[PATCH] phy: xilinx: phy-zynqmp: dynamic clock support for power-save
Vinod Koul
vkoul at kernel.org
Tue Sep 20 04:49:37 PDT 2022
On 20-09-22, 10:38, Mehta, Piyush wrote:
> Hello @Vinod Koul,
>
> Thanks for review comments.
> Please find my inline comments below with tag [Piyush].
Please _do_ _not_ _top_ _post_
And learn how to reply upstream. Am sure there at people at AMD/Xilinx
who know this..
>
> Regards,
> Piyush Mehta
>
> > -----Original Message-----
> > From: Vinod Koul <vkoul at kernel.org>
> > Sent: Tuesday, September 20, 2022 12:11 PM
> > To: Mehta, Piyush <piyush.mehta at amd.com>
> > Cc: laurent.pinchart at ideasonboard.com; kishon at ti.com;
> > michal.simek at xilinx.com; Simek, Michal <michal.simek at amd.com>; linux-
> > kernel at vger.kernel.org; linux-phy at lists.infradead.org; linux-arm-
> > kernel at lists.infradead.org; git (AMD-Xilinx) <git at amd.com>; Paladugu, Siva
> > Durga Prasad <siva.durga.prasad.paladugu at amd.com>
> > Subject: Re: [PATCH] phy: xilinx: phy-zynqmp: dynamic clock support for
> > power-save
> >
> > On 09-09-22, 18:34, Piyush Mehta wrote:
> > > Enabling clock for all the lanes, consuming power even PHY is active
> > > or not.
> >
> > Pls consider revision to:
> > Enabling clock for all the lanes consumes power even PHY is active or idle..
> [Piyush]: will address in next version of patch.
>
> >
> > >
> > > To resolve the above issue and power saving,made clock
> > > enabled/disabled based on active PHYs on call of phy_init/phy_exit.
> >
> > To resolve this, enable/disable clocks in phy_init/phy_exit
> [Piyush]: will address in next version of patch.
>
> >
> > > By default clock is disabled for all the lanes. Whenever phy_init
> > > called from USB, SATA, SGMII, or display driver, it enabled the
> > > required clock for requested lane. On phy_exit cycle, it disabled
> > > clock for the active PHYs.
> > >
> > > During the suspend/resume cycle, each USB/ SATA/ SGMII/ display driver
> > > called phy_exit/phy_init individually. it disabled clock on exit, and
> > > enabled on initialization for the active PHYs.
> > >
> > > Active PHY configuration depends on the peripheral DT node status,
> > > like USB DT node status 'okay' then driver enabled clock for the USB
> > > configured lane.
> > >
> > > Signed-off-by: Piyush Mehta <piyush.mehta at amd.com>
> > > ---
> > > drivers/phy/xilinx/phy-zynqmp.c | 59
> > > ++++++++-------------------------
> > > 1 file changed, 14 insertions(+), 45 deletions(-)
> > >
> > > diff --git a/drivers/phy/xilinx/phy-zynqmp.c
> > > b/drivers/phy/xilinx/phy-zynqmp.c index 9be9535ad7ab..912c4defdf8d
> > > 100644
> > > --- a/drivers/phy/xilinx/phy-zynqmp.c
> > > +++ b/drivers/phy/xilinx/phy-zynqmp.c
> > > @@ -572,6 +572,10 @@ static int xpsgtr_phy_init(struct phy *phy)
> > >
> > > mutex_lock(>r_dev->gtr_mutex);
> > >
> > > + /* Configure and enable the clock when peripheral phy_init call */
> >
> > when peripheral invokes phy_init
> >
> > > + if (clk_prepare_enable(gtr_dev->clk[gtr_phy->lane]))
> > > + goto out;
> > > +
> > > /* Skip initialization if not required. */
> > > if (!xpsgtr_phy_init_required(gtr_phy))
> > > goto out;
> > > @@ -616,9 +620,13 @@ static int xpsgtr_phy_init(struct phy *phy)
> > > static int xpsgtr_phy_exit(struct phy *phy) {
> > > struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> > > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > >
> > > gtr_phy->skip_phy_init = false;
> > >
> > > + /* Ensure that disable clock only, which configure for lane */
> > > + clk_disable_unprepare(gtr_dev->clk[gtr_phy->lane]);
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -824,15 +832,11 @@ static struct phy *xpsgtr_xlate(struct device
> > > *dev, static int __maybe_unused xpsgtr_suspend(struct device *dev) {
> > > struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> > > - unsigned int i;
> > >
> > > /* Save the snapshot ICM_CFG registers. */
> > > gtr_dev->saved_icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
> > > gtr_dev->saved_icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
> > >
> > > - for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++)
> > > - clk_disable_unprepare(gtr_dev->clk[i]);
> > > -
> > > return 0;
> > > }
> > >
> > > @@ -842,13 +846,6 @@ static int __maybe_unused xpsgtr_resume(struct
> > device *dev)
> > > unsigned int icm_cfg0, icm_cfg1;
> > > unsigned int i;
> > > bool skip_phy_init;
> > > - int err;
> > > -
> > > - for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++) {
> > > - err = clk_prepare_enable(gtr_dev->clk[i]);
> > > - if (err)
> > > - goto err_clk_put;
> > > - }
> >
> > hold on, why is this being removed from suspend/resume?
>
>
> [Piyush]:
> Now, each peripheral driver calls phy_exit/phy_init in suspend/resume, and respective active driver will do clock enable and disable.
>
> In above xpsgtr resume calls, by default all the clock enabled for all the lanes, that consumes power even PHY is active or not.
> So, the clock will be enabled only for active PHY in the phy_init and disabled in phy_exit. Clock enabling is not required at multiple times.
Learn to use a proper Linux MUA while replying on mail lists
on you comment:
1. leaving clock on all the time does not sound right to me
2. why not enable pm_runtime for this driver and do better with power
3. Changes need to be documented in changelog, this was not explained in
log so unexpected
>
> >
> > >
> > > icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
> > > icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1); @@ -869,12 +866,6
> > @@
> > > static int __maybe_unused xpsgtr_resume(struct device *dev)
> > > gtr_dev->phys[i].skip_phy_init = skip_phy_init;
> > >
> > > return 0;
> > > -
> > > -err_clk_put:
> > > - while (i--)
> > > - clk_disable_unprepare(gtr_dev->clk[i]);
> > > -
> > > - return err;
> > > }
> > >
> > > static const struct dev_pm_ops xpsgtr_pm_ops = { @@ -888,7 +879,6 @@
> > > static const struct dev_pm_ops xpsgtr_pm_ops = { static int
> > > xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev) {
> > > unsigned int refclk;
> > > - int ret;
> > >
> > > for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) {
> > > unsigned long rate;
> > > @@ -899,19 +889,14 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev
> > *gtr_dev)
> > > snprintf(name, sizeof(name), "ref%u", refclk);
> > > clk = devm_clk_get_optional(gtr_dev->dev, name);
> > > if (IS_ERR(clk)) {
> > > - ret = dev_err_probe(gtr_dev->dev, PTR_ERR(clk),
> > > - "Failed to get reference clock
> > %u\n",
> > > - refclk);
> > > - goto err_clk_put;
> > > + return dev_err_probe(gtr_dev->dev, PTR_ERR(clk),
> > > + "Failed to get ref clock %u\n",
> > > + refclk);
> > > }
> > >
> > > if (!clk)
> > > continue;
> > >
> > > - ret = clk_prepare_enable(clk);
> > > - if (ret)
> > > - goto err_clk_put;
> > > -
> > > gtr_dev->clk[refclk] = clk;
> > >
> > > /*
> > > @@ -931,18 +916,11 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev
> > *gtr_dev)
> > > dev_err(gtr_dev->dev,
> > > "Invalid rate %lu for reference clock %u\n",
> > > rate, refclk);
> > > - ret = -EINVAL;
> > > - goto err_clk_put;
> > > + return -EINVAL;
> > > }
> > > }
> > >
> > > return 0;
> > > -
> > > -err_clk_put:
> > > - while (refclk--)
> > > - clk_disable_unprepare(gtr_dev->clk[refclk]);
> > > -
> > > - return ret;
> > > }
> > >
> > > static int xpsgtr_probe(struct platform_device *pdev) @@ -951,7
> > > +929,6 @@ static int xpsgtr_probe(struct platform_device *pdev)
> > > struct xpsgtr_dev *gtr_dev;
> > > struct phy_provider *provider;
> > > unsigned int port;
> > > - unsigned int i;
> > > int ret;
> > >
> > > gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL);
> > @@
> > > -991,8 +968,7 @@ static int xpsgtr_probe(struct platform_device *pdev)
> > > phy = devm_phy_create(&pdev->dev, np, &xpsgtr_phyops);
> > > if (IS_ERR(phy)) {
> > > dev_err(&pdev->dev, "failed to create PHY\n");
> > > - ret = PTR_ERR(phy);
> > > - goto err_clk_put;
> > > + return PTR_ERR(phy);
> > > }
> > >
> > > gtr_phy->phy = phy;
> > > @@ -1003,16 +979,9 @@ static int xpsgtr_probe(struct platform_device
> > *pdev)
> > > provider = devm_of_phy_provider_register(&pdev->dev,
> > xpsgtr_xlate);
> > > if (IS_ERR(provider)) {
> > > dev_err(&pdev->dev, "registering provider failed\n");
> > > - ret = PTR_ERR(provider);
> > > - goto err_clk_put;
> > > + return PTR_ERR(provider);
> > > }
> > > return 0;
> > > -
> > > -err_clk_put:
> > > - for (i = 0; i < ARRAY_SIZE(gtr_dev->clk); i++)
> > > - clk_disable_unprepare(gtr_dev->clk[i]);
> > > -
> > > - return ret;
> > > }
> > >
> > > static const struct of_device_id xpsgtr_of_match[] = {
> > > --
> > > 2.25.1
> >
> > --
> > ~Vinod
--
~Vinod
More information about the linux-phy
mailing list