[PATCH 0/7] arm64: sunxi: h616: Add USB support

[Karl Kurbjun]

On 09/12, Andre Przywara wrote:
<snip>
> Please have a look and test on your hardware, especically on all ports
> exposed on header pins of the OrangePi Zero2 board.

I tested this patch set on an OrangePi Zero 2 with each of the USB ports:

Port 0: I tested this with a UART gadget to make sure I could access a console over the port.
Ports 1-3: I tested these with a USB memory stick - I was able to see the device and mount a partition.

As would be expected: for ports 2-3 I had to enable the ohci and ehci entries in the target dts file to test them.

Tested-By: Karl Kurbjun <karl.os at veroson.com>

Karl