[RFC v3 2/7] dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
Rob Herring
robh at kernel.org
Thu Feb 2 07:03:31 PST 2023
On Thu, 02 Feb 2023 15:38:11 +0200, Abel Vesa wrote:
> The SM8550 SoC uses Synopsis eUSB2 repeater found in PM8550b.
> Add a dt-binding schema for the new driver.
>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
> .../phy/qcom,snps-eusb2-repeater.yaml | 48 +++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.example.dtb: pmic at 7: compatible:0: 'qcom,pm8550' is not one of ['qcom,pm6125', 'qcom,pm6150', 'qcom,pm6150l', 'qcom,pm6350', 'qcom,pm660', 'qcom,pm660l', 'qcom,pm7250b', 'qcom,pm7325', 'qcom,pm8004', 'qcom,pm8005', 'qcom,pm8009', 'qcom,pm8019', 'qcom,pm8028', 'qcom,pm8110', 'qcom,pm8150', 'qcom,pm8150b', 'qcom,pm8150c', 'qcom,pm8150l', 'qcom,pm8226', 'qcom,pm8350', 'qcom,pm8350b', 'qcom,pm8350c', 'qcom,pm8841', 'qcom,pm8909', 'qcom,pm8916', 'qcom,pm8941', 'qcom,pm8950', 'qcom,pm8953', 'qcom,pm8994', 'qcom,pm8998', 'qcom,pma8084', 'qcom,pmd9635', 'qcom,pmi8950', 'qcom,pmi8962', 'qcom,pmi8994', 'qcom,pmi8998', 'qcom,pmk8002', 'qcom,pmk8350', 'qcom,pmm8155au', 'qcom,pmp8074', 'qcom,pmr735a', 'qcom,pmr735b', 'qcom,pms405', 'qcom,pmx55', 'qcom,pmx65', 'qcom,smb2351']
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.example.dtb: pmic at 7: 'phy at fd00' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$'
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.example.dtb: /example-0/pmic at 7: failed to match any schema with compatible: ['qcom,pm8550', 'qcom,spmi-pmic']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230202133816.4026990-3-abel.vesa@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
More information about the linux-phy
mailing list