[PATCH 04/10] phy: qcom: Add support for Pipe clock rate from device data

[Praveenkumar I]

Qualcomm IPQ5332 has the same PCIe UNIPHY PHY with different pipe
clock rate. Add support to define the pipe clock rate in device
data.

Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
---
This patch depends on the below series which adds PCIe support in
Qualcomm IPQ5018
https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/

 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
index 5ef6ae7276cf..9f9a03faf6fa 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
@@ -54,6 +54,7 @@ struct uniphy_pcie_data {
 	unsigned int phy_type;
 	const struct uniphy_regs *init_seq;
 	unsigned int init_seq_num;
+	unsigned int pipe_clk_rate;
 };
 
 struct qcom_uniphy_pcie {
@@ -117,6 +118,7 @@ static const struct uniphy_pcie_data ipq5018_2x2_data = {
 	.phy_type	= PHY_TYPE_PCIE_GEN2,
 	.init_seq	= ipq5018_regs,
 	.init_seq_num	= ARRAY_SIZE(ipq5018_regs),
+	.pipe_clk_rate	= 125000000,
 };
 
 static void qcom_uniphy_pcie_init(struct qcom_uniphy_pcie *phy)
@@ -232,6 +234,7 @@ static int qcom_uniphy_pcie_get_resources(struct platform_device *pdev,
 static int phy_pipe_clk_register(struct qcom_uniphy_pcie  *phy,
 				 struct device_node *np)
 {
+	const struct uniphy_pcie_data *data = phy->data;
 	struct clk_fixed_rate *fixed;
 	struct clk_init_data init = { };
 	int ret;
@@ -247,7 +250,7 @@ static int phy_pipe_clk_register(struct qcom_uniphy_pcie  *phy,
 		return -ENOMEM;
 
 	init.ops = &clk_fixed_rate_ops;
-	fixed->fixed_rate = 125000000;
+	fixed->fixed_rate = data->pipe_clk_rate;
 	fixed->hw.init = &init;
 
 	ret = devm_clk_hw_register(phy->dev, &fixed->hw);
-- 
2.34.1