[RFC v3 7/7] arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node

[Abel Vesa]

Add the PMIC eUSB2 repeater node and add the usb-repeater
property to the eUSB2 PHY to allow it to be controlled by the
PHY driver.

Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 03862132fe41..9aaddafa0088 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -456,6 +456,11 @@ sdc2_card_det_n: sdc2-card-det-state {
 	};
 };
 
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -562,6 +567,9 @@ &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&pm8550b_eusb2_repeater>;
+	phy-names = "eusb2-repeater";
+
 	status = "okay";
 };
 
-- 
2.34.1