[PATCH v3 0/8] Add UFS support for SC7180/SM7125

[David Wronek]

This patchset introduces UFS support for SC7180 and SM7125, as well as
support for the Xiaomi Redmi Note 9S.

Signed-off-by: David Wronek <davidwronek at gmail.com>

---
Changes in v3:
 - Use SM7150 UFS PHY compatible as a fallback
 - Fix dts style issues
 - Add regulator-allow-set-load and allowed-modes to UFS regulators

Changes in v2:
 - Fix device tree binding for QMP PHY
 - Separate ICE into its own node
 - Fix style problems in sc7180.dtsi

---
David Wronek (7):
  dt-bindings: crypto: ice: Document SC7180 inline crypto engine
  dt-bindings: ufs: qcom: Add SC7180 compatible string
  dt-bindings: phy: Add QMP UFS PHY compatible for SC7180
  dt-bindings: arm: qcom: Add Xiaomi Redmi Note 9S
  phy: qcom: qmp-ufs: Add SC7180 support
  arm64: dts: qcom: sc7180: Add UFS nodes
  arm64: dts: qcom: sm7125-xiaomi-common: Add UFS nodes

Joe Mason (1):
  arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S

 .../devicetree/bindings/arm/qcom.yaml         |  1 +
 .../crypto/qcom,inline-crypto-engine.yaml     |  1 +
 .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml        |  2 +
 .../devicetree/bindings/ufs/qcom,ufs.yaml     |  2 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 70 +++++++++++++++++++
 .../boot/dts/qcom/sm7125-xiaomi-common.dtsi   | 28 ++++++++
 .../boot/dts/qcom/sm7125-xiaomi-curtana.dts   | 16 +++++
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       |  3 +
 9 files changed, 124 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts

-- 
2.43.0