[PATCH v6 2/8] dt-bindings: phy: Add Lynx 10G phy binding

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Sep 22 09:00:55 PDT 2022


On 20/09/2022 22:23, Sean Anderson wrote:
> This adds a binding for the SerDes module found on QorIQ processors.
> Each phy is a subnode of the top-level device, possibly supporting
> multiple lanes and protocols. This "thick" #phy-cells is used due to
> allow for better organization of parameters. Note that the particular
> parameters necessary to select a protocol-controller/lane combination
> vary across different SoCs, and even within different SerDes on the same
> SoC.
> 
> The driver is designed to be able to completely reconfigure lanes at
> runtime. Generally, the phy consumer can select the appropriate
> protocol using set_mode.
> 
> There are two PLLs, each of which can be used as the master clock for
> each lane. Each PLL has its own reference. For the moment they are
> required, because it simplifies the driver implementation. Absent
> reference clocks can be modeled by a fixed-clock with a rate of 0.
> 
> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---
> 
> Changes in v6:
> - fsl,type -> phy-type
> 
> Changes in v4:
> - Use subnodes to describe lane configuration, instead of describing
>   PCCRs. This is the same style used by phy-cadence-sierra et al.
> 
> Changes in v3:
> - Manually expand yaml references
> - Add mode configuration to device tree
> 
> Changes in v2:
> - Rename to fsl,lynx-10g.yaml
> - Refer to the device in the documentation, rather than the binding
> - Move compatible first
> - Document phy cells in the description
> - Allow a value of 1 for phy-cells. This allows for compatibility with
>   the similar (but according to Ioana Ciornei different enough) lynx-28g
>   binding.
> - Remove minItems
> - Use list for clock-names
> - Fix example binding having too many cells in regs
> - Add #clock-cells. This will allow using assigned-clocks* to configure
>   the PLLs.
> - Document the structure of the compatible strings
> 
>  .../devicetree/bindings/phy/fsl,lynx-10g.yaml | 236 ++++++++++++++++++
>  1 file changed, 236 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
> new file mode 100644
> index 000000000000..ce9afdbf33f4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
> @@ -0,0 +1,236 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,lynx-10g.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Lynx 10G SerDes
> +
> +maintainers:
> +  - Sean Anderson <sean.anderson at seco.com>
> +
> +description: |
> +  These Lynx "SerDes" devices are found in NXP's QorIQ line of processors. The
> +  SerDes provides up to eight lanes. Each lane may be configured individually,
> +  or may be combined with adjacent lanes for a multi-lane protocol. The SerDes
> +  supports a variety of protocols, including up to 10G Ethernet, PCIe, SATA, and
> +  others. The specific protocols supported for each lane depend on the
> +  particular SoC.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,ls1046a-serdes
> +          - fsl,ls1088a-serdes
> +      - const: fsl,lynx-10g
> +
> +  "#address-cells":

If there is going to be resend, use only one type of quotes: ' or ".

FWIW (Rob's reviewed it):

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Best regards,
Krzysztof




More information about the linux-phy mailing list