[PATCH v2 05/12] phy: qcom-qmp-ufs: rework regs layout arrays

[Dmitry Baryshkov]

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h |  5 +++++
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h |  3 +++
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c        | 18 +++++++++---------
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h
index af870669a904..a0803a8783d2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h
@@ -6,6 +6,9 @@
 #ifndef QCOM_PHY_QMP_PCS_UFS_V2_H_
 #define QCOM_PHY_QMP_PCS_UFS_V2_H_
 
+#define QPHY_V2_PCS_UFS_PHY_START			0x000
+#define QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL		0x004
+
 #define QPHY_V2_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x034
 #define QPHY_V2_PCS_UFS_TX_LARGE_AMP_POST_EMP_LVL	0x038
 #define QPHY_V2_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x03c
@@ -17,4 +20,6 @@
 #define QPHY_V2_PCS_UFS_RX_SIGDET_CTRL2			0x148
 #define QPHY_V2_PCS_UFS_RX_PWM_GEAR_BAND			0x154
 
+#define QPHY_V2_PCS_UFS_READY_STATUS			0x168
+
 #endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h
index ba1ea29d2884..adea13c3a9e6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h
@@ -6,12 +6,15 @@
 #ifndef QCOM_PHY_QMP_PCS_UFS_V3_H_
 #define QCOM_PHY_QMP_PCS_UFS_V3_H_
 
+#define QPHY_V3_PCS_UFS_PHY_START			0x000
+#define QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL		0x004
 #define QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x02c
 #define QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x034
 #define QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL		0x134
 #define QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME		0x138
 #define QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1			0x13c
 #define QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2			0x140
+#define QPHY_V3_PCS_UFS_READY_STATUS			0x160
 #define QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1		0x1bc
 #define QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1		0x1c4
 
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index d447d68ea817..c4d0bc9e6e83 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -87,21 +87,21 @@ enum qphy_reg_layout {
 };
 
 static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_START_CTRL]		= 0x00,
-	[QPHY_PCS_READY_STATUS]		= 0x168,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_START_CTRL]		= QPHY_V2_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V2_PCS_UFS_READY_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_START_CTRL]		= 0x00,
-	[QPHY_PCS_READY_STATUS]		= 0x160,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_START_CTRL]		= QPHY_V3_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V3_PCS_UFS_READY_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_START_CTRL]		= 0x00,
-	[QPHY_PCS_READY_STATUS]		= 0x168,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_START_CTRL]		= QPHY_V2_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V2_PCS_UFS_READY_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-- 
2.35.1