[Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
Ahmad Fatoum
a.fatoum at pengutronix.de
Wed Feb 8 23:46:20 PST 2023
Hello Gatien,
On 27.01.23 17:40, Gatien Chevallier wrote:
> The STM32 System Bus is an internal bus on which devices are connected.
> ETZPC is a peripheral overseeing the firewall bus that configures
> and control access to the peripherals connected on it.
>
> For more information on which peripheral is securable, please read
> the STM32MP13 reference manual.
Diff is way too big. Please split up the alphabetic reordering into its
own commit, so actual functional changes are apparent.
Thanks,
Ahmad
>
> Signed-off-by: Gatien Chevallier <gatien.chevallier at foss.st.com>
> ---
>
> No changes in V2.
>
> Changes in V3:
> -Use appriopriate node name: bus
>
> arch/arm/boot/dts/stm32mp131.dtsi | 407 +++++++++++++++--------------
> arch/arm/boot/dts/stm32mp133.dtsi | 51 ++--
> arch/arm/boot/dts/stm32mp13xc.dtsi | 19 +-
> arch/arm/boot/dts/stm32mp13xf.dtsi | 18 +-
> 4 files changed, 258 insertions(+), 237 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
> index accc3824f7e9..24462a647101 100644
> --- a/arch/arm/boot/dts/stm32mp131.dtsi
> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
> @@ -253,148 +253,6 @@ dmamux1: dma-router at 48002000 {
> dma-channels = <16>;
> };
>
> - adc_2: adc at 48004000 {
> - compatible = "st,stm32mp13-adc-core";
> - reg = <0x48004000 0x400>;
> - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc ADC2>, <&rcc ADC2_K>;
> - clock-names = "bus", "adc";
> - interrupt-controller;
> - #interrupt-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "disabled";
> -
> - adc2: adc at 0 {
> - compatible = "st,stm32mp13-adc";
> - #io-channel-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x0>;
> - interrupt-parent = <&adc_2>;
> - interrupts = <0>;
> - dmas = <&dmamux1 10 0x400 0x80000001>;
> - dma-names = "rx";
> - status = "disabled";
> -
> - channel at 13 {
> - reg = <13>;
> - label = "vrefint";
> - };
> - channel at 14 {
> - reg = <14>;
> - label = "vddcore";
> - };
> - channel at 16 {
> - reg = <16>;
> - label = "vddcpu";
> - };
> - channel at 17 {
> - reg = <17>;
> - label = "vddq_ddr";
> - };
> - };
> - };
> -
> - usbotg_hs: usb at 49000000 {
> - compatible = "st,stm32mp15-hsotg", "snps,dwc2";
> - reg = <0x49000000 0x40000>;
> - clocks = <&rcc USBO_K>;
> - clock-names = "otg";
> - resets = <&rcc USBO_R>;
> - reset-names = "dwc2";
> - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> - g-rx-fifo-size = <512>;
> - g-np-tx-fifo-size = <32>;
> - g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
> - dr_mode = "otg";
> - otg-rev = <0x200>;
> - usb33d-supply = <&usb33>;
> - status = "disabled";
> - };
> -
> - spi4: spi at 4c002000 {
> - compatible = "st,stm32h7-spi";
> - reg = <0x4c002000 0x400>;
> - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc SPI4_K>;
> - resets = <&rcc SPI4_R>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - dmas = <&dmamux1 83 0x400 0x01>,
> - <&dmamux1 84 0x400 0x01>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - spi5: spi at 4c003000 {
> - compatible = "st,stm32h7-spi";
> - reg = <0x4c003000 0x400>;
> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc SPI5_K>;
> - resets = <&rcc SPI5_R>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - dmas = <&dmamux1 85 0x400 0x01>,
> - <&dmamux1 86 0x400 0x01>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - i2c3: i2c at 4c004000 {
> - compatible = "st,stm32mp13-i2c";
> - reg = <0x4c004000 0x400>;
> - interrupt-names = "event", "error";
> - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc I2C3_K>;
> - resets = <&rcc I2C3_R>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - dmas = <&dmamux1 73 0x400 0x1>,
> - <&dmamux1 74 0x400 0x1>;
> - dma-names = "rx", "tx";
> - st,syscfg-fmp = <&syscfg 0x4 0x4>;
> - i2c-analog-filter;
> - status = "disabled";
> - };
> -
> - i2c4: i2c at 4c005000 {
> - compatible = "st,stm32mp13-i2c";
> - reg = <0x4c005000 0x400>;
> - interrupt-names = "event", "error";
> - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc I2C4_K>;
> - resets = <&rcc I2C4_R>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - dmas = <&dmamux1 75 0x400 0x1>,
> - <&dmamux1 76 0x400 0x1>;
> - dma-names = "rx", "tx";
> - st,syscfg-fmp = <&syscfg 0x4 0x8>;
> - i2c-analog-filter;
> - status = "disabled";
> - };
> -
> - i2c5: i2c at 4c006000 {
> - compatible = "st,stm32mp13-i2c";
> - reg = <0x4c006000 0x400>;
> - interrupt-names = "event", "error";
> - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc I2C5_K>;
> - resets = <&rcc I2C5_R>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - dmas = <&dmamux1 115 0x400 0x1>,
> - <&dmamux1 116 0x400 0x1>;
> - dma-names = "rx", "tx";
> - st,syscfg-fmp = <&syscfg 0x4 0x10>;
> - i2c-analog-filter;
> - status = "disabled";
> - };
> -
> rcc: rcc at 50000000 {
> compatible = "st,stm32mp13-rcc", "syscon";
> reg = <0x50000000 0x1000>;
> @@ -431,34 +289,6 @@ mdma: dma-controller at 58000000 {
> dma-requests = <48>;
> };
>
> - sdmmc1: mmc at 58005000 {
> - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> - arm,primecell-periphid = <0x20253180>;
> - reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
> - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc SDMMC1_K>;
> - clock-names = "apb_pclk";
> - resets = <&rcc SDMMC1_R>;
> - cap-sd-highspeed;
> - cap-mmc-highspeed;
> - max-frequency = <130000000>;
> - status = "disabled";
> - };
> -
> - sdmmc2: mmc at 58007000 {
> - compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> - arm,primecell-periphid = <0x20253180>;
> - reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
> - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc SDMMC2_K>;
> - clock-names = "apb_pclk";
> - resets = <&rcc SDMMC2_R>;
> - cap-sd-highspeed;
> - cap-mmc-highspeed;
> - max-frequency = <130000000>;
> - status = "disabled";
> - };
> -
> usbh_ohci: usb at 5800c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> @@ -486,29 +316,6 @@ iwdg2: watchdog at 5a002000 {
> status = "disabled";
> };
>
> - usbphyc: usbphyc at 5a006000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #clock-cells = <0>;
> - compatible = "st,stm32mp1-usbphyc";
> - reg = <0x5a006000 0x1000>;
> - clocks = <&rcc USBPHY_K>;
> - resets = <&rcc USBPHY_R>;
> - vdda1v1-supply = <®11>;
> - vdda1v8-supply = <®18>;
> - status = "disabled";
> -
> - usbphyc_port0: usb-phy at 0 {
> - #phy-cells = <0>;
> - reg = <0>;
> - };
> -
> - usbphyc_port1: usb-phy at 1 {
> - #phy-cells = <1>;
> - reg = <1>;
> - };
> - };
> -
> rtc: rtc at 5c004000 {
> compatible = "st,stm32mp1-rtc";
> reg = <0x5c004000 0x400>;
> @@ -536,6 +343,220 @@ ts_cal2: calib at 5e {
> };
> };
>
> + etzpc: bus at 5c007000 {
> + compatible = "st,stm32mp13-sys-bus";
> + reg = <0x5c007000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + feature-domain-controller;
> + #feature-domain-cells = <1>;
> + ranges;
> +
> + adc_2: adc at 48004000 {
> + compatible = "st,stm32mp13-adc-core";
> + reg = <0x48004000 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc ADC2>, <&rcc ADC2_K>;
> + clock-names = "bus", "adc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + feature-domains = <&etzpc 33>;
> + status = "disabled";
> +
> + adc2: adc at 0 {
> + compatible = "st,stm32mp13-adc";
> + #io-channel-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> + interrupt-parent = <&adc_2>;
> + interrupts = <0>;
> + dmas = <&dmamux1 10 0x400 0x80000001>;
> + dma-names = "rx";
> + status = "disabled";
> +
> + channel at 13 {
> + reg = <13>;
> + label = "vrefint";
> + };
> + channel at 14 {
> + reg = <14>;
> + label = "vddcore";
> + };
> + channel at 16 {
> + reg = <16>;
> + label = "vddcpu";
> + };
> + channel at 17 {
> + reg = <17>;
> + label = "vddq_ddr";
> + };
> + };
> + };
> +
> + usbotg_hs: usb at 49000000 {
> + compatible = "st,stm32mp15-hsotg", "snps,dwc2";
> + reg = <0x49000000 0x40000>;
> + clocks = <&rcc USBO_K>;
> + clock-names = "otg";
> + resets = <&rcc USBO_R>;
> + reset-names = "dwc2";
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + g-rx-fifo-size = <512>;
> + g-np-tx-fifo-size = <32>;
> + g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
> + dr_mode = "otg";
> + otg-rev = <0x200>;
> + usb33d-supply = <&usb33>;
> + feature-domains = <&etzpc 34>;
> + status = "disabled";
> + };
> +
> + spi4: spi at 4c002000 {
> + compatible = "st,stm32h7-spi";
> + reg = <0x4c002000 0x400>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc SPI4_K>;
> + resets = <&rcc SPI4_R>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dmamux1 83 0x400 0x01>,
> + <&dmamux1 84 0x400 0x01>;
> + dma-names = "rx", "tx";
> + feature-domains = <&etzpc 18>;
> + status = "disabled";
> + };
> +
> + spi5: spi at 4c003000 {
> + compatible = "st,stm32h7-spi";
> + reg = <0x4c003000 0x400>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc SPI5_K>;
> + resets = <&rcc SPI5_R>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dmamux1 85 0x400 0x01>,
> + <&dmamux1 86 0x400 0x01>;
> + dma-names = "rx", "tx";
> + feature-domains = <&etzpc 19>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at 4c004000 {
> + compatible = "st,stm32mp13-i2c";
> + reg = <0x4c004000 0x400>;
> + interrupt-names = "event", "error";
> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc I2C3_K>;
> + resets = <&rcc I2C3_R>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dmamux1 73 0x400 0x1>,
> + <&dmamux1 74 0x400 0x1>;
> + dma-names = "rx", "tx";
> + st,syscfg-fmp = <&syscfg 0x4 0x4>;
> + i2c-analog-filter;
> + feature-domains = <&etzpc 20>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c at 4c005000 {
> + compatible = "st,stm32mp13-i2c";
> + reg = <0x4c005000 0x400>;
> + interrupt-names = "event", "error";
> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc I2C4_K>;
> + resets = <&rcc I2C4_R>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dmamux1 75 0x400 0x1>,
> + <&dmamux1 76 0x400 0x1>;
> + dma-names = "rx", "tx";
> + st,syscfg-fmp = <&syscfg 0x4 0x8>;
> + i2c-analog-filter;
> + feature-domains = <&etzpc 21>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c at 4c006000 {
> + compatible = "st,stm32mp13-i2c";
> + reg = <0x4c006000 0x400>;
> + interrupt-names = "event", "error";
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc I2C5_K>;
> + resets = <&rcc I2C5_R>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dmamux1 115 0x400 0x1>,
> + <&dmamux1 116 0x400 0x1>;
> + dma-names = "rx", "tx";
> + st,syscfg-fmp = <&syscfg 0x4 0x10>;
> + i2c-analog-filter;
> + feature-domains = <&etzpc 22>;
> + status = "disabled";
> + };
> +
> + sdmmc1: mmc at 58005000 {
> + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> + arm,primecell-periphid = <0x20253180>;
> + reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc SDMMC1_K>;
> + clock-names = "apb_pclk";
> + resets = <&rcc SDMMC1_R>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <130000000>;
> + feature-domains = <&etzpc 50>;
> + status = "disabled";
> + };
> +
> + sdmmc2: mmc at 58007000 {
> + compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> + arm,primecell-periphid = <0x20253180>;
> + reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc SDMMC2_K>;
> + clock-names = "apb_pclk";
> + resets = <&rcc SDMMC2_R>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <130000000>;
> + feature-domains = <&etzpc 51>;
> + status = "disabled";
> + };
> +
> + usbphyc: usbphyc at 5a006000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <0>;
> + compatible = "st,stm32mp1-usbphyc";
> + reg = <0x5a006000 0x1000>;
> + clocks = <&rcc USBPHY_K>;
> + resets = <&rcc USBPHY_R>;
> + vdda1v1-supply = <®11>;
> + vdda1v8-supply = <®18>;
> + feature-domains = <&etzpc 5>;
> + status = "disabled";
> +
> + usbphyc_port0: usb-phy at 0 {
> + #phy-cells = <0>;
> + reg = <0>;
> + };
> +
> + usbphyc_port1: usb-phy at 1 {
> + #phy-cells = <1>;
> + reg = <1>;
> + };
> + };
> +
> + };
> +
> /*
> * Break node order to solve dependency probe issue between
> * pinctrl and exti.
> diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
> index df451c3c2a26..be6061552683 100644
> --- a/arch/arm/boot/dts/stm32mp133.dtsi
> +++ b/arch/arm/boot/dts/stm32mp133.dtsi
> @@ -33,35 +33,38 @@ m_can2: can at 4400f000 {
> bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
> status = "disabled";
> };
> + };
> +};
>
> - adc_1: adc at 48003000 {
> - compatible = "st,stm32mp13-adc-core";
> - reg = <0x48003000 0x400>;
> - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc ADC1>, <&rcc ADC1_K>;
> - clock-names = "bus", "adc";
> - interrupt-controller;
> - #interrupt-cells = <1>;
> +&etzpc {
> + adc_1: adc at 48003000 {
> + compatible = "st,stm32mp13-adc-core";
> + reg = <0x48003000 0x400>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc ADC1>, <&rcc ADC1_K>;
> + clock-names = "bus", "adc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + feature-domains = <&etzpc 32>;
> + status = "disabled";
> +
> + adc1: adc at 0 {
> + compatible = "st,stm32mp13-adc";
> + #io-channel-cells = <1>;
> #address-cells = <1>;
> #size-cells = <0>;
> + reg = <0x0>;
> + interrupt-parent = <&adc_1>;
> + interrupts = <0>;
> + dmas = <&dmamux1 9 0x400 0x80000001>;
> + dma-names = "rx";
> status = "disabled";
>
> - adc1: adc at 0 {
> - compatible = "st,stm32mp13-adc";
> - #io-channel-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x0>;
> - interrupt-parent = <&adc_1>;
> - interrupts = <0>;
> - dmas = <&dmamux1 9 0x400 0x80000001>;
> - dma-names = "rx";
> - status = "disabled";
> -
> - channel at 18 {
> - reg = <18>;
> - label = "vrefint";
> - };
> + channel at 18 {
> + reg = <18>;
> + label = "vrefint";
> };
> };
> };
> diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
> index 4d00e7592882..a1a7a40c2a3e 100644
> --- a/arch/arm/boot/dts/stm32mp13xc.dtsi
> +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
> @@ -4,15 +4,14 @@
> * Author: Alexandre Torgue <alexandre.torgue at foss.st.com> for STMicroelectronics.
> */
>
> -/ {
> - soc {
> - cryp: crypto at 54002000 {
> - compatible = "st,stm32mp1-cryp";
> - reg = <0x54002000 0x400>;
> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc CRYP1>;
> - resets = <&rcc CRYP1_R>;
> - status = "disabled";
> - };
> +&etzpc {
> + cryp: crypto at 54002000 {
> + compatible = "st,stm32mp1-cryp";
> + reg = <0x54002000 0x400>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc CRYP1>;
> + resets = <&rcc CRYP1_R>;
> + feature-domains = <&etzpc 42>;
> + status = "disabled";
> };
> };
> diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
> index 4d00e7592882..b9fb071a1471 100644
> --- a/arch/arm/boot/dts/stm32mp13xf.dtsi
> +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
> @@ -4,15 +4,13 @@
> * Author: Alexandre Torgue <alexandre.torgue at foss.st.com> for STMicroelectronics.
> */
>
> -/ {
> - soc {
> - cryp: crypto at 54002000 {
> - compatible = "st,stm32mp1-cryp";
> - reg = <0x54002000 0x400>;
> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&rcc CRYP1>;
> - resets = <&rcc CRYP1_R>;
> - status = "disabled";
> - };
> +&etzpc {
> + cryp: crypto at 54002000 {
> + compatible = "st,stm32mp1-cryp";
> + reg = <0x54002000 0x400>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc CRYP1>;
> + resets = <&rcc CRYP1_R>;
> + status = "disabled";
> };
> };
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-phy
mailing list