[PATCH 11/18] phy: qcom-qmp-ufs: rename regs layout arrays

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed Sep 28 16:10:07 PDT 2022


Rename regs layouts to follow the QMP PHY version.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 .../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h    |  4 +++
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       | 31 ++++++++++---------
 2 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
index bcca23493b7e..43255e8bf038 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
@@ -8,6 +8,9 @@
 #define QCOM_PHY_QMP_PCS_UFS_V5_H_
 
 /* Only for QMP V5 PHY - UFS PCS registers */
+#define QPHY_V5_PCS_UFS_PHY_START			0x000
+#define QPHY_V5_PCS_UFS_POWER_DOWN_CONTROL		0x004
+#define QPHY_V5_PCS_UFS_SW_RESET			0x008
 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
 #define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
@@ -21,6 +24,7 @@
 #define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2			0x158
 #define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND		0x160
 #define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND			0x168
+#define QPHY_V5_PCS_UFS_READY_STATUS			0x180
 #define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
 #define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
 
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 72cae70d0507..593173167b8a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -86,31 +86,32 @@ enum qphy_reg_layout {
 	QPHY_LAYOUT_SIZE
 };
 
-static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+static const unsigned int ufsphy_v2_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= QPHY_V2_PCS_UFS_PHY_START,
 	[QPHY_PCS_READY_STATUS]		= QPHY_V2_PCS_UFS_READY_STATUS,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
-static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+static const unsigned int ufsphy_v3_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= QPHY_V3_PCS_UFS_PHY_START,
 	[QPHY_PCS_READY_STATUS]		= QPHY_V3_PCS_UFS_READY_STATUS,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
-static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_START_CTRL]		= QPHY_V2_PCS_UFS_PHY_START,
-	[QPHY_PCS_READY_STATUS]		= QPHY_V2_PCS_UFS_READY_STATUS,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL,
-};
-
-static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+static const unsigned int ufsphy_v4_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= QPHY_V4_PCS_UFS_PHY_START,
 	[QPHY_PCS_READY_STATUS]		= QPHY_V4_PCS_UFS_READY_STATUS,
 	[QPHY_SW_RESET]			= QPHY_V4_PCS_UFS_SW_RESET,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
+static const unsigned int ufsphy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_START_CTRL]		= QPHY_V5_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V5_PCS_UFS_READY_STATUS,
+	[QPHY_SW_RESET]			= QPHY_V5_PCS_UFS_SW_RESET,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V5_PCS_UFS_POWER_DOWN_CONTROL,
+};
+
 static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
@@ -677,7 +678,7 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 
-	.regs			= msm8996_ufsphy_regs_layout,
+	.regs			= ufsphy_v2_regs_layout,
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -701,7 +702,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sdm845_ufsphy_regs_layout,
+	.regs			= ufsphy_v3_regs_layout,
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -725,7 +726,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sm6115_ufsphy_regs_layout,
+	.regs			= ufsphy_v2_regs_layout,
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -748,7 +749,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sm8150_ufsphy_regs_layout,
+	.regs			= ufsphy_v4_regs_layout,
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -770,7 +771,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sm8150_ufsphy_regs_layout,
+	.regs			= ufsphy_v5_regs_layout,
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -792,7 +793,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
 	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sm8150_ufsphy_regs_layout,
+	.regs			= ufsphy_v5_regs_layout,
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-- 
2.35.1




More information about the linux-phy mailing list