[PATCH v4 0/7] sm8550: Add support for eUSB2 repeater
Abel Vesa
abel.vesa at linaro.org
Tue Feb 7 05:55:44 PST 2023
This patchset adds support for the eUSB2 repeater found in pmic PM8550B,
used along with SM8550. Since there is no dedicated generic framework
for eUSB2 repeaters, the most appropriate subsystem to model it is the
generic phy. This patchset also adds support for such repeater to the
eUSB2 PHY found in SM8550. Basically, the eUSB2 PHY will have its own
"phy" which is actually a repeater.
This patchset is based on the following patchset:
https://lore.kernel.org/all/20230207114024.944314-1-abel.vesa@linaro.org
Changes since v3:
* This time is a normal patchset, rather than an RFC
* reversed the order of patches 1 and 2, in order to make the repeater
schema available for the pmic schema update
Changes since v2:
* moved the bindings qcom,spmi-pmic patch before the repeater schema
patch in order to avoid the repeater schema validation failure due to
phy pattern property not being found in qcom,spmi-pmic schema
Changes since v1:
* the repeater driver is implemented now as a PHY rather than adding
a new generic framework for USB repeaters
Abel Vesa (5):
dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
dt-bindings: mfd: qcom,spmi-pmic: Add pattern property for phy
dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the
repeater
phy: qcom: Add QCOM SNPS eUSB2 repeater driver
arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node
Neil Armstrong (2):
phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
arm64: dts: qcom: pm8550b: Add eUSB2 repeater node
.../bindings/mfd/qcom,spmi-pmic.yaml | 4 +
.../bindings/phy/qcom,snps-eusb2-phy.yaml | 5 +
.../phy/qcom,snps-eusb2-repeater.yaml | 48 ++++
arch/arm64/boot/dts/qcom/pm8550b.dtsi | 6 +
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 7 +
drivers/phy/qualcomm/Kconfig | 9 +
drivers/phy/qualcomm/Makefile | 1 +
.../phy/qualcomm/phy-qcom-eusb2-repeater.c | 259 ++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c | 19 +-
9 files changed, 357 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
create mode 100644 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
--
2.34.1
More information about the linux-phy
mailing list