[PATCH v2 2/2] phy: qcom: edp: Add X1E80100 eDP and DP PHYs

Abel Vesa abel.vesa at linaro.org
Mon Dec 4 07:01:37 PST 2023


The Qualcomm X1E80100 platform has a number of eDP and DP PHY instances,
add support for these.

Co-developed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 230 +++++++++++++++++++++++++++++++++---
 1 file changed, 212 insertions(+), 18 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 8e5078304646..702d49c18044 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -23,6 +23,11 @@
 
 #include "phy-qcom-qmp.h"
 
+enum {
+	QSERDES_V4,
+	QSERDES_V6,
+};
+
 /* EDP_PHY registers */
 #define DP_PHY_CFG                              0x0010
 #define DP_PHY_CFG_1                            0x0014
@@ -70,6 +75,7 @@
 
 struct qcom_edp_cfg {
 	bool is_dp;
+	int qserdes_version;
 
 	/* DP PHY swing and pre_emphasis tables */
 	const u8 (*swing_hbr_rbr)[4][4];
@@ -94,7 +100,7 @@ struct qcom_edp {
 
 	struct phy_configure_opts_dp dp_opts;
 
-	struct clk_bulk_data clks[2];
+	struct clk_bulk_data clks[3];
 	struct regulator_bulk_data supplies[2];
 };
 
@@ -126,8 +132,18 @@ static const u8 dp_pre_emp_hbr2_hbr3[4][4] = {
 	{ 0x04, 0xff, 0xff, 0xff }
 };
 
-static const struct qcom_edp_cfg dp_phy_cfg = {
+static const struct qcom_edp_cfg dp_v4_phy_cfg = {
+	.is_dp = true,
+	.qserdes_version = QSERDES_V4,
+	.swing_hbr_rbr = &dp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
+};
+
+static const struct qcom_edp_cfg dp_v6_phy_cfg = {
 	.is_dp = true,
+	.qserdes_version = QSERDES_V6,
 	.swing_hbr_rbr = &dp_swing_hbr_rbr,
 	.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
 	.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr,
@@ -162,8 +178,18 @@ static const u8 edp_pre_emp_hbr2_hbr3[4][4] = {
 	{ 0x00, 0xff, 0xff, 0xff }
 };
 
-static const struct qcom_edp_cfg edp_phy_cfg = {
+static const struct qcom_edp_cfg edp_v4_phy_cfg = {
+	.is_dp = false,
+	.qserdes_version = QSERDES_V4,
+	.swing_hbr_rbr = &edp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
+};
+
+static const struct qcom_edp_cfg edp_v6_phy_cfg = {
 	.is_dp = false,
+	.qserdes_version = QSERDES_V6,
 	.swing_hbr_rbr = &edp_swing_hbr_rbr,
 	.swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3,
 	.pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr,
@@ -190,7 +216,10 @@ static int qcom_edp_phy_init(struct phy *phy)
 	       edp->edp + DP_PHY_PD_CTL);
 
 	/* Turn on BIAS current for PHY/PLL */
-	writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+	if (cfg->qserdes_version == QSERDES_V6)
+		writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+	else
+		writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
 
 	writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
 	msleep(20);
@@ -261,7 +290,10 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
 	if (swing == 0xff || emph == 0xff)
 		return -EINVAL;
 
-	ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+	if (cfg->qserdes_version == QSERDES_V6)
+		ldo_config = 0x91;
+	else
+		ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
 
 	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
 	writel(swing, edp->tx0 + TXn_TX_DRV_LVL);
@@ -288,7 +320,7 @@ static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opt
 	return ret;
 }
 
-static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
+static int qcom_edp_configure_ssc_v4(const struct qcom_edp *edp)
 {
 	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
 	u32 step1;
@@ -322,7 +354,41 @@ static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
 	return 0;
 }
 
-static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+static int qcom_edp_configure_ssc_v6(const struct qcom_edp *edp)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 step1;
+	u32 step2;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+	case 2700:
+	case 8100:
+		step1 = 0x92;
+		step2 = 0x01;
+		break;
+
+	case 5400:
+		step1 = 0x18;
+		step2 = 0x02;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(0x01, edp->pll + QSERDES_V6_COM_SSC_EN_CENTER);
+	writel(0x00, edp->pll + QSERDES_V6_COM_SSC_ADJ_PER1);
+	writel(0x6b, edp->pll + QSERDES_V6_COM_SSC_PER1);
+	writel(0x02, edp->pll + QSERDES_V6_COM_SSC_PER2);
+	writel(step1, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0);
+	writel(step2, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0);
+
+	return 0;
+}
+
+static int qcom_edp_configure_pll_v4(const struct qcom_edp *edp)
 {
 	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
 	u32 div_frac_start2_mode0;
@@ -349,6 +415,7 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
 		div_frac_start3_mode0 = 0x07;
 		lock_cmp1_mode0 = 0x0f;
 		lock_cmp2_mode0 = 0x0e;
+
 		break;
 
 	case 5400:
@@ -358,6 +425,7 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
 		div_frac_start3_mode0 = 0x0a;
 		lock_cmp1_mode0 = 0x1f;
 		lock_cmp2_mode0 = 0x1c;
+
 		break;
 
 	case 8100:
@@ -367,6 +435,7 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
 		div_frac_start3_mode0 = 0x07;
 		lock_cmp1_mode0 = 0x2f;
 		lock_cmp2_mode0 = 0x2a;
+
 		break;
 
 	default:
@@ -408,6 +477,103 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
 	return 0;
 }
 
+static int qcom_edp_configure_pll_v6(const struct qcom_edp *edp)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 div_frac_start2_mode0;
+	u32 div_frac_start3_mode0;
+	u32 dec_start_mode0;
+	u32 lock_cmp1_mode0;
+	u32 lock_cmp2_mode0;
+	u32 code1_mode0;
+	u32 code2_mode0;
+	u32 hsclk_sel;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+		hsclk_sel = 0x5;
+		dec_start_mode0 = 0x34;
+		div_frac_start2_mode0 = 0xc0;
+		div_frac_start3_mode0 = 0x0b;
+		lock_cmp1_mode0 = 0x37;
+		lock_cmp2_mode0 = 0x04;
+		code1_mode0 = 0x71;
+		code2_mode0 = 0x0C;
+		break;
+
+	case 2700:
+		hsclk_sel = 0x3;
+		dec_start_mode0 = 0x34;
+		div_frac_start2_mode0 = 0xc0;
+		div_frac_start3_mode0 = 0x0b;
+		lock_cmp1_mode0 = 0x07;
+		lock_cmp2_mode0 = 0x07;
+		code1_mode0 = 0x71;
+		code2_mode0 = 0x0C;
+		break;
+
+	case 5400:
+		hsclk_sel = 0x1;
+		dec_start_mode0 = 0x46;
+		div_frac_start2_mode0 = 0x00;
+		div_frac_start3_mode0 = 0x05;
+		lock_cmp1_mode0 = 0x0f;
+		lock_cmp2_mode0 = 0x0e;
+		code1_mode0 = 0x97;
+		code2_mode0 = 0x10;
+		break;
+
+	case 8100:
+		hsclk_sel = 0x0;
+		dec_start_mode0 = 0x34;
+		div_frac_start2_mode0 = 0xc0;
+		div_frac_start3_mode0 = 0x0b;
+		lock_cmp1_mode0 = 0x17;
+		lock_cmp2_mode0 = 0x15;
+		code1_mode0 = 0x71;
+		code2_mode0 = 0x0C;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(0x01, edp->pll + QSERDES_V6_COM_SVS_MODE_CLK_SEL);
+	writel(0x0b, edp->pll + QSERDES_V6_COM_SYSCLK_EN_SEL);
+	writel(0x02, edp->pll + QSERDES_V6_COM_SYS_CLK_CTRL);
+	writel(0x0c, edp->pll + QSERDES_V6_COM_CLK_ENABLE1);
+	writel(0x06, edp->pll + QSERDES_V6_COM_SYSCLK_BUF_ENABLE);
+	writel(0x30, edp->pll + QSERDES_V6_COM_CLK_SELECT);
+	writel(hsclk_sel, edp->pll + QSERDES_V6_COM_HSCLK_SEL_1);
+	writel(0x07, edp->pll + QSERDES_V6_COM_PLL_IVCO);
+	writel(0x08, edp->pll + QSERDES_V6_COM_LOCK_CMP_EN);
+	writel(0x36, edp->pll + QSERDES_V6_COM_PLL_CCTRL_MODE0);
+	writel(0x16, edp->pll + QSERDES_V6_COM_PLL_RCTRL_MODE0);
+	writel(0x6, edp->pll + QSERDES_V6_COM_CP_CTRL_MODE0);
+	writel(dec_start_mode0, edp->pll + QSERDES_V6_COM_DEC_START_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_DIV_FRAC_START1_MODE0);
+	writel(div_frac_start2_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START2_MODE0);
+	writel(div_frac_start3_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START3_MODE0);
+	writel(0x12, edp->pll + QSERDES_V6_COM_CMN_CONFIG_1);
+	writel(0x3f, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_MAP);
+	writel(lock_cmp1_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP1_MODE0);
+	writel(lock_cmp2_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP2_MODE0);
+
+	writel(0x0a, edp->pll + QSERDES_V6_COM_BG_TIMER);
+	writel(0x14, edp->pll + QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_CTRL);
+	writel(0x17, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+	writel(0x0f, edp->pll + QSERDES_V6_COM_CORE_CLK_EN);
+
+	writel(code1_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0);
+	writel(code2_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0);
+
+	return 0;
+}
+
 static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
 {
 	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
@@ -462,13 +628,22 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	       edp->edp + DP_PHY_PD_CTL);
 	writel(0xfc, edp->edp + DP_PHY_MODE);
 
-	timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
-				     val, val & BIT(7), 5, 200);
+	if (cfg->qserdes_version == QSERDES_V6) {
+		timeout = readl_poll_timeout(edp->pll + QSERDES_V6_COM_CMN_STATUS,
+					     val, val & BIT(7), 5, 200);
+	} else {
+		timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
+					     val, val & BIT(7), 5, 200);
+	}
+
 	if (timeout)
 		return timeout;
 
 
-	ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+	if (cfg->qserdes_version == QSERDES_V6)
+		ldo_config = 0x91;
+	else
+		ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
 
 	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
 	writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
@@ -476,12 +651,20 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
 
 	if (edp->dp_opts.ssc) {
-		ret = qcom_edp_configure_ssc(edp);
+		if (cfg->qserdes_version == QSERDES_V6)
+			ret = qcom_edp_configure_ssc_v6(edp);
+		else
+			ret = qcom_edp_configure_ssc_v4(edp);
+
 		if (ret)
 			return ret;
 	}
 
-	ret = qcom_edp_configure_pll(edp);
+	if (cfg->qserdes_version == QSERDES_V6)
+		ret = qcom_edp_configure_pll_v6(edp);
+	else
+		ret = qcom_edp_configure_pll_v4(edp);
+
 	if (ret)
 		return ret;
 
@@ -512,10 +695,18 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	writel(0x01, edp->edp + DP_PHY_CFG);
 	writel(0x09, edp->edp + DP_PHY_CFG);
 
-	writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+	if (cfg->qserdes_version == QSERDES_V6) {
+		writel(0x20, edp->pll + QSERDES_V6_COM_RESETSM_CNTRL);
+
+		timeout = readl_poll_timeout(edp->pll + QSERDES_V6_COM_C_READY_STATUS,
+					     val, val & BIT(0), 500, 10000);
+	} else {
+		writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+
+		timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
+					     val, val & BIT(0), 500, 10000);
+	}
 
-	timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
-				     val, val & BIT(0), 500, 10000);
 	if (timeout)
 		return timeout;
 
@@ -744,7 +935,6 @@ static int qcom_edp_clks_register(struct qcom_edp *edp, struct device_node *np)
 	data = devm_kzalloc(edp->dev, struct_size(data, hws, 2), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-	data->num = 2;
 
 	snprintf(name, sizeof(name), "%s::link_clk", dev_name(edp->dev));
 	init.ops = &qcom_edp_dp_link_clk_ops;
@@ -764,6 +954,7 @@ static int qcom_edp_clks_register(struct qcom_edp *edp, struct device_node *np)
 
 	data->hws[0] = &edp->dp_link_hw;
 	data->hws[1] = &edp->dp_pixel_hw;
+	data->num = 2;
 
 	return devm_of_clk_add_hw_provider(edp->dev, of_clk_hw_onecell_get, data);
 }
@@ -806,6 +997,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 
 	edp->supplies[0].supply = "vdda-phy";
 	edp->supplies[1].supply = "vdda-pll";
+	edp->clks[2].id = "tcsr";
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
 	if (ret)
 		return ret;
@@ -841,8 +1033,10 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 static const struct of_device_id qcom_edp_phy_match_table[] = {
 	{ .compatible = "qcom,sc7280-edp-phy" },
 	{ .compatible = "qcom,sc8180x-edp-phy" },
-	{ .compatible = "qcom,sc8280xp-dp-phy", .data = &dp_phy_cfg },
-	{ .compatible = "qcom,sc8280xp-edp-phy", .data = &edp_phy_cfg },
+	{ .compatible = "qcom,sc8280xp-dp-phy", .data = &dp_v4_phy_cfg },
+	{ .compatible = "qcom,sc8280xp-edp-phy", .data = &edp_v4_phy_cfg },
+	{ .compatible = "qcom,x1e80100-dp-phy", .data = &dp_v6_phy_cfg },
+	{ .compatible = "qcom,x1e80100-edp-phy", .data = &edp_v6_phy_cfg },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table);

-- 
2.34.1




More information about the linux-phy mailing list