader
> fixup the device tree and Linux need not care at all about devices that the
> ETZPC is securing.
>
> My understanding is that the latter is your use case, so I don't see why we
> even need the normal world to be aware of the partitioning.
>
> Cheers,
> Ahmad
>
What about the case where we do not have a U-Boot/bootloader to fixup
the device tree?
On the other hand, ETZPC is a hardware firewall and is on the bus.
Therefore, shouldn't it be represented as a bus in the file that
describes the hardware?
Best regards,
Gatien
>>
>>>
>>>>
>>>> Thanks,
>>>> Ahmad
>>>>
>>>>>
>>>>> Signed-off-by: Gatien Chevallier <gatien.chevallier at foss.st.com>
>>>>> ---
>>>>>
>>>>> No changes in V2.
>>>>>
>>>>> Changes in V3:
>>>>> -Use appriopriate node name: bus
>>>>>
>>>>> arch/arm/boot/dts/stm32mp131.dtsi | 407 +++++++++++++++--------------
>>>>> arch/arm/boot/dts/stm32mp133.dtsi | 51 ++--
>>>>> arch/arm/boot/dts/stm32mp13xc.dtsi | 19 +-
>>>>> arch/arm/boot/dts/stm32mp13xf.dtsi | 18 +-
>>>>> 4 files changed, 258 insertions(+), 237 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
>>>>> index accc3824f7e9..24462a647101 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp131.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
>>>>> @@ -253,148 +253,6 @@ dmamux1: dma-router at 48002000 {
>>>>> dma-channels = <16>;
>>>>> };
>>>>> - adc_2: adc at 48004000 {
>>>>> - compatible = "st,stm32mp13-adc-core";
>>>>> - reg = <0x48004000 0x400>;
>>>>> - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc ADC2>, <&rcc ADC2_K>;
>>>>> - clock-names = "bus", "adc";
>>>>> - interrupt-controller;
>>>>> - #interrupt-cells = <1>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - status = "disabled";
>>>>> -
>>>>> - adc2: adc at 0 {
>>>>> - compatible = "st,stm32mp13-adc";
>>>>> - #io-channel-cells = <1>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - reg = <0x0>;
>>>>> - interrupt-parent = <&adc_2>;
>>>>> - interrupts = <0>;
>>>>> - dmas = <&dmamux1 10 0x400 0x80000001>;
>>>>> - dma-names = "rx";
>>>>> - status = "disabled";
>>>>> -
>>>>> - channel at 13 {
>>>>> - reg = <13>;
>>>>> - label = "vrefint";
>>>>> - };
>>>>> - channel at 14 {
>>>>> - reg = <14>;
>>>>> - label = "vddcore";
>>>>> - };
>>>>> - channel at 16 {
>>>>> - reg = <16>;
>>>>> - label = "vddcpu";
>>>>> - };
>>>>> - channel at 17 {
>>>>> - reg = <17>;
>>>>> - label = "vddq_ddr";
>>>>> - };
>>>>> - };
>>>>> - };
>>>>> -
>>>>> - usbotg_hs: usb at 49000000 {
>>>>> - compatible = "st,stm32mp15-hsotg", "snps,dwc2";
>>>>> - reg = <0x49000000 0x40000>;
>>>>> - clocks = <&rcc USBO_K>;
>>>>> - clock-names = "otg";
>>>>> - resets = <&rcc USBO_R>;
>>>>> - reset-names = "dwc2";
>>>>> - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - g-rx-fifo-size = <512>;
>>>>> - g-np-tx-fifo-size = <32>;
>>>>> - g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
>>>>> - dr_mode = "otg";
>>>>> - otg-rev = <0x200>;
>>>>> - usb33d-supply = <&usb33>;
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> - spi4: spi at 4c002000 {
>>>>> - compatible = "st,stm32h7-spi";
>>>>> - reg = <0x4c002000 0x400>;
>>>>> - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc SPI4_K>;
>>>>> - resets = <&rcc SPI4_R>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - dmas = <&dmamux1 83 0x400 0x01>,
>>>>> - <&dmamux1 84 0x400 0x01>;
>>>>> - dma-names = "rx", "tx";
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> - spi5: spi at 4c003000 {
>>>>> - compatible = "st,stm32h7-spi";
>>>>> - reg = <0x4c003000 0x400>;
>>>>> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc SPI5_K>;
>>>>> - resets = <&rcc SPI5_R>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - dmas = <&dmamux1 85 0x400 0x01>,
>>>>> - <&dmamux1 86 0x400 0x01>;
>>>>> - dma-names = "rx", "tx";
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> - i2c3: i2c at 4c004000 {
>>>>> - compatible = "st,stm32mp13-i2c";
>>>>> - reg = <0x4c004000 0x400>;
>>>>> - interrupt-names = "event", "error";
>>>>> - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>> - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc I2C3_K>;
>>>>> - resets = <&rcc I2C3_R>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - dmas = <&dmamux1 73 0x400 0x1>,
>>>>> - <&dmamux1 74 0x400 0x1>;
>>>>> - dma-names = "rx", "tx";
>>>>> - st,syscfg-fmp = <&syscfg 0x4 0x4>;
>>>>> - i2c-analog-filter;
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> - i2c4: i2c at 4c005000 {
>>>>> - compatible = "st,stm32mp13-i2c";
>>>>> - reg = <0x4c005000 0x400>;
>>>>> - interrupt-names = "event", "error";
>>>>> - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>>>>> - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc I2C4_K>;
>>>>> - resets = <&rcc I2C4_R>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - dmas = <&dmamux1 75 0x400 0x1>,
>>>>> - <&dmamux1 76 0x400 0x1>;
>>>>> - dma-names = "rx", "tx";
>>>>> - st,syscfg-fmp = <&syscfg 0x4 0x8>;
>>>>> - i2c-analog-filter;
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> - i2c5: i2c at 4c006000 {
>>>>> - compatible = "st,stm32mp13-i2c";
>>>>> - reg = <0x4c006000 0x400>;
>>>>> - interrupt-names = "event", "error";
>>>>> - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc I2C5_K>;
>>>>> - resets = <&rcc I2C5_R>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - dmas = <&dmamux1 115 0x400 0x1>,
>>>>> - <&dmamux1 116 0x400 0x1>;
>>>>> - dma-names = "rx", "tx";
>>>>> - st,syscfg-fmp = <&syscfg 0x4 0x10>;
>>>>> - i2c-analog-filter;
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> rcc: rcc at 50000000 {
>>>>> compatible = "st,stm32mp13-rcc", "syscon";
>>>>> reg = <0x50000000 0x1000>;
>>>>> @@ -431,34 +289,6 @@ mdma: dma-controller at 58000000 {
>>>>> dma-requests = <48>;
>>>>> };
>>>>> - sdmmc1: mmc at 58005000 {
>>>>> - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> - arm,primecell-periphid = <0x20253180>;
>>>>> - reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
>>>>> - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc SDMMC1_K>;
>>>>> - clock-names = "apb_pclk";
>>>>> - resets = <&rcc SDMMC1_R>;
>>>>> - cap-sd-highspeed;
>>>>> - cap-mmc-highspeed;
>>>>> - max-frequency = <130000000>;
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> - sdmmc2: mmc at 58007000 {
>>>>> - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> - arm,primecell-periphid = <0x20253180>;
>>>>> - reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
>>>>> - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc SDMMC2_K>;
>>>>> - clock-names = "apb_pclk";
>>>>> - resets = <&rcc SDMMC2_R>;
>>>>> - cap-sd-highspeed;
>>>>> - cap-mmc-highspeed;
>>>>> - max-frequency = <130000000>;
>>>>> - status = "disabled";
>>>>> - };
>>>>> -
>>>>> usbh_ohci: usb at 5800c000 {
>>>>> compatible = "generic-ohci";
>>>>> reg = <0x5800c000 0x1000>;
>>>>> @@ -486,29 +316,6 @@ iwdg2: watchdog at 5a002000 {
>>>>> status = "disabled";
>>>>> };
>>>>> - usbphyc: usbphyc at 5a006000 {
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - #clock-cells = <0>;
>>>>> - compatible = "st,stm32mp1-usbphyc";
>>>>> - reg = <0x5a006000 0x1000>;
>>>>> - clocks = <&rcc USBPHY_K>;
>>>>> - resets = <&rcc USBPHY_R>;
>>>>> - vdda1v1-supply = <®11>;
>>>>> - vdda1v8-supply = <®18>;
>>>>> - status = "disabled";
>>>>> -
>>>>> - usbphyc_port0: usb-phy at 0 {
>>>>> - #phy-cells = <0>;
>>>>> - reg = <0>;
>>>>> - };
>>>>> -
>>>>> - usbphyc_port1: usb-phy at 1 {
>>>>> - #phy-cells = <1>;
>>>>> - reg = <1>;
>>>>> - };
>>>>> - };
>>>>> -
>>>>> rtc: rtc at 5c004000 {
>>>>> compatible = "st,stm32mp1-rtc";
>>>>> reg = <0x5c004000 0x400>;
>>>>> @@ -536,6 +343,220 @@ ts_cal2: calib at 5e {
>>>>> };
>>>>> };
>>>>> + etzpc: bus at 5c007000 {
>>>>> + compatible = "st,stm32mp13-sys-bus";
>>>>> + reg = <0x5c007000 0x400>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <1>;
>>>>> + feature-domain-controller;
>>>>> + #feature-domain-cells = <1>;
>>>>> + ranges;
>>>>> +
>>>>> + adc_2: adc at 48004000 {
>>>>> + compatible = "st,stm32mp13-adc-core";
>>>>> + reg = <0x48004000 0x400>;
>>>>> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc ADC2>, <&rcc ADC2_K>;
>>>>> + clock-names = "bus", "adc";
>>>>> + interrupt-controller;
>>>>> + #interrupt-cells = <1>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + feature-domains = <&etzpc 33>;
>>>>> + status = "disabled";
>>>>> +
>>>>> + adc2: adc at 0 {
>>>>> + compatible = "st,stm32mp13-adc";
>>>>> + #io-channel-cells = <1>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + reg = <0x0>;
>>>>> + interrupt-parent = <&adc_2>;
>>>>> + interrupts = <0>;
>>>>> + dmas = <&dmamux1 10 0x400 0x80000001>;
>>>>> + dma-names = "rx";
>>>>> + status = "disabled";
>>>>> +
>>>>> + channel at 13 {
>>>>> + reg = <13>;
>>>>> + label = "vrefint";
>>>>> + };
>>>>> + channel at 14 {
>>>>> + reg = <14>;
>>>>> + label = "vddcore";
>>>>> + };
>>>>> + channel at 16 {
>>>>> + reg = <16>;
>>>>> + label = "vddcpu";
>>>>> + };
>>>>> + channel at 17 {
>>>>> + reg = <17>;
>>>>> + label = "vddq_ddr";
>>>>> + };
>>>>> + };
>>>>> + };
>>>>> +
>>>>> + usbotg_hs: usb at 49000000 {
>>>>> + compatible = "st,stm32mp15-hsotg", "snps,dwc2";
>>>>> + reg = <0x49000000 0x40000>;
>>>>> + clocks = <&rcc USBO_K>;
>>>>> + clock-names = "otg";
>>>>> + resets = <&rcc USBO_R>;
>>>>> + reset-names = "dwc2";
>>>>> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + g-rx-fifo-size = <512>;
>>>>> + g-np-tx-fifo-size = <32>;
>>>>> + g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
>>>>> + dr_mode = "otg";
>>>>> + otg-rev = <0x200>;
>>>>> + usb33d-supply = <&usb33>;
>>>>> + feature-domains = <&etzpc 34>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + spi4: spi at 4c002000 {
>>>>> + compatible = "st,stm32h7-spi";
>>>>> + reg = <0x4c002000 0x400>;
>>>>> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc SPI4_K>;
>>>>> + resets = <&rcc SPI4_R>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + dmas = <&dmamux1 83 0x400 0x01>,
>>>>> + <&dmamux1 84 0x400 0x01>;
>>>>> + dma-names = "rx", "tx";
>>>>> + feature-domains = <&etzpc 18>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + spi5: spi at 4c003000 {
>>>>> + compatible = "st,stm32h7-spi";
>>>>> + reg = <0x4c003000 0x400>;
>>>>> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc SPI5_K>;
>>>>> + resets = <&rcc SPI5_R>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + dmas = <&dmamux1 85 0x400 0x01>,
>>>>> + <&dmamux1 86 0x400 0x01>;
>>>>> + dma-names = "rx", "tx";
>>>>> + feature-domains = <&etzpc 19>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + i2c3: i2c at 4c004000 {
>>>>> + compatible = "st,stm32mp13-i2c";
>>>>> + reg = <0x4c004000 0x400>;
>>>>> + interrupt-names = "event", "error";
>>>>> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>> + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc I2C3_K>;
>>>>> + resets = <&rcc I2C3_R>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + dmas = <&dmamux1 73 0x400 0x1>,
>>>>> + <&dmamux1 74 0x400 0x1>;
>>>>> + dma-names = "rx", "tx";
>>>>> + st,syscfg-fmp = <&syscfg 0x4 0x4>;
>>>>> + i2c-analog-filter;
>>>>> + feature-domains = <&etzpc 20>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + i2c4: i2c at 4c005000 {
>>>>> + compatible = "st,stm32mp13-i2c";
>>>>> + reg = <0x4c005000 0x400>;
>>>>> + interrupt-names = "event", "error";
>>>>> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>>>>> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc I2C4_K>;
>>>>> + resets = <&rcc I2C4_R>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + dmas = <&dmamux1 75 0x400 0x1>,
>>>>> + <&dmamux1 76 0x400 0x1>;
>>>>> + dma-names = "rx", "tx";
>>>>> + st,syscfg-fmp = <&syscfg 0x4 0x8>;
>>>>> + i2c-analog-filter;
>>>>> + feature-domains = <&etzpc 21>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + i2c5: i2c at 4c006000 {
>>>>> + compatible = "st,stm32mp13-i2c";
>>>>> + reg = <0x4c006000 0x400>;
>>>>> + interrupt-names = "event", "error";
>>>>> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc I2C5_K>;
>>>>> + resets = <&rcc I2C5_R>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + dmas = <&dmamux1 115 0x400 0x1>,
>>>>> + <&dmamux1 116 0x400 0x1>;
>>>>> + dma-names = "rx", "tx";
>>>>> + st,syscfg-fmp = <&syscfg 0x4 0x10>;
>>>>> + i2c-analog-filter;
>>>>> + feature-domains = <&etzpc 22>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + sdmmc1: mmc at 58005000 {
>>>>> + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> + arm,primecell-periphid = <0x20253180>;
>>>>> + reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
>>>>> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc SDMMC1_K>;
>>>>> + clock-names = "apb_pclk";
>>>>> + resets = <&rcc SDMMC1_R>;
>>>>> + cap-sd-highspeed;
>>>>> + cap-mmc-highspeed;
>>>>> + max-frequency = <130000000>;
>>>>> + feature-domains = <&etzpc 50>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + sdmmc2: mmc at 58007000 {
>>>>> + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> + arm,primecell-periphid = <0x20253180>;
>>>>> + reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
>>>>> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc SDMMC2_K>;
>>>>> + clock-names = "apb_pclk";
>>>>> + resets = <&rcc SDMMC2_R>;
>>>>> + cap-sd-highspeed;
>>>>> + cap-mmc-highspeed;
>>>>> + max-frequency = <130000000>;
>>>>> + feature-domains = <&etzpc 51>;
>>>>> + status = "disabled";
>>>>> + };
>>>>> +
>>>>> + usbphyc: usbphyc at 5a006000 {
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + #clock-cells = <0>;
>>>>> + compatible = "st,stm32mp1-usbphyc";
>>>>> + reg = <0x5a006000 0x1000>;
>>>>> + clocks = <&rcc USBPHY_K>;
>>>>> + resets = <&rcc USBPHY_R>;
>>>>> + vdda1v1-supply = <®11>;
>>>>> + vdda1v8-supply = <®18>;
>>>>> + feature-domains = <&etzpc 5>;
>>>>> + status = "disabled";
>>>>> +
>>>>> + usbphyc_port0: usb-phy at 0 {
>>>>> + #phy-cells = <0>;
>>>>> + reg = <0>;
>>>>> + };
>>>>> +
>>>>> + usbphyc_port1: usb-phy at 1 {
>>>>> + #phy-cells = <1>;
>>>>> + reg = <1>;
>>>>> + };
>>>>> + };
>>>>> +
>>>>> + };
>>>>> +
>>>>> /*
>>>>> * Break node order to solve dependency probe issue between
>>>>> * pinctrl and exti.
>>>>> diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
>>>>> index df451c3c2a26..be6061552683 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp133.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp133.dtsi
>>>>> @@ -33,35 +33,38 @@ m_can2: can at 4400f000 {
>>>>> bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
>>>>> status = "disabled";
>>>>> };
>>>>> + };
>>>>> +};
>>>>> - adc_1: adc at 48003000 {
>>>>> - compatible = "st,stm32mp13-adc-core";
>>>>> - reg = <0x48003000 0x400>;
>>>>> - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc ADC1>, <&rcc ADC1_K>;
>>>>> - clock-names = "bus", "adc";
>>>>> - interrupt-controller;
>>>>> - #interrupt-cells = <1>;
>>>>> +&etzpc {
>>>>> + adc_1: adc at 48003000 {
>>>>> + compatible = "st,stm32mp13-adc-core";
>>>>> + reg = <0x48003000 0x400>;
>>>>> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc ADC1>, <&rcc ADC1_K>;
>>>>> + clock-names = "bus", "adc";
>>>>> + interrupt-controller;
>>>>> + #interrupt-cells = <1>;
>>>>> + #address-cells = <1>;
>>>>> + #size-cells = <0>;
>>>>> + feature-domains = <&etzpc 32>;
>>>>> + status = "disabled";
>>>>> +
>>>>> + adc1: adc at 0 {
>>>>> + compatible = "st,stm32mp13-adc";
>>>>> + #io-channel-cells = <1>;
>>>>> #address-cells = <1>;
>>>>> #size-cells = <0>;
>>>>> + reg = <0x0>;
>>>>> + interrupt-parent = <&adc_1>;
>>>>> + interrupts = <0>;
>>>>> + dmas = <&dmamux1 9 0x400 0x80000001>;
>>>>> + dma-names = "rx";
>>>>> status = "disabled";
>>>>> - adc1: adc at 0 {
>>>>> - compatible = "st,stm32mp13-adc";
>>>>> - #io-channel-cells = <1>;
>>>>> - #address-cells = <1>;
>>>>> - #size-cells = <0>;
>>>>> - reg = <0x0>;
>>>>> - interrupt-parent = <&adc_1>;
>>>>> - interrupts = <0>;
>>>>> - dmas = <&dmamux1 9 0x400 0x80000001>;
>>>>> - dma-names = "rx";
>>>>> - status = "disabled";
>>>>> -
>>>>> - channel at 18 {
>>>>> - reg = <18>;
>>>>> - label = "vrefint";
>>>>> - };
>>>>> + channel at 18 {
>>>>> + reg = <18>;
>>>>> + label = "vrefint";
>>>>> };
>>>>> };
>>>>> };
>>>>> diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
>>>>> index 4d00e7592882..a1a7a40c2a3e 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp13xc.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
>>>>> @@ -4,15 +4,14 @@
>>>>> * Author: Alexandre Torgue <alexandre.torgue at foss.st.com> for STMicroelectronics.
>>>>> */
>>>>> -/ {
>>>>> - soc {
>>>>> - cryp: crypto at 54002000 {
>>>>> - compatible = "st,stm32mp1-cryp";
>>>>> - reg = <0x54002000 0x400>;
>>>>> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc CRYP1>;
>>>>> - resets = <&rcc CRYP1_R>;
>>>>> - status = "disabled";
>>>>> - };
>>>>> +&etzpc {
>>>>> + cryp: crypto at 54002000 {
>>>>> + compatible = "st,stm32mp1-cryp";
>>>>> + reg = <0x54002000 0x400>;
>>>>> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc CRYP1>;
>>>>> + resets = <&rcc CRYP1_R>;
>>>>> + feature-domains = <&etzpc 42>;
>>>>> + status = "disabled";
>>>>> };
>>>>> };
>>>>> diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
>>>>> index 4d00e7592882..b9fb071a1471 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp13xf.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
>>>>> @@ -4,15 +4,13 @@
>>>>> * Author: Alexandre Torgue <alexandre.torgue at foss.st.com> for STMicroelectronics.
>>>>> */
>>>>> -/ {
>>>>> - soc {
>>>>> - cryp: crypto at 54002000 {
>>>>> - compatible = "st,stm32mp1-cryp";
>>>>> - reg = <0x54002000 0x400>;
>>>>> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> - clocks = <&rcc CRYP1>;
>>>>> - resets = <&rcc CRYP1_R>;
>>>>> - status = "disabled";
>>>>> - };
>>>>> +&etzpc {
>>>>> + cryp: crypto at 54002000 {
>>>>> + compatible = "st,stm32mp1-cryp";
>>>>> + reg = <0x54002000 0x400>;
>>>>> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> + clocks = <&rcc CRYP1>;
>>>>> + resets = <&rcc CRYP1_R>;
>>>>> + status = "disabled";
>>>>> };
>>>>> };
>>>>
>>>
>>
>> Regarding the patch itself, I can separate it in two patches.
>> 1)Introduce ETZPC
>> 2)Move peripherals under ETZPC
>>
>> Best regards,
>> Gatien
>>
>
More information about the linux-phy
mailing list