[PATCH V2 9/9] PCI: tegra194: Calibrate P2U for endpoint mode

[Vidya Sagar]

Calibrate P2U for endpoint to request UPHY PLL rate change to Gen1 during
initialization.

Signed-off-by: Vidya Sagar <vidyas at nvidia.com>
---
V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 3e4868ab8416..cfe32a98b2f3 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1078,6 +1078,9 @@ static int tegra_pcie_enable_phy(struct tegra_pcie_dw *pcie)
 		ret = phy_power_on(pcie->phys[i]);
 		if (ret < 0)
 			goto phy_exit;
+
+		if (pcie->of_data->mode == DW_PCIE_EP_TYPE)
+			phy_calibrate(pcie->phys[i]);
 	}
 
 	return 0;
-- 
2.17.1