[Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
Gatien CHEVALLIER
gatien.chevallier at foss.st.com
Mon Feb 13 02:54:46 PST 2023
Hi Ahmad, Uwe,
On 2/9/23 09:10, Ahmad Fatoum wrote:
> On 09.02.23 08:46, Ahmad Fatoum wrote:
>> Hello Gatien,
>>
>> On 27.01.23 17:40, Gatien Chevallier wrote:
>>> The STM32 System Bus is an internal bus on which devices are connected.
>>> ETZPC is a peripheral overseeing the firewall bus that configures
>>> and control access to the peripherals connected on it.
>>>
>>> For more information on which peripheral is securable, please read
>>> the STM32MP13 reference manual.
>>
>> Diff is way too big. Please split up the alphabetic reordering into its
>> own commit, so actual functional changes are apparent.
>
> Ah, I see now that you are moving securable peripherals into a new bus.
> I share Uwe's confusion of considering the ETZPC as bus.
>
> Does this configuration even change dynamically? Why can't you implement
> this binding in the bootloader and have Linux only see a DT where unavailable
> nodes are status = "disabled"; secure-status = "okay"?
>
> For inspiration, see barebox' device tree fixups when devices are disabled
> per fuse:
>
> https://elixir.bootlin.com/barebox/v2023.01.0/source/drivers/base/featctrl.c#L122
>
> Cheers,
> Ahmad
This configuration can change dynamically. The binding will be
implemented in the bootloader, where the ETZPC is already implemented as
a bus in our downstream.
I find the mentionned example valid.
Now, why is it a bus? :D
It is the result of the discussion on the previous submission by
Benjamin (Sorry for the lack of link but I saw that you participated on
these threads)+ we need the bus mechanism to control whether a subnode
should be probed or not. You can see it as a firewall bus.
The ETZPC relies on the ARM TrustZone extension to the AHB bus and
propagation through bridges to the APB bus. Therefore, I find it
relevant to consider it as a bus, what is your opinion?
This patchset is a first step to the implementation of an API to control
accesses dynamically.
>
>>
>> Thanks,
>> Ahmad
>>
>>>
>>> Signed-off-by: Gatien Chevallier <gatien.chevallier at foss.st.com>
>>> ---
>>>
>>> No changes in V2.
>>>
>>> Changes in V3:
>>> -Use appriopriate node name: bus
>>>
>>> arch/arm/boot/dts/stm32mp131.dtsi | 407 +++++++++++++++--------------
>>> arch/arm/boot/dts/stm32mp133.dtsi | 51 ++--
>>> arch/arm/boot/dts/stm32mp13xc.dtsi | 19 +-
>>> arch/arm/boot/dts/stm32mp13xf.dtsi | 18 +-
>>> 4 files changed, 258 insertions(+), 237 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
>>> index accc3824f7e9..24462a647101 100644
>>> --- a/arch/arm/boot/dts/stm32mp131.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
>>> @@ -253,148 +253,6 @@ dmamux1: dma-router at 48002000 {
>>> dma-channels = <16>;
>>> };
>>>
>>> - adc_2: adc at 48004000 {
>>> - compatible = "st,stm32mp13-adc-core";
>>> - reg = <0x48004000 0x400>;
>>> - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc ADC2>, <&rcc ADC2_K>;
>>> - clock-names = "bus", "adc";
>>> - interrupt-controller;
>>> - #interrupt-cells = <1>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - status = "disabled";
>>> -
>>> - adc2: adc at 0 {
>>> - compatible = "st,stm32mp13-adc";
>>> - #io-channel-cells = <1>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - reg = <0x0>;
>>> - interrupt-parent = <&adc_2>;
>>> - interrupts = <0>;
>>> - dmas = <&dmamux1 10 0x400 0x80000001>;
>>> - dma-names = "rx";
>>> - status = "disabled";
>>> -
>>> - channel at 13 {
>>> - reg = <13>;
>>> - label = "vrefint";
>>> - };
>>> - channel at 14 {
>>> - reg = <14>;
>>> - label = "vddcore";
>>> - };
>>> - channel at 16 {
>>> - reg = <16>;
>>> - label = "vddcpu";
>>> - };
>>> - channel at 17 {
>>> - reg = <17>;
>>> - label = "vddq_ddr";
>>> - };
>>> - };
>>> - };
>>> -
>>> - usbotg_hs: usb at 49000000 {
>>> - compatible = "st,stm32mp15-hsotg", "snps,dwc2";
>>> - reg = <0x49000000 0x40000>;
>>> - clocks = <&rcc USBO_K>;
>>> - clock-names = "otg";
>>> - resets = <&rcc USBO_R>;
>>> - reset-names = "dwc2";
>>> - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>> - g-rx-fifo-size = <512>;
>>> - g-np-tx-fifo-size = <32>;
>>> - g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
>>> - dr_mode = "otg";
>>> - otg-rev = <0x200>;
>>> - usb33d-supply = <&usb33>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - spi4: spi at 4c002000 {
>>> - compatible = "st,stm32h7-spi";
>>> - reg = <0x4c002000 0x400>;
>>> - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc SPI4_K>;
>>> - resets = <&rcc SPI4_R>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - dmas = <&dmamux1 83 0x400 0x01>,
>>> - <&dmamux1 84 0x400 0x01>;
>>> - dma-names = "rx", "tx";
>>> - status = "disabled";
>>> - };
>>> -
>>> - spi5: spi at 4c003000 {
>>> - compatible = "st,stm32h7-spi";
>>> - reg = <0x4c003000 0x400>;
>>> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc SPI5_K>;
>>> - resets = <&rcc SPI5_R>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - dmas = <&dmamux1 85 0x400 0x01>,
>>> - <&dmamux1 86 0x400 0x01>;
>>> - dma-names = "rx", "tx";
>>> - status = "disabled";
>>> - };
>>> -
>>> - i2c3: i2c at 4c004000 {
>>> - compatible = "st,stm32mp13-i2c";
>>> - reg = <0x4c004000 0x400>;
>>> - interrupt-names = "event", "error";
>>> - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc I2C3_K>;
>>> - resets = <&rcc I2C3_R>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - dmas = <&dmamux1 73 0x400 0x1>,
>>> - <&dmamux1 74 0x400 0x1>;
>>> - dma-names = "rx", "tx";
>>> - st,syscfg-fmp = <&syscfg 0x4 0x4>;
>>> - i2c-analog-filter;
>>> - status = "disabled";
>>> - };
>>> -
>>> - i2c4: i2c at 4c005000 {
>>> - compatible = "st,stm32mp13-i2c";
>>> - reg = <0x4c005000 0x400>;
>>> - interrupt-names = "event", "error";
>>> - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc I2C4_K>;
>>> - resets = <&rcc I2C4_R>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - dmas = <&dmamux1 75 0x400 0x1>,
>>> - <&dmamux1 76 0x400 0x1>;
>>> - dma-names = "rx", "tx";
>>> - st,syscfg-fmp = <&syscfg 0x4 0x8>;
>>> - i2c-analog-filter;
>>> - status = "disabled";
>>> - };
>>> -
>>> - i2c5: i2c at 4c006000 {
>>> - compatible = "st,stm32mp13-i2c";
>>> - reg = <0x4c006000 0x400>;
>>> - interrupt-names = "event", "error";
>>> - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc I2C5_K>;
>>> - resets = <&rcc I2C5_R>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - dmas = <&dmamux1 115 0x400 0x1>,
>>> - <&dmamux1 116 0x400 0x1>;
>>> - dma-names = "rx", "tx";
>>> - st,syscfg-fmp = <&syscfg 0x4 0x10>;
>>> - i2c-analog-filter;
>>> - status = "disabled";
>>> - };
>>> -
>>> rcc: rcc at 50000000 {
>>> compatible = "st,stm32mp13-rcc", "syscon";
>>> reg = <0x50000000 0x1000>;
>>> @@ -431,34 +289,6 @@ mdma: dma-controller at 58000000 {
>>> dma-requests = <48>;
>>> };
>>>
>>> - sdmmc1: mmc at 58005000 {
>>> - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>> - arm,primecell-periphid = <0x20253180>;
>>> - reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
>>> - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc SDMMC1_K>;
>>> - clock-names = "apb_pclk";
>>> - resets = <&rcc SDMMC1_R>;
>>> - cap-sd-highspeed;
>>> - cap-mmc-highspeed;
>>> - max-frequency = <130000000>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - sdmmc2: mmc at 58007000 {
>>> - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>> - arm,primecell-periphid = <0x20253180>;
>>> - reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
>>> - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc SDMMC2_K>;
>>> - clock-names = "apb_pclk";
>>> - resets = <&rcc SDMMC2_R>;
>>> - cap-sd-highspeed;
>>> - cap-mmc-highspeed;
>>> - max-frequency = <130000000>;
>>> - status = "disabled";
>>> - };
>>> -
>>> usbh_ohci: usb at 5800c000 {
>>> compatible = "generic-ohci";
>>> reg = <0x5800c000 0x1000>;
>>> @@ -486,29 +316,6 @@ iwdg2: watchdog at 5a002000 {
>>> status = "disabled";
>>> };
>>>
>>> - usbphyc: usbphyc at 5a006000 {
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - #clock-cells = <0>;
>>> - compatible = "st,stm32mp1-usbphyc";
>>> - reg = <0x5a006000 0x1000>;
>>> - clocks = <&rcc USBPHY_K>;
>>> - resets = <&rcc USBPHY_R>;
>>> - vdda1v1-supply = <®11>;
>>> - vdda1v8-supply = <®18>;
>>> - status = "disabled";
>>> -
>>> - usbphyc_port0: usb-phy at 0 {
>>> - #phy-cells = <0>;
>>> - reg = <0>;
>>> - };
>>> -
>>> - usbphyc_port1: usb-phy at 1 {
>>> - #phy-cells = <1>;
>>> - reg = <1>;
>>> - };
>>> - };
>>> -
>>> rtc: rtc at 5c004000 {
>>> compatible = "st,stm32mp1-rtc";
>>> reg = <0x5c004000 0x400>;
>>> @@ -536,6 +343,220 @@ ts_cal2: calib at 5e {
>>> };
>>> };
>>>
>>> + etzpc: bus at 5c007000 {
>>> + compatible = "st,stm32mp13-sys-bus";
>>> + reg = <0x5c007000 0x400>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + feature-domain-controller;
>>> + #feature-domain-cells = <1>;
>>> + ranges;
>>> +
>>> + adc_2: adc at 48004000 {
>>> + compatible = "st,stm32mp13-adc-core";
>>> + reg = <0x48004000 0x400>;
>>> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc ADC2>, <&rcc ADC2_K>;
>>> + clock-names = "bus", "adc";
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + feature-domains = <&etzpc 33>;
>>> + status = "disabled";
>>> +
>>> + adc2: adc at 0 {
>>> + compatible = "st,stm32mp13-adc";
>>> + #io-channel-cells = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + reg = <0x0>;
>>> + interrupt-parent = <&adc_2>;
>>> + interrupts = <0>;
>>> + dmas = <&dmamux1 10 0x400 0x80000001>;
>>> + dma-names = "rx";
>>> + status = "disabled";
>>> +
>>> + channel at 13 {
>>> + reg = <13>;
>>> + label = "vrefint";
>>> + };
>>> + channel at 14 {
>>> + reg = <14>;
>>> + label = "vddcore";
>>> + };
>>> + channel at 16 {
>>> + reg = <16>;
>>> + label = "vddcpu";
>>> + };
>>> + channel at 17 {
>>> + reg = <17>;
>>> + label = "vddq_ddr";
>>> + };
>>> + };
>>> + };
>>> +
>>> + usbotg_hs: usb at 49000000 {
>>> + compatible = "st,stm32mp15-hsotg", "snps,dwc2";
>>> + reg = <0x49000000 0x40000>;
>>> + clocks = <&rcc USBO_K>;
>>> + clock-names = "otg";
>>> + resets = <&rcc USBO_R>;
>>> + reset-names = "dwc2";
>>> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>> + g-rx-fifo-size = <512>;
>>> + g-np-tx-fifo-size = <32>;
>>> + g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
>>> + dr_mode = "otg";
>>> + otg-rev = <0x200>;
>>> + usb33d-supply = <&usb33>;
>>> + feature-domains = <&etzpc 34>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi4: spi at 4c002000 {
>>> + compatible = "st,stm32h7-spi";
>>> + reg = <0x4c002000 0x400>;
>>> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc SPI4_K>;
>>> + resets = <&rcc SPI4_R>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + dmas = <&dmamux1 83 0x400 0x01>,
>>> + <&dmamux1 84 0x400 0x01>;
>>> + dma-names = "rx", "tx";
>>> + feature-domains = <&etzpc 18>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi5: spi at 4c003000 {
>>> + compatible = "st,stm32h7-spi";
>>> + reg = <0x4c003000 0x400>;
>>> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc SPI5_K>;
>>> + resets = <&rcc SPI5_R>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + dmas = <&dmamux1 85 0x400 0x01>,
>>> + <&dmamux1 86 0x400 0x01>;
>>> + dma-names = "rx", "tx";
>>> + feature-domains = <&etzpc 19>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c3: i2c at 4c004000 {
>>> + compatible = "st,stm32mp13-i2c";
>>> + reg = <0x4c004000 0x400>;
>>> + interrupt-names = "event", "error";
>>> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc I2C3_K>;
>>> + resets = <&rcc I2C3_R>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + dmas = <&dmamux1 73 0x400 0x1>,
>>> + <&dmamux1 74 0x400 0x1>;
>>> + dma-names = "rx", "tx";
>>> + st,syscfg-fmp = <&syscfg 0x4 0x4>;
>>> + i2c-analog-filter;
>>> + feature-domains = <&etzpc 20>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c4: i2c at 4c005000 {
>>> + compatible = "st,stm32mp13-i2c";
>>> + reg = <0x4c005000 0x400>;
>>> + interrupt-names = "event", "error";
>>> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc I2C4_K>;
>>> + resets = <&rcc I2C4_R>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + dmas = <&dmamux1 75 0x400 0x1>,
>>> + <&dmamux1 76 0x400 0x1>;
>>> + dma-names = "rx", "tx";
>>> + st,syscfg-fmp = <&syscfg 0x4 0x8>;
>>> + i2c-analog-filter;
>>> + feature-domains = <&etzpc 21>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c5: i2c at 4c006000 {
>>> + compatible = "st,stm32mp13-i2c";
>>> + reg = <0x4c006000 0x400>;
>>> + interrupt-names = "event", "error";
>>> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc I2C5_K>;
>>> + resets = <&rcc I2C5_R>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + dmas = <&dmamux1 115 0x400 0x1>,
>>> + <&dmamux1 116 0x400 0x1>;
>>> + dma-names = "rx", "tx";
>>> + st,syscfg-fmp = <&syscfg 0x4 0x10>;
>>> + i2c-analog-filter;
>>> + feature-domains = <&etzpc 22>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + sdmmc1: mmc at 58005000 {
>>> + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>> + arm,primecell-periphid = <0x20253180>;
>>> + reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
>>> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc SDMMC1_K>;
>>> + clock-names = "apb_pclk";
>>> + resets = <&rcc SDMMC1_R>;
>>> + cap-sd-highspeed;
>>> + cap-mmc-highspeed;
>>> + max-frequency = <130000000>;
>>> + feature-domains = <&etzpc 50>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + sdmmc2: mmc at 58007000 {
>>> + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>> + arm,primecell-periphid = <0x20253180>;
>>> + reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
>>> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc SDMMC2_K>;
>>> + clock-names = "apb_pclk";
>>> + resets = <&rcc SDMMC2_R>;
>>> + cap-sd-highspeed;
>>> + cap-mmc-highspeed;
>>> + max-frequency = <130000000>;
>>> + feature-domains = <&etzpc 51>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + usbphyc: usbphyc at 5a006000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + #clock-cells = <0>;
>>> + compatible = "st,stm32mp1-usbphyc";
>>> + reg = <0x5a006000 0x1000>;
>>> + clocks = <&rcc USBPHY_K>;
>>> + resets = <&rcc USBPHY_R>;
>>> + vdda1v1-supply = <®11>;
>>> + vdda1v8-supply = <®18>;
>>> + feature-domains = <&etzpc 5>;
>>> + status = "disabled";
>>> +
>>> + usbphyc_port0: usb-phy at 0 {
>>> + #phy-cells = <0>;
>>> + reg = <0>;
>>> + };
>>> +
>>> + usbphyc_port1: usb-phy at 1 {
>>> + #phy-cells = <1>;
>>> + reg = <1>;
>>> + };
>>> + };
>>> +
>>> + };
>>> +
>>> /*
>>> * Break node order to solve dependency probe issue between
>>> * pinctrl and exti.
>>> diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
>>> index df451c3c2a26..be6061552683 100644
>>> --- a/arch/arm/boot/dts/stm32mp133.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp133.dtsi
>>> @@ -33,35 +33,38 @@ m_can2: can at 4400f000 {
>>> bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
>>> status = "disabled";
>>> };
>>> + };
>>> +};
>>>
>>> - adc_1: adc at 48003000 {
>>> - compatible = "st,stm32mp13-adc-core";
>>> - reg = <0x48003000 0x400>;
>>> - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc ADC1>, <&rcc ADC1_K>;
>>> - clock-names = "bus", "adc";
>>> - interrupt-controller;
>>> - #interrupt-cells = <1>;
>>> +&etzpc {
>>> + adc_1: adc at 48003000 {
>>> + compatible = "st,stm32mp13-adc-core";
>>> + reg = <0x48003000 0x400>;
>>> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc ADC1>, <&rcc ADC1_K>;
>>> + clock-names = "bus", "adc";
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + feature-domains = <&etzpc 32>;
>>> + status = "disabled";
>>> +
>>> + adc1: adc at 0 {
>>> + compatible = "st,stm32mp13-adc";
>>> + #io-channel-cells = <1>;
>>> #address-cells = <1>;
>>> #size-cells = <0>;
>>> + reg = <0x0>;
>>> + interrupt-parent = <&adc_1>;
>>> + interrupts = <0>;
>>> + dmas = <&dmamux1 9 0x400 0x80000001>;
>>> + dma-names = "rx";
>>> status = "disabled";
>>>
>>> - adc1: adc at 0 {
>>> - compatible = "st,stm32mp13-adc";
>>> - #io-channel-cells = <1>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - reg = <0x0>;
>>> - interrupt-parent = <&adc_1>;
>>> - interrupts = <0>;
>>> - dmas = <&dmamux1 9 0x400 0x80000001>;
>>> - dma-names = "rx";
>>> - status = "disabled";
>>> -
>>> - channel at 18 {
>>> - reg = <18>;
>>> - label = "vrefint";
>>> - };
>>> + channel at 18 {
>>> + reg = <18>;
>>> + label = "vrefint";
>>> };
>>> };
>>> };
>>> diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
>>> index 4d00e7592882..a1a7a40c2a3e 100644
>>> --- a/arch/arm/boot/dts/stm32mp13xc.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
>>> @@ -4,15 +4,14 @@
>>> * Author: Alexandre Torgue <alexandre.torgue at foss.st.com> for STMicroelectronics.
>>> */
>>>
>>> -/ {
>>> - soc {
>>> - cryp: crypto at 54002000 {
>>> - compatible = "st,stm32mp1-cryp";
>>> - reg = <0x54002000 0x400>;
>>> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc CRYP1>;
>>> - resets = <&rcc CRYP1_R>;
>>> - status = "disabled";
>>> - };
>>> +&etzpc {
>>> + cryp: crypto at 54002000 {
>>> + compatible = "st,stm32mp1-cryp";
>>> + reg = <0x54002000 0x400>;
>>> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc CRYP1>;
>>> + resets = <&rcc CRYP1_R>;
>>> + feature-domains = <&etzpc 42>;
>>> + status = "disabled";
>>> };
>>> };
>>> diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
>>> index 4d00e7592882..b9fb071a1471 100644
>>> --- a/arch/arm/boot/dts/stm32mp13xf.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
>>> @@ -4,15 +4,13 @@
>>> * Author: Alexandre Torgue <alexandre.torgue at foss.st.com> for STMicroelectronics.
>>> */
>>>
>>> -/ {
>>> - soc {
>>> - cryp: crypto at 54002000 {
>>> - compatible = "st,stm32mp1-cryp";
>>> - reg = <0x54002000 0x400>;
>>> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&rcc CRYP1>;
>>> - resets = <&rcc CRYP1_R>;
>>> - status = "disabled";
>>> - };
>>> +&etzpc {
>>> + cryp: crypto at 54002000 {
>>> + compatible = "st,stm32mp1-cryp";
>>> + reg = <0x54002000 0x400>;
>>> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&rcc CRYP1>;
>>> + resets = <&rcc CRYP1_R>;
>>> + status = "disabled";
>>> };
>>> };
>>
>
Regarding the patch itself, I can separate it in two patches.
1)Introduce ETZPC
2)Move peripherals under ETZPC
Best regards,
Gatien
More information about the linux-phy
mailing list