[PATCH v2 4/8] dt-bindings: net: renesas: Document Renesas Ethernet Switch
Yoshihiro Shimoda
yoshihiro.shimoda.uh at renesas.com
Sun Sep 25 23:10:25 PDT 2022
Hi Krzysztof,
> From: Krzysztof Kozlowski, Sent: Thursday, September 22, 2022 4:37 PM
>
> On 21/09/2022 10:47, Yoshihiro Shimoda wrote:
> > Document Renesas Etherent Switch for R-Car S4-8 (r8a779f0).
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
> > ---
> > .../bindings/net/renesas,etherswitch.yaml | 286 ++++++++++++++++++
> > 1 file changed, 286 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/renesas,etherswitch.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/renesas,etherswitch.yaml
> b/Documentation/devicetree/bindings/net/renesas,etherswitch.yaml
> > new file mode 100644
> > index 000000000000..988d14f5c54e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/renesas,etherswitch.yaml
>
> Isn't dsa directory for this?
As Andrew mentioned, this is not a DSA driver.
> > @@ -0,0 +1,286 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/renesas,etherswitch.yaml#
>
> Filename: renesas,r8a779f0-ether-switch.yaml
I'll rename this file.
> > +$schema:
<snip>
> > +
> > +title: Renesas Ethernet Switch
> > +
> > +maintainers:
> > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
> > +
> > +properties:
> > + compatible:
> > + const: renesas,r8a779f0-ether-switch
> > +
> > + reg:
> > + maxItems: 2
> > +
> > + reg-names:
> > + items:
> > + - const: base
> > + - const: secure_base
> > +
> > + interrupts:
> > + maxItems: 47
> > +
> > + interrupt-names:
> > + items:
> > + - const: mfwd_error
> > + - const: race_error
> > + - const: coma_error
> > + - const: gwca0_error
> > + - const: gwca1_error
> > + - const: etha0_error
> > + - const: etha1_error
> > + - const: etha2_error
> > + - const: gptp0_status
> > + - const: gptp1_status
> > + - const: mfwd_status
> > + - const: race_status
> > + - const: coma_status
> > + - const: gwca0_status
> > + - const: gwca1_status
> > + - const: etha0_status
> > + - const: etha1_status
> > + - const: etha2_status
> > + - const: rmac0_status
> > + - const: rmac1_status
> > + - const: rmac2_status
> > + - const: gwca0_rxtx0
> > + - const: gwca0_rxtx1
> > + - const: gwca0_rxtx2
> > + - const: gwca0_rxtx3
> > + - const: gwca0_rxtx4
> > + - const: gwca0_rxtx5
> > + - const: gwca0_rxtx6
> > + - const: gwca0_rxtx7
> > + - const: gwca1_rxtx0
> > + - const: gwca1_rxtx1
> > + - const: gwca1_rxtx2
> > + - const: gwca1_rxtx3
> > + - const: gwca1_rxtx4
> > + - const: gwca1_rxtx5
> > + - const: gwca1_rxtx6
> > + - const: gwca1_rxtx7
> > + - const: gwca0_rxts0
> > + - const: gwca0_rxts1
> > + - const: gwca1_rxts0
> > + - const: gwca1_rxts1
> > + - const: rmac0_mdio
> > + - const: rmac1_mdio
> > + - const: rmac2_mdio
> > + - const: rmac0_phy
> > + - const: rmac1_phy
> > + - const: rmac2_phy
> > +
> > + clocks:
> > + maxItems: 2
> > +
> > + clock-names:
> > + items:
> > + - const: fck
> > + - const: tsn
> > +
> > + resets:
> > + maxItems: 2
> > +
> > + reset-names:
> > + items:
> > + - const: rswitch2
> > + - const: tsn
> > +
> > + iommus:
> > + maxItems: 16
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + ethernet-ports:
> > + type: object
> > +
> > + properties:
> > + '#address-cells':
> > + description: Port number of ETHA (TSNA).
> > + const: 1
>
> Blank line
I'll add a blank line here.
> > + '#size-cells':
> > + const: 0
> > +
> > + additionalProperties: false
>
> Don't put it between properties. For nested object usually this is
> before properties:
I'll drop it.
> > +
> > + patternProperties:
> > + "^port@[0-9a-f]+$":
> > + type: object
> > +
>
> Skip blank line.
I got it.
> > + $ref: "/schemas/net/ethernet-controller.yaml#"
>
> No need for quotes.
I'll drop the quotes.
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + reg:
> > + description:
> > + Port number of ETHA (TSNA).
> > +
> > + phy-handle:
> > + description:
> > + Phandle of an Ethernet PHY.
>
> Why do you need to mention this property? Isn't it coming from
> ethernet-controller.yaml?
Indeed. I'll drop the description.
> > +
> > + phy-mode:
> > + description:
> > + This specifies the interface used by the Ethernet PHY.
> > + enum:
> > + - mii
> > + - sgmii
> > + - usxgmii
> > +
> > + phys:
> > + maxItems: 1
> > + description:
> > + Phandle of an Ethernet SERDES.
>
> This is getting confusing. You have now:
> - phy-handle
> - phy
> - phy-device
> - phys
> in one schema... although lan966x serdes seems to do the same. :/
Yes... I found the following documents have "phy" and "phy-handle" by using
git grep -l -w "phys" `git grep -l phy-handle Documentation/devicetree/bindings/`:
Documentation/devicetree/bindings/net/cdns,macb.yaml
Documentation/devicetree/bindings/net/cpsw.txt
Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
Documentation/devicetree/bindings/phy/phy-bindings.txt
And I'm interesting that the phy-bindings.txt said the following:
-----
phys : the phandle for the PHY device (used by the PHY subsystem; not to be
confused with the Ethernet specific 'phy' and 'phy-handle' properties,
see Documentation/devicetree/bindings/net/ethernet.txt for these)
-----
> > +
> > + mdio:
> > + $ref: "/schemas/net/mdio.yaml#"
>
> No need for quotes.
I got it.
> Are you sure this is property of each port? I don't
> know the net/ethernet bindings that good, so I need to ask sometimes
> basic questions. Other bindings seem to do it differently a bit.
Yes, each port has mdio bus.
> > + unevaluatedProperties: false
> > +
> > + required:
> > + - phy-handle
> > + - phy-mode
> > + - phys
> > + - mdio
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-names
> > + - interrupts
> > + - interrupt-names
> > + - clocks
> > + - clock-names
> > + - resets
> > + - power-domains
> > + - ethernet-ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/power/r8a779f0-sysc.h>
> > +
> > + ethernet at e6880000 {
> > + compatible = "renesas,r8a779f0-ether-switch";
>
> Wrong indentation. Use 4 spaces.
I'll fix it.
Best regards,
Yoshihiro Shimoda
> > + reg = <0xe6880000 0x20000>, <0xe68c0000 0x20000>;
> > + reg-names = "base", "secure_base";
> > + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
> Best regards,
> Krzysztof
More information about the linux-phy
mailing list