[PATCH v4 7/7] arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node

[Abel Vesa]

Add the PMIC eUSB2 repeater node and add the usb-repeater
property to the eUSB2 PHY to allow it to be controlled by the
PHY driver.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---

The v3 (rfc) is here:
https://lore.kernel.org/all/20230202133816.4026990-8-abel.vesa@linaro.org/

Changes since v3:
 * Dropped the phy-names property from usb_1_hsphy, like Dmitry suggested

 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 56aab7cafcbc..6b6ec0fe5e5e 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -457,6 +457,11 @@ sdc2_card_det_n: sdc2-card-det-state {
 	};
 };
 
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -563,6 +568,8 @@ &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&pm8550b_eusb2_repeater>;
+
 	status = "okay";
 };
 
-- 
2.34.1