[PATCH 02/18] phy: mediatek: tphy: remove macros to prepare bitfield value
Chunfeng Yun
chunfeng.yun at mediatek.com
Tue Sep 20 02:00:22 PDT 2022
Prefer to make use of FIELD_PREP() macro to prepare bitfield value,
then no need local ones anymore.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 193 ++++++++++------------------
1 file changed, 67 insertions(+), 126 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cc10298bc70d..e906a82791bd 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -49,37 +49,28 @@
#define U3P_USBPHYACR0 0x000
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
#define PA0_USB20_PLL_PREDIV GENMASK(7, 6)
-#define PA0_USB20_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6)
#define PA0_RG_USB20_INTR_EN BIT(5)
#define U3P_USBPHYACR1 0x004
#define PA1_RG_INTR_CAL GENMASK(23, 19)
-#define PA1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19)
#define PA1_RG_VRT_SEL GENMASK(14, 12)
-#define PA1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12)
#define PA1_RG_TERM_SEL GENMASK(10, 8)
-#define PA1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8)
#define U3P_USBPHYACR2 0x008
#define PA2_RG_U2PLL_BW GENMASK(21, 19)
-#define PA2_RG_U2PLL_BW_VAL(x) ((0x7 & (x)) << 19)
#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
#define U3P_USBPHYACR5 0x014
#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
-#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
#define U3P_USBPHYACR6 0x018
#define PA6_RG_U2_PRE_EMP GENMASK(31, 30)
-#define PA6_RG_U2_PRE_EMP_VAL(x) ((0x3 & (x)) << 30)
#define PA6_RG_U2_BC11_SW_EN BIT(23)
#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
#define PA6_RG_U2_DISCTH GENMASK(7, 4)
-#define PA6_RG_U2_DISCTH_VAL(x) ((0xf & (x)) << 4)
#define PA6_RG_U2_SQTH GENMASK(3, 0)
-#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
#define U3P_U2PHYACR4 0x020
#define P2C_RG_USB20_GPIO_CTL BIT(9)
@@ -106,11 +97,9 @@
#define P2C_FORCE_SUSPENDM BIT(18)
#define P2C_FORCE_TERMSEL BIT(17)
#define P2C_RG_DATAIN GENMASK(13, 10)
-#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
#define P2C_RG_DMPULLDOWN BIT(7)
#define P2C_RG_DPPULLDOWN BIT(6)
#define P2C_RG_XCVRSEL GENMASK(5, 4)
-#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
#define P2C_RG_SUSPENDM BIT(3)
#define P2C_RG_TERMSEL BIT(2)
#define P2C_DTM0_PART_MASK \
@@ -141,87 +130,65 @@
#define U3P_U3_PHYA_REG0 0x000
#define P3A_RG_IEXT_INTR GENMASK(15, 10)
-#define P3A_RG_IEXT_INTR_VAL(x) ((0x3f & (x)) << 10)
#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
-#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
#define U3P_U3_PHYA_REG1 0x004
#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
-#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
#define U3P_U3_PHYA_REG6 0x018
#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
-#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
#define U3P_U3_PHYA_REG9 0x024
#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
-#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
#define U3P_U3_PHYA_DA_REG0 0x100
#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
-#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
-#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12)
#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
-#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
#define U3P_U3_PHYA_DA_REG4 0x108
#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
-#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6)
#define U3P_U3_PHYA_DA_REG5 0x10c
#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
-#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28)
#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
-#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12)
#define U3P_U3_PHYA_DA_REG6 0x110
#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
-#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16)
#define U3P_U3_PHYA_DA_REG7 0x114
#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
-#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16)
#define U3P_U3_PHYA_DA_REG20 0x13c
#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
-#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16)
#define U3P_U3_PHYA_DA_REG25 0x148
#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
-#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
#define U3P_U3_PHYD_LFPS1 0x00c
#define P3D_RG_FWAKE_TH GENMASK(21, 16)
-#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
#define U3P_U3_PHYD_IMPCAL0 0x010
#define P3D_RG_FORCE_TX_IMPEL BIT(31)
#define P3D_RG_TX_IMPEL GENMASK(28, 24)
-#define P3D_RG_TX_IMPEL_VAL(x) ((0x1f & (x)) << 24)
#define U3P_U3_PHYD_IMPCAL1 0x014
#define P3D_RG_FORCE_RX_IMPEL BIT(31)
#define P3D_RG_RX_IMPEL GENMASK(28, 24)
-#define P3D_RG_RX_IMPEL_VAL(x) ((0x1f & (x)) << 24)
#define U3P_U3_PHYD_RSV 0x054
#define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12)
#define U3P_U3_PHYD_CDR1 0x05c
#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
-#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
-#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
#define U3P_U3_PHYD_RXDET1 0x128
#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
-#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9)
#define U3P_U3_PHYD_RXDET2 0x12c
#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
-#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x))
#define U3P_SPLLC_XTALCTL3 0x018
#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
@@ -229,10 +196,8 @@
#define U3P_U2FREQ_FMCR0 0x00
#define P2F_RG_MONCLK_SEL GENMASK(27, 26)
-#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26)
#define P2F_RG_FREQDET_EN BIT(24)
#define P2F_RG_CYCLECNT GENMASK(23, 0)
-#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x))
#define U3P_U2FREQ_VALUE 0x0c
@@ -249,60 +214,45 @@
#define PHYD_CTRL_SIGNAL_MODE4 0x1c
/* CDR Charge Pump P-path current adjustment */
#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
-#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
-#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
#define PHYD_DESIGN_OPTION2 0x24
/* Symbol lock count selection */
#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
-#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
#define PHYD_DESIGN_OPTION9 0x40
/* COMWAK GAP width window */
#define RG_TG_MAX_MSK GENMASK(20, 16)
-#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
/* COMINIT GAP width window */
#define RG_T2_MAX_MSK GENMASK(13, 8)
-#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
/* COMWAK GAP width window */
#define RG_TG_MIN_MSK GENMASK(7, 5)
-#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
/* COMINIT GAP width window */
#define RG_T2_MIN_MSK GENMASK(4, 0)
-#define RG_T2_MIN_VAL(x) (0x1f & (x))
#define ANA_RG_CTRL_SIGNAL1 0x4c
/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
-#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
#define ANA_RG_CTRL_SIGNAL4 0x58
#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
-#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
/* Loop filter R1 resistance adjustment for Gen1 speed */
#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
-#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
#define ANA_RG_CTRL_SIGNAL6 0x60
/* I-path capacitance adjustment for Gen1 */
#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
-#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
-#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
/* RX Gen1 LEQ tuning step */
#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
-#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
-#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
-#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
/* PHY switch between pcie/usb3/sgmii/sata */
#define USB_PHY_SWITCH_CTRL 0x0
@@ -414,9 +364,9 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
/* set cycle count as 1024, and select u2 channel */
tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
- tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
+ tmp |= FIELD_PREP(P2F_RG_CYCLECNT, U3P_FM_DET_CYCLE_CNT);
if (tphy->pdata->version == MTK_PHY_V1)
- tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
+ tmp |= FIELD_PREP(P2F_RG_MONCLK_SEL, instance->index >> 1);
writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
@@ -449,8 +399,8 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
tphy->src_ref_clk, tphy->src_coef);
/* set HS slew rate */
- mtk_phy_update_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
- PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val));
+ mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
+ calibration_val);
/* disable USB ring oscillator */
mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN);
@@ -460,33 +410,30 @@ static void u3_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
struct u3phy_banks *u3_banks = &instance->u3_banks;
+ void __iomem *phya = u3_banks->phya;
+ void __iomem *phyd = u3_banks->phyd;
/* gating PCIe Analog XTAL clock */
mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3,
XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD);
/* gating XSQ */
- mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_DA_REG0,
- P3A_RG_XTAL_EXT_EN_U3, P3A_RG_XTAL_EXT_EN_U3_VAL(2));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG0, P3A_RG_XTAL_EXT_EN_U3, 2);
- mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_REG9,
- P3A_RG_RX_DAC_MUX, P3A_RG_RX_DAC_MUX_VAL(4));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_REG9, P3A_RG_RX_DAC_MUX, 4);
- mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_REG6,
- P3A_RG_TX_EIDLE_CM, P3A_RG_TX_EIDLE_CM_VAL(0xe));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_REG6, P3A_RG_TX_EIDLE_CM, 0xe);
mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_CDR1,
P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1,
- P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3));
+ FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) |
+ FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3));
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_LFPS1,
- P3D_RG_FWAKE_TH, P3D_RG_FWAKE_TH_VAL(0x34));
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_LFPS1, P3D_RG_FWAKE_TH, 0x34);
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
- P3D_RG_RXDET_STB2_SET, P3D_RG_RXDET_STB2_SET_VAL(0x10));
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET1, P3D_RG_RXDET_STB2_SET, 0x10);
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
- P3D_RG_RXDET_STB2_SET_P3, P3D_RG_RXDET_STB2_SET_P3_VAL(0x10));
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET2, P3D_RG_RXDET_STB2_SET_P3, 0x10);
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
}
@@ -500,11 +447,9 @@ static void u2_phy_pll_26m_set(struct mtk_tphy *tphy,
if (!tphy->pdata->sw_pll_48m_to_26m)
return;
- mtk_phy_update_bits(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV,
- PA0_USB20_PLL_PREDIV_VAL(0));
+ mtk_phy_update_field(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, 0);
- mtk_phy_update_bits(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW,
- PA2_RG_U2PLL_BW_VAL(3));
+ mtk_phy_update_field(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, 3);
writel(P2R_RG_U2PLL_FBDIV_26M, com + U3P_U2PHYA_RESV);
@@ -550,7 +495,7 @@ static void u2_phy_instance_init(struct mtk_tphy *tphy,
/* DP/DM BC1.1 path Disable */
mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN);
- mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, PA6_RG_U2_SQTH_VAL(2));
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, 2);
/* Workaround only for mt8195, HW fix it for others (V3) */
u2_phy_pll_26m_set(tphy, instance);
@@ -653,43 +598,39 @@ static void pcie_phy_instance_init(struct mtk_tphy *tphy,
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0,
P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
- P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2));
+ FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) |
+ FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2));
/* ref clk drive */
- mtk_phy_update_bits(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP,
- P3A_RG_CLKDRV_AMP_VAL(0x4));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, 0x4);
- mtk_phy_update_bits(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF,
- P3A_RG_CLKDRV_OFF_VAL(0x1));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, 0x1);
/* SSC delta -5000ppm */
- mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H,
- P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H, 0x3c);
- mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H,
- P3A_RG_PLL_DELTA_PE2H_VAL(0x36));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H, 0x36);
/* change pll BW 0.6M */
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG5,
P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H,
- P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1));
+ FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) |
+ FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1));
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG4,
P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H,
- P3A_RG_PLL_BC_PE2H_VAL(0x3));
+ FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3));
- mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H,
- P3A_RG_PLL_IR_PE2H_VAL(0x2));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H, 0x2);
- mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H,
- P3A_RG_PLL_BP_PE2H_VAL(0xa));
+ mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H, 0xa);
/* Tx Detect Rx Timing: 10us -> 5us */
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
- P3D_RG_RXDET_STB2_SET, P3D_RG_RXDET_STB2_SET_VAL(0x10));
+ mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
+ P3D_RG_RXDET_STB2_SET, 0x10);
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
- P3D_RG_RXDET_STB2_SET_P3, P3D_RG_RXDET_STB2_SET_P3_VAL(0x10));
+ mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
+ P3D_RG_RXDET_STB2_SET_P3, 0x10);
/* wait for PCIe subsys register to active */
usleep_range(2500, 3000);
@@ -730,38 +671,38 @@ static void sata_phy_instance_init(struct mtk_tphy *tphy,
/* charge current adjustment */
mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL6,
RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK,
- RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a));
+ FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) |
+ FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a));
- mtk_phy_update_bits(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK,
- RG_CDR_BIRLTD0_GEN1_VAL(0x18));
+ mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK, 0x18);
- mtk_phy_update_bits(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK,
- RG_CDR_BIRLTD0_GEN3_VAL(0x06));
+ mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK, 0x06);
mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL4,
RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK,
- RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07));
+ FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) |
+ FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07));
mtk_phy_update_bits(phyd + PHYD_CTRL_SIGNAL_MODE4,
RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK,
- RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02));
+ FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) |
+ FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02));
- mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK,
- RG_LOCK_CNT_SEL_VAL(0x02));
+ mtk_phy_update_field(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK, 0x02);
mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9,
RG_T2_MIN_MSK | RG_TG_MIN_MSK,
- RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04));
+ FIELD_PREP(RG_T2_MIN_MSK, 0x12) |
+ FIELD_PREP(RG_TG_MIN_MSK, 0x04));
mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9,
RG_T2_MAX_MSK | RG_TG_MAX_MSK,
- RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e));
+ FIELD_PREP(RG_T2_MAX_MSK, 0x31) |
+ FIELD_PREP(RG_TG_MAX_MSK, 0x0e));
- mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK,
- RG_IDRV_0DB_GEN1_VAL(0x20));
+ mtk_phy_update_field(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK, 0x20);
- mtk_phy_update_bits(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK,
- RG_EQ_DLEQ_LFI_GEN1_VAL(0x03));
+ mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03);
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
}
@@ -857,33 +798,33 @@ static void u2_phy_props_set(struct mtk_tphy *tphy,
mtk_phy_set_bits(com + U3P_U2PHYBC12C, P2C_RG_CHGDT_EN);
if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src)
- mtk_phy_update_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
- PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src));
+ mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
+ instance->eye_src);
if (instance->eye_vrt)
- mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL,
- PA1_RG_VRT_SEL_VAL(instance->eye_vrt));
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL,
+ instance->eye_vrt);
if (instance->eye_term)
- mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL,
- PA1_RG_TERM_SEL_VAL(instance->eye_term));
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL,
+ instance->eye_term);
if (instance->intr) {
if (u2_banks->misc)
mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1,
MR1_EFUSE_AUTO_LOAD_DIS);
- mtk_phy_update_bits(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
- PA1_RG_INTR_CAL_VAL(instance->intr));
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
+ instance->intr);
}
if (instance->discth)
- mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH,
- PA6_RG_U2_DISCTH_VAL(instance->discth));
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH,
+ instance->discth);
if (instance->pre_emphasis)
- mtk_phy_update_bits(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP,
- PA6_RG_U2_PRE_EMP_VAL(instance->pre_emphasis));
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP,
+ instance->pre_emphasis);
}
/* type switch for usb3/pcie/sgmii/sata */
@@ -1032,23 +973,23 @@ static void phy_efuse_set(struct mtk_phy_instance *instance)
case PHY_TYPE_USB2:
mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, MR1_EFUSE_AUTO_LOAD_DIS);
- mtk_phy_update_bits(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
- PA1_RG_INTR_CAL_VAL(instance->efuse_intr));
+ mtk_phy_update_field(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
+ instance->efuse_intr);
break;
case PHY_TYPE_USB3:
case PHY_TYPE_PCIE:
mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_RSV, P3D_RG_EFUSE_AUTO_LOAD_DIS);
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL,
- P3D_RG_TX_IMPEL_VAL(instance->efuse_tx_imp));
+ mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL,
+ instance->efuse_tx_imp);
mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
- mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL,
- P3D_RG_RX_IMPEL_VAL(instance->efuse_rx_imp));
+ mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL,
+ instance->efuse_rx_imp);
mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
- mtk_phy_update_bits(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR,
- P3A_RG_IEXT_INTR_VAL(instance->efuse_intr));
+ mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR,
+ instance->efuse_intr);
break;
default:
dev_warn(dev, "no sw efuse for type %d\n", instance->type);
--
2.18.0
More information about the linux-phy
mailing list