[PATCH v2 2/3] phy: qcom: qmp-pcie: Add QMP v6 registers layout
Abel Vesa
abel.vesa at linaro.org
Sat Dec 23 03:55:22 PST 2023
For consistency, add the QMP v6 registers layout even though
they are the same as v5. Also switch all QMP v6 PHYs to use this
new layout.
Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 2af7115ef968..03a4898a7e6f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -116,6 +116,13 @@ static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
};
+static const unsigned int pciephy_v6_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
+};
+
static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
@@ -2936,7 +2943,7 @@ static const struct qmp_phy_cfg sdx65_qmp_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = pciephy_v5_regs_layout,
+ .regs = pciephy_v6_regs_layout,
.pwrdn_ctrl = SW_PWRDN,
.phy_status = PHYSTATUS_4_20,
@@ -3069,7 +3076,7 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = sm8550_qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
- .regs = pciephy_v5_regs_layout,
+ .regs = pciephy_v6_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
@@ -3099,7 +3106,7 @@ static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = sm8550_qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
- .regs = pciephy_v5_regs_layout,
+ .regs = pciephy_v6_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
--
2.34.1
More information about the linux-phy
mailing list