[PATCH 08/10] pci: qcom: Add support for IPQ5332

[Dmitry Baryshkov]

On Thu, 14 Dec 2023 at 08:30, Praveenkumar I <quic_ipkumar at quicinc.com> wrote:
>
> The Qualcomm IPQ5332 PCIe controller instances are based on
> SNPS core 5.90a with Gen3 Single-lane and Dual-lane support.
> The Qualcomm IP rev is 1.27.0 and hence using the 1_27_0 ops.
>
> Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> ---
> This patch depends on the below series which adds PCIe support in
> Qualcomm IPQ9574
> https://lore.kernel.org/all/20230519090219.15925-1-quic_devipriy@quicinc.com/

The series did not receive updates since the end of May. Should we
expect the next iteration of that series? Otherwise depending on it
sounds like a dead end.

>
>  drivers/pci/controller/dwc/pcie-qcom.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 109df587234e..3d54de1a71df 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1642,6 +1642,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>         { .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
>         { .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
>         { .compatible = "qcom,pcie-ipq4019", .data = &cfg_2_4_0 },
> +       { .compatible = "qcom,pcie-ipq5332", .data = &cfg_1_27_0 },
>         { .compatible = "qcom,pcie-ipq6018", .data = &cfg_2_9_0 },
>         { .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
>         { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
> --
> 2.34.1
>
>


-- 
With best wishes
Dmitry