[PATCH 05/11] ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node

[Manivannan Sadhasivam]

On Wed, Feb 22, 2023 at 05:02:08PM +0100, Konrad Dybcio wrote:
> 
> 
> On 22.02.2023 16:32, Manivannan Sadhasivam wrote:
> > Unit address of PCIe EP node should be 0x1c00000 as it has to match the
> > first address specified in the reg property.
> > 
> > This also requires sorting the node in the ascending order.
> > 
> > Fixes: 31c9ef002580 ("dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller")
> Unsure, we aren't fixing the bindings..
> 

Err... will fix the tag in next version.

Thanks,
Mani

> 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> > ---
> For the dt change:
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> 
> Konrad
> >  arch/arm/boot/dts/qcom-sdx55.dtsi | 78 +++++++++++++++----------------
> >  1 file changed, 39 insertions(+), 39 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> > index 93d71aff3fab..e84ca795cae6 100644
> > --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> > +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> > @@ -303,6 +303,45 @@ qpic_nand: nand-controller at 1b30000 {
> >  			status = "disabled";
> >  		};
> >  
> > +		pcie_ep: pcie-ep at 1c00000 {
> > +			compatible = "qcom,sdx55-pcie-ep";
> > +			reg = <0x01c00000 0x3000>,
> > +			      <0x40000000 0xf1d>,
> > +			      <0x40000f20 0xc8>,
> > +			      <0x40001000 0x1000>,
> > +			      <0x40200000 0x100000>,
> > +			      <0x01c03000 0x3000>;
> > +			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
> > +				    "mmio";
> > +
> > +			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
> > +
> > +			clocks = <&gcc GCC_PCIE_AUX_CLK>,
> > +				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
> > +				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
> > +				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
> > +				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
> > +				 <&gcc GCC_PCIE_SLEEP_CLK>,
> > +				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
> > +			clock-names = "aux", "cfg", "bus_master", "bus_slave",
> > +				      "slave_q2a", "sleep", "ref";
> > +
> > +			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "global", "doorbell";
> > +			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
> > +			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> > +			resets = <&gcc GCC_PCIE_BCR>;
> > +			reset-names = "core";
> > +			power-domains = <&gcc PCIE_GDSC>;
> > +			phys = <&pcie0_lane>;
> > +			phy-names = "pciephy";
> > +			max-link-speed = <3>;
> > +			num-lanes = <2>;
> > +
> > +			status = "disabled";
> > +		};
> > +
> >  		pcie0_phy: phy at 1c07000 {
> >  			compatible = "qcom,sdx55-qmp-pcie-phy";
> >  			reg = <0x01c07000 0x1c4>;
> > @@ -400,45 +439,6 @@ sdhc_1: mmc at 8804000 {
> >  			status = "disabled";
> >  		};
> >  
> > -		pcie_ep: pcie-ep at 40000000 {
> > -			compatible = "qcom,sdx55-pcie-ep";
> > -			reg = <0x01c00000 0x3000>,
> > -			      <0x40000000 0xf1d>,
> > -			      <0x40000f20 0xc8>,
> > -			      <0x40001000 0x1000>,
> > -			      <0x40200000 0x100000>,
> > -			      <0x01c03000 0x3000>;
> > -			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
> > -				    "mmio";
> > -
> > -			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
> > -
> > -			clocks = <&gcc GCC_PCIE_AUX_CLK>,
> > -				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
> > -				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
> > -				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
> > -				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
> > -				 <&gcc GCC_PCIE_SLEEP_CLK>,
> > -				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
> > -			clock-names = "aux", "cfg", "bus_master", "bus_slave",
> > -				      "slave_q2a", "sleep", "ref";
> > -
> > -			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> > -				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
> > -			interrupt-names = "global", "doorbell";
> > -			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
> > -			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> > -			resets = <&gcc GCC_PCIE_BCR>;
> > -			reset-names = "core";
> > -			power-domains = <&gcc PCIE_GDSC>;
> > -			phys = <&pcie0_lane>;
> > -			phy-names = "pciephy";
> > -			max-link-speed = <3>;
> > -			num-lanes = <2>;
> > -
> > -			status = "disabled";
> > -		};
> > -
> >  		remoteproc_mpss: remoteproc at 4080000 {
> >  			compatible = "qcom,sdx55-mpss-pas";
> >  			reg = <0x04080000 0x4040>;