[PATCH v8 10/11] PCI: qcom: Add SM8550 PCIe support

[Abel Vesa]

Add compatible for both PCIe found on SM8550.
Also add the noc_aggr and cnoc_sf_axi clocks needed by the SM8550.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani at kernel.org>
---

The v7 of this patchset is:
https://lore.kernel.org/all/20230203081807.2248625-11-abel.vesa@linaro.org/

Changes since v7:
 * Mentioned the noc_aggr clock in the commit message as well, while
   using the cnoc_sf_axi instead of cnoc_pcie_sf_axi

Changes since v6:
 * none

Changes since v5:
 * none

Changes since v4:
 * added Mani's R-b tag

Changes since v3:
 * renamed cnoc_pcie_sf_axi to cnoc_sf_axi

Changes since v2:
 * none

Changes since v1:
 * changed the subject line prefix for the patch to match the history,
   like Bjorn Helgaas suggested.
 * added Konrad's R-b tag

 drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a232b04af048..6a70c9c6f98d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -182,10 +182,10 @@ struct qcom_pcie_resources_2_3_3 {
 
 /* 6 clocks typically, 7 for sm8250 */
 struct qcom_pcie_resources_2_7_0 {
-	struct clk_bulk_data clks[12];
+	struct clk_bulk_data clks[14];
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
-	struct reset_control *pci_reset;
+	struct reset_control *rst;
 };
 
 struct qcom_pcie_resources_2_9_0 {
@@ -1177,9 +1177,9 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	unsigned int idx;
 	int ret;
 
-	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
-	if (IS_ERR(res->pci_reset))
-		return PTR_ERR(res->pci_reset);
+	res->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(res->rst))
+		return PTR_ERR(res->rst);
 
 	res->supplies[0].supply = "vdda";
 	res->supplies[1].supply = "vddpe-3v3";
@@ -1205,9 +1205,11 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	res->clks[idx++].id = "ddrss_sf_tbu";
 	res->clks[idx++].id = "aggre0";
 	res->clks[idx++].id = "aggre1";
+	res->clks[idx++].id = "noc_aggr";
 	res->clks[idx++].id = "noc_aggr_4";
 	res->clks[idx++].id = "noc_aggr_south_sf";
 	res->clks[idx++].id = "cnoc_qx";
+	res->clks[idx++].id = "cnoc_sf_axi";
 
 	num_opt_clks = idx - num_clks;
 	res->num_clks = idx;
@@ -1237,17 +1239,17 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		goto err_disable_regulators;
 
-	ret = reset_control_assert(res->pci_reset);
-	if (ret < 0) {
-		dev_err(dev, "cannot assert pci reset\n");
+	ret = reset_control_assert(res->rst);
+	if (ret) {
+		dev_err(dev, "reset assert failed (%d)\n", ret);
 		goto err_disable_clocks;
 	}
 
 	usleep_range(1000, 1500);
 
-	ret = reset_control_deassert(res->pci_reset);
-	if (ret < 0) {
-		dev_err(dev, "cannot deassert pci reset\n");
+	ret = reset_control_deassert(res->rst);
+	if (ret) {
+		dev_err(dev, "reset deassert failed (%d)\n", ret);
 		goto err_disable_clocks;
 	}
 
@@ -1841,6 +1843,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-sm8350", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
+	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
 	{ }
 };
 
-- 
2.34.1