[PATCH v8 05/11] phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
Abel Vesa
abel.vesa at linaro.org
Mon Feb 6 13:26:13 PST 2023
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
The v7 of this patch is:
https://lore.kernel.org/all/20230203081807.2248625-6-abel.vesa@linaro.org/
Changes since v7:
* none
Changes since v6:
* none
Changes since v5:
* none
Changes since v4:
* none
Changes since v3:
* added Dmitry's R-b tag
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 1 +
.../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h | 23 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 05b59f261999..907f3f236f05 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -30,6 +30,7 @@
#include "phy-qcom-qmp-pcs-pcie-v5.h"
#include "phy-qcom-qmp-pcs-pcie-v5_20.h"
#include "phy-qcom-qmp-pcs-pcie-v6.h"
+#include "phy-qcom-qmp-pcs-pcie-v6_20.h"
#include "phy-qcom-qmp-pcie-qhp.h"
/* QPHY_SW_RESET bit */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
new file mode 100644
index 000000000000..e3eb08776339
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
+
+/* Only for QMP V6_20 PHY - PCIE have different offsets than V5 */
+#define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2 0x00c
+#define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG 0x018
+#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE 0x01c
+#define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS 0x090
+#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1 0x0a0
+#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5 0x108
+#define QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN 0x15c
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1 0x17c
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3 0x184
+#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5 0x18c
+#define QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5 0x1ac
+#define QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5 0x1c0
+
+#endif
--
2.34.1
More information about the linux-phy
mailing list