[RFC PATCH 1/2] phy: ti: gmii-sel: Enable SGMII mode for J784S4

[Chintan Vankar]

TI's J784S4 SoC supports SGMII mode with the CPSW9G instance of the CPSW
Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the
corresponding extra_modes member.

Signed-off-by: Chintan Vankar <c-vankar at ti.com>
---
 drivers/phy/ti/phy-gmii-sel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index bc847d3879f7..0f4818adb440 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -248,7 +248,7 @@ static const
 struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j784s4 = {
 	.use_of_data = true,
 	.regfields = phy_gmii_sel_fields_am654,
-	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) |
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII) |
 		       BIT(PHY_INTERFACE_MODE_USXGMII),
 	.num_ports = 8,
 	.num_qsgmii_main_ports = 2,
-- 
2.34.1