[PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits

[Alain Volmat]

This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.

Signed-off-by: Alain Volmat <avolmat at me.com>
---
 drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
 1 file changed, 10 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5c..e30305b77f0d 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
 
 static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
 {
-	unsigned long finish = jiffies + 5 * HZ;
 	u8 val;
 
 	/* Waiting for Compensation to complete */
-	do {
-		val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
-		if (time_after_eq(jiffies, finish))
-			return -EBUSY;
-		cpu_relax();
-	} while (!(val & COMP_DONE));
-
-	return 0;
+	return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+					  val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
 }
 
 
@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
 
 static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
 {
-	unsigned long finish = jiffies + 5 * HZ;
 	u8 mask = HFC_PLL | HFC_RDY;
 	u8 val;
 
@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (miphy_phy->type == PHY_TYPE_SATA)
 		mask |= PHY_RDY;
 
-	do {
-		val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
-		if ((val & mask) != mask)
-			cpu_relax();
-		else
-			return 0;
-	} while (!time_after_eq(jiffies, finish));
-
-	return -EBUSY;
+	return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+					  val, (val & mask) == mask, 1,
+					  5 * USEC_PER_SEC);
 }
 
 static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 {
 	struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
-	unsigned long finish = jiffies + 5 * HZ;
 	u32 val;
 
 	if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
 	if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
 		return -EINVAL;
 
-	do {
-		regmap_read(miphy_dev->regmap,
-				miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
-		if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
-			cpu_relax();
-		else
-			return 0;
-	} while (!time_after_eq(jiffies, finish));
-
-	return -EBUSY;
+	return regmap_read_poll_timeout(miphy_dev->regmap,
+					miphy_phy->syscfg_reg[SYSCFG_STATUS],
+					val, val & MIPHY_OSC_RDY, 1,
+					5 * USEC_PER_SEC);
 }
 
 static int miphy28lp_get_resource_byname(struct device_node *child,
-- 
2.34.1