[PATCH 05/13] phy: qcom-qmp-pcie: unify sdm845 registers
Neil Armstrong
neil.armstrong at linaro.org
Wed Sep 28 09:03:06 PDT 2022
On 28/09/2022 18:01, Neil Armstrong wrote:
> On 28/09/2022 17:28, Johan Hovold wrote:
>> The SDM845 register array is identical to pciephy_regs_layout so drop
>> the former.
>>
>> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
>> ---
>> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 8 +-------
>> 1 file changed, 1 insertion(+), 7 deletions(-)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>> index 7b3f7e42edd5..4146545fdf5f 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>> @@ -92,12 +92,6 @@ static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
>> [QPHY_PCS_STATUS] = 0x174,
>> };
>> -static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
>> - [QPHY_SW_RESET] = 0x00,
>> - [QPHY_START_CTRL] = 0x08,
>> - [QPHY_PCS_STATUS] = 0x174,
>> -};
>> -
>> static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
>> [QPHY_SW_RESET] = 0x00,
>> [QPHY_START_CTRL] = 0x08,
>> @@ -1545,7 +1539,7 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
>> .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
>> .vreg_list = qmp_phy_vreg_l,
>> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
>> - .regs = sdm845_qmp_pciephy_regs_layout,
>> + .regs = pciephy_regs_layout,
>> .start_ctrl = PCS_START | SERDES_START,
>> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
>
> Isn't is an issue if QPHY_COM_* entries are in pciephy_regs_layout and not in sdm845_qmp_pciephy_regs_layout ?
>
> BTW it seems those QPHY_COM_* are never used..
Forget this comment, I missed patch 3 removing them...
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
>
> Neil
More information about the linux-phy
mailing list