[PATCH 6/7] clk: qcom: gcc-ipq9574: Add PCIe related clocks

[Devi Priya]

On 2/17/2023 2:11 PM, Sricharan Ramabadhran wrote:
> Hi Devi,
> 
> On 2/14/2023 10:11 PM, Devi Priya wrote:
>> Add the clocks needed for enabling PCIe in IPQ9574
>>
>> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>> ---
>>   drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++++++++++++++++++++++++++
>>   1 file changed, 76 insertions(+)
>>
>> diff --git a/drivers/clk/qcom/gcc-ipq9574.c 
>> b/drivers/clk/qcom/gcc-ipq9574.c
>> index b2a2d618a5ec..1bf33d582dc2 100644
>> --- a/drivers/clk/qcom/gcc-ipq9574.c
>> +++ b/drivers/clk/qcom/gcc-ipq9574.c
>> @@ -1538,6 +1538,24 @@ static struct clk_regmap_phy_mux 
>> pcie0_pipe_clk_src = {
>>       },
>>   };
>> +static struct clk_branch gcc_pcie0_pipe_clk = {
>> +    .halt_reg = 0x28044,
>> +    .halt_check = BRANCH_HALT_DELAY,
>> +    .clkr = {
>> +        .enable_reg = 0x28044,
>> +        .enable_mask = BIT(0),
>> +        .hw.init = &(struct clk_init_data){
>> +            .name = "gcc_pcie0_pipe_clk",
>> +            .parent_hws = (const struct clk_hw *[]) {
>> +                &pcie0_pipe_clk_src.clkr.hw
>> +            },
>> +            .num_parents = 1,
>> +            .flags = CLK_SET_RATE_PARENT,
>> +            .ops = &clk_branch2_ops,
>> +        },
>> +    },
>> +};
>> +
>>   static struct clk_regmap_phy_mux pcie1_pipe_clk_src = {
>>       .reg = 0x29064,
>>       .clkr = {
>> @@ -1552,6 +1570,24 @@ static struct clk_regmap_phy_mux 
>> pcie1_pipe_clk_src = {
>>       },
>>   };
>> +static struct clk_branch gcc_pcie1_pipe_clk = {
>> +    .halt_reg = 0x29044,
>> +    .halt_check = BRANCH_HALT_DELAY,
>> +    .clkr = {
>> +        .enable_reg = 0x29044,
>> +        .enable_mask = BIT(0),
>> +        .hw.init = &(struct clk_init_data){
>> +            .name = "gcc_pcie1_pipe_clk",
>> +            .parent_hws = (const struct clk_hw *[]) {
>> +                &pcie1_pipe_clk_src.clkr.hw
>> +            },
>> +        .num_parents = 1,
>> +        .flags = CLK_SET_RATE_PARENT,
>> +        .ops = &clk_branch2_ops,
>> +        },
> 
>   Looks like indentation issue for the above hunk.
Sure, will update this in V2

Best Regards,
Devi Priya
> 
> Regards,
>   Sricharan