[PATCH 16/17] phy: qcom-qmp-usb: consolidate lane config
Neil Armstrong
neil.armstrong at linaro.org
Tue Sep 20 06:52:19 PDT 2022
On 20/09/2022 09:38, Johan Hovold wrote:
> For legacy reasons, there are two configuration parameters that appear
> to describe the number of lanes a PHY has, even if "nlanes" was actually
> used for a different purpose.
>
> Replace them both with a new field simply named "lanes".
>
> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 52 ++++++++++---------------
> 1 file changed, 20 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> index a34320738f60..f01b3022a10d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> @@ -1429,8 +1429,7 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> struct qmp_phy_cfg {
> - /* number of lanes provided by phy */
> - int nlanes;
> + int lanes;
>
> /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> const struct qmp_phy_init_tbl *serdes_tbl;
> @@ -1470,8 +1469,6 @@ struct qmp_phy_cfg {
>
> /* true, if PHY has a separate DP_COM control block */
> bool has_phy_dp_com_ctrl;
> - /* true, if PHY has secondary tx/rx lanes to be configured */
> - bool is_dual_lane_phy;
>
> /* Offset from PCS to PCS_USB region */
> unsigned int pcs_usb_offset;
> @@ -1603,7 +1600,7 @@ static const char * const qmp_phy_vreg_l[] = {
> };
>
> static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = ipq8074_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
> @@ -1627,7 +1624,7 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> };
>
> static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = msm8996_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(msm8996_usb3_serdes_tbl),
> @@ -1651,7 +1648,7 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> };
>
> static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> @@ -1678,11 +1675,10 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>
> .has_phy_dp_com_ctrl = true,
> - .is_dual_lane_phy = true,
> };
>
> static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> @@ -1709,11 +1705,10 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>
> .has_phy_dp_com_ctrl = true,
> - .is_dual_lane_phy = true,
> };
>
> static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_serdes_tbl),
> @@ -1741,7 +1736,7 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl),
> @@ -1769,7 +1764,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = msm8998_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> @@ -1790,12 +1785,10 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN,
> .phy_status = PHYSTATUS,
> -
> - .is_dual_lane_phy = true,
> };
>
> static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> @@ -1826,11 +1819,10 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>
> .has_phy_dp_com_ctrl = true,
> - .is_dual_lane_phy = true,
> };
>
> static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> @@ -1861,7 +1853,7 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> @@ -1891,11 +1883,10 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>
> .has_phy_dp_com_ctrl = true,
> - .is_dual_lane_phy = true,
> };
>
> static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> @@ -1926,7 +1917,7 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> @@ -1957,7 +1948,7 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> @@ -1988,7 +1979,7 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
> @@ -2018,11 +2009,10 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>
> .has_phy_dp_com_ctrl = true,
> - .is_dual_lane_phy = true,
> };
>
> static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> - .nlanes = 1,
> + .lanes = 1,
>
> .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> @@ -2053,7 +2043,7 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> };
>
> static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> - .nlanes = 1,
> + .lanes = 2,
>
> .serdes_tbl = qcm2290_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> @@ -2074,8 +2064,6 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN,
> .phy_status = PHYSTATUS,
> -
> - .is_dual_lane_phy = true,
> };
>
> static void qmp_usb_configure_lane(void __iomem *base,
> @@ -2232,14 +2220,14 @@ static int qmp_usb_power_on(struct phy *phy)
> /* Tx, Rx, and PCS configurations */
> qmp_usb_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1);
>
> - if (cfg->is_dual_lane_phy) {
> + if (cfg->lanes >= 2) {
> qmp_usb_configure_lane(qphy->tx2, cfg->regs,
> cfg->tx_tbl, cfg->tx_tbl_num, 2);
> }
>
> qmp_usb_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1);
>
> - if (cfg->is_dual_lane_phy) {
> + if (cfg->lanes >= 2) {
> qmp_usb_configure_lane(qphy->rx2, cfg->regs,
> cfg->rx_tbl, cfg->rx_tbl_num, 2);
> }
> @@ -2613,7 +2601,7 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id,
> if (cfg->pcs_usb_offset)
> qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
>
> - if (cfg->is_dual_lane_phy) {
> + if (cfg->lanes >= 2) {
> qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
> if (IS_ERR(qphy->tx2))
> return PTR_ERR(qphy->tx2);
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the linux-phy
mailing list